Downloads

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.

Englisch - 26.05.2020

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

Englisch - 24.12.2017

This application note provides a brief introduction into the capabilities of the Rohde & Schwarz Vector Signal Generators (VSG) to create user defined digitally modulated signals called Custom Digital Modulation (CDM).

Englisch - 24.07.2017

This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB.

Englisch - 12.06.2017

This application note describes how all required transmitter (Tx) tests can be performed quickly and easily by using signal and spectrum analyzers.

Englisch - 11.05.2016

Generation of IEEE 802.15.4 Signals

Englisch - 08.01.2016

Noise Power Ratio is a tool for WinIQSIM™ to generate noise power ratio stimulus signals and measure the resulting noise power ratio of a device.

Englisch - 06.11.2015

A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer.

Englisch - 27.02.2015

This application note describes how transmitter (Tx) tests (TS25.141 Chapter 6) can be performed quickly and easily by using signal and spectrum analyzers from Rohde & Schwarz.

Englisch - 21.10.2014

This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.

Englisch - 21.10.2014

This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

Englisch - 09.10.2014

This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.

Englisch - 03.09.2014

Assisting Tools for Operation of Windows-Based T&M Instruments

Englisch - 13.06.2013

This application note explains how to set up a vector signal generator for LTE FDD repeater conformance testing accordingg to various test cases defined in the 3GPP Technical Specification 36.143.

Englisch - 26.04.2013

This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

Englisch - 26.04.2013

The R&S MATLAB® Toolkit for Signal Generators provides scripts and routines for remote controlling Rohde & Schwarz signal generators. For example, it includes a MATLAB® script that turns I/Q vectors into the R&S waveform file format for use with an ARB generator.

Englisch - 25.04.2013

1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.

Englisch - 25.04.2013

IQWizard - IQ Signal Measurement and Conversion

Englisch - 25.04.2013

This application note provides a brief summary of the transmission modes (TM) in LTE and describes the beamforming measurements for base stations (BS) and user equipment (UE). The T&M options using various Rohde & Schwarz instruments are also presented.

Englisch - 25.04.2013

Simulating realtime fading with R&S® vector signal generators made easy with a multitude of standard-compliant, preconfigured fading scenarios. This application note gives a brief introduction to fading and explains how to use the channel simulators in custom applications.

Englisch - 25.04.2013

Testing HSPA+

Englisch - 25.04.2013

TETRA, the TErrestrial Trunked RAdio, is the professional mobile radio standard (PMR) used world wide by governmental safety and security authorities and organizations, as well as by private utilities from energy suppliers through to transport.

Englisch - 25.04.2013

Testing LTE MIMO Signals using a R&S RTO Oscilloscope

Englisch - 24.04.2013

This application note provides insight into some of these specifications and how test and measurement equipment can simplify the task of deriving requirements for RF sub-systems.

Englisch - 10.04.2013

This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Apple iPad as if working on it locally.

Englisch - 28.03.2013

Development Hints and Best Practices for Using Instrument Drivers

Englisch - 01.01.2013

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

Englisch - 20.12.2012

In this application note we explain how to test FPGA-based hardware emulators using Rohde & Schwarz vector signal generators for creating suitable real-time test signals at reduced sample rates. We further explain how to correctly adapt AWGN signal generation and fading simulation for “slow I/Q”.

Englisch - 10.12.2012

802.11ac Technology Introduction

Englisch - 23.05.2012

This application note explains how to play back multiple test signals fast and flexibly using an ARB generator from Rohde & Schwarz. Waveform sequencing enables high-speed operation for production testing.

Englisch - 29.02.2012