581 Results
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
This application note explains a compact and versatile MIMO test solution for any common broadcast standard with real time fading including the simulation of channel correlation for a 1x4 MIMO system.
11-Oct-2017 | AN-No. 1GP114
Air Traffic Control (ATC) radar, military Air Traffic Surveillance (ATS) radar and meteorological radar operate in S-Band frequency range. In fact 4G communication systems such as Long Term Evolution (LTE) make also use of these frequencies.
28-Mar-2014 | AN-No. 1MA211
Two R&S ETL TV analyzers or two R&S ETC compact TV analyzers are used to measure the receive level of a car antenna against that of a reference antenna. The R&S BCDRIVE broadcast drive test software exports measured data for display in Google Earth.
19-Feb-2015
Reliable small cell planning using LTE test transmitter
09-Feb-2017 | AN-No. 1MA297
Its dual-path concept plus its ability to duplicate baseband signals make the R&S®SMW200A vector signal generator ideal for efficient GSM/EDGE AMsuppression conformance testing.
28-Feb-2017
This paper will discuss several measurement settings which affect measurement speed and provide suggestions on improving this overall speed.
08-Oct-2020 | AN-No. GFM354
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
Storing and Loading Complete Test Receiver Data Records via IEC/IEEE-Bus
18-Jan-2002 | AN-No. 1EE20
The R&S®ZNB vector network analyzer together with the R&S®HF907 double-ridged waveguide horn antenna provides fast and accurate TD SVSWR measurements in line with ANSI C63.25.
06-Aug-2018
Calibration and Verification Solution
The UWB (Ultra-Wideband) technology is a short range wide-band radio technology specified for device to device communication operating in unlicensed spectrum. It is an RF positioning technology that enables accurate and secure peer-to-peer ranging between mobile devices with robust resistance to interference while consuming very low energy and coexisting well with other radio communication systems. UWB is used for a variety of different applications, such as asset tracking, secure payment, personal tracker, real time location services and keyless access and start of a vehicle etc. According to ABI Research forecasts, there will be well over 1 billion UWB annual device shipments by 2026. Almost every smart phone shipped in 2026 will support UWB services.Talking about testing aspect of a UWB device, in general two test methodologies can be adopted as other wireless products, either the traditional testing mode (so-called conducted test mode) with wired RF connection between the test measurement equipment and device under test (DUT) or over the air (OTA) test mode in an OTA anechoic chamber. Sometimes, it is not always possible or necessary to perform the tests under conducted mode due to the limiting factors, e.g. cost, space, complexity and direct access to the RF connectors of the product. In this case, OTA testing is then becoming a non-evitable approach. Moreover, OTA testing reflects the usage of DUT in a real condition.In this application note, R&S® OTA test solution covering transmitter (Tx), receiver (Rx) and Time of Flight (ToF) testing in Wireless Automated Testing (WMT) environment is described. The measurement results throughout the whole document are based on NXP Trimension™ NCJ29D5 UWB automotive IC.
12-Apr-2023 | AN-No. 1SL394
This application note explains how to setup R&S®AdVISE to monitor the temperature of an EUT by using an infrared camera.
14-Sep-2020 | AN-No. 1S008
In this paper a rapid characterization of high speed digital channels using a multiport VNA is demonstrated.The VNA is a major tool in the field of communication and signal processing.
18-Mar-2020 | AN-No. 1EZ83_0E
Test solution for multi-antenna EW receivers
22-Dec-2021 | AN-No. 1GP125
This Application Note describes the operating principle of DME (Distance Measurement Equipment) that is used for distance measurement in aviation. It also describes various test scenarios for the maintenance of a DME transponder.
26-Feb-2009 | AN-No. 1GP74
This application note focuses on coaxial connectors found in RF and microwave applications, providing general information on the available types.
09-Apr-2015 | AN-No. 1MA99
This application note describes the necessary settings in the user interface of the R&S® Broadcast Test Center BTC which supports the new “Next Generation Broadcast Standard ATSC 3.0” with BTC firmware version 2.20 and later.
27-Mar-2018 | AN-No. 1GP119
Doc.A/74 ATSC Receiver Performance Tests Made Easy with the R&S<sup>®</sup> SFU Broadcast Test System and the R&S<sup>®</sup> SFE Broadcast Tester
27-Sep-2012 | AN-No. 7BM71
WLAN Tests According to Standard 802.11a/b/g
28-Jul-2004 | AN-No. 1MA69
Rohde & Schwarz offers a powerful, wideband test solution covering millimeterwave bands (including the 5G bands) to characterize the integrated amplifiers.
08-Jan-2019
Rohde & Schwarz offers a flexible test solution for the high demands of R&D and highthroughput production environments.
21-Mar-2017
Rohde & Schwarz presents the R&S®ATS1000 antenna test system, a highly accurate solution for testing 5G antennas up to mmWave frequencies in a mobile shielded chamber.
17-Oct-2017
R&S®SBT server based testing and fast RF instruments allow shorter characterization times and faster production testing while maintaining quality.
08-Jun-2020
Operation Guide for HSUPA Test Setup according to 3GPP TS 34.121
07-Oct-2009 | AN-No. 1CM73
The R&S®SMBV100B GNSS simulator and the AVL DRIVINGCUBE™ toolchain create new possibilities for driver assistance systems and autonomous driving.
09-Jan-2020
This Application Note describes how to set up the EMC test software R&S®ELEKTRA and the visual inspection softwareR&S®AdVISE for remote testing.
23-Jul-2020 | AN-No. 1S005
This application note provides an overview of the MHL technology and also describes the Rohde & Schwarz compliance test solution for the system part of the current MHL2.0 standard version.
14-May-2013 | AN-No. 7BM83
Generation of Test Signals for IS-136 (NADC) with Signal Generator SME
01-Jul-1999 | AN-No. 1GPAN35