R&S®PWC200 Plane Wave Converter

For 5G massive MIMO base station testing

R&S®PWC200
Lightbox öffnen
R&S®PWC200

Key facts

  • Phased antenna array to form plane waves within an adjustable quiet zone (e.g. 1m ø)
  • No near-field to far-field transformation required
  • Requires 4 times less space compared to CATR based systems
  • Built in self test features
  • For R&D and production testing

Instantaneous measurements of far-field characteristics at close distance to the 5G massive MIMO base station

The R&S®PWC200 Plane Wave Converter is a bidirectional array of 156 wideband Vivaldi antennas placed in the radiating near field of the device under test (DUT). The phased antenna array can form planar waves inside a specified quiet zone within the radiating near field of the 5G massive MIMO base station for realtime radiated power and transceiver measurements (EVM, ACLR, SEM, etc.).

Features & benefits

Compact base station test system design

Far-field measurements in near-field range

The R&S®PWC200 can drastically reduce the measurement distance required to obtain far-field characterization. OTA testing for 5G massive MIMO base stations with an aperture of 1 m at a frequency of 3.5 GHz can be done at a distance of only 1.5 m. In comparison, a direct far field measurement requires a distance of 23.5 m. The R&S®PWC200 allows test labs and manufacturers to save on floor space without compromising on measurement accuracy.

R&S®PWC200 Plane Wave Converter
Open Lightbox

R&S®PWC200 with reference antenna

Versatile quiet zone simulation

Easy configurable quiet zone diameter and test distance

The R&S®PWC200 allows synthesis of electromagnetic fields, which are programmed when preparing the test setup. The R&S®AMS32-K61 field simulation software provides simulations with various parameters, such as the desired quiet zone diameter and test distance. This flexibility enables the R&S®PWC200 to measure base stations of different sizes with the same static test setup.

R&S®PWC200 Plane Wave Converter
Open Lightbox

Field simulation results

Example results of electric field distribution at 3.5 GHz in the quiet zone at a distance of 1.5 m from the antenna array

Automated field calibration

Fast, motionless and automated self-calibration in the field with the R&S®AMS32 software

The R&S®AMS32-K65 field and path loss calibration software works together with the R&S®PWC-CAA1 calibration antenna to perform automated calibration and verification of the R&S®PWC200 in the field. This process does not require the opposite antennas to be moved. The high measurement accuracy can be maintained and verified from time to time in a simple and quick manner.

R&S®PWC200 Plane Wave Converter
Open Lightbox

R&S®PWC200 with R&S®PWC-CAA1

Calibration and verification system setup with the R&S®PWC200 on the left and the R&S®PWC-CAA1 calibration antenna on the right.

Electronic near-field scanning

Automated power factor calibration and power density measurement

The R&S®AMS32-K69 power density measurement software measures the planar distribution of power density radiated by a 5G massive MIMO base station. This feature is especially useful in production testing without positioning systems. The R&S®PWC200 can easily verify the electronically steered beam of a BS for small tilt angles of +/- 10° and show the peak area.

R&S®PWC200 Plane Wave Converter
Open Lightbox

Power factors (PF) spatial distribution graphics

Examples of RMS (left) and peak (right) power densities. Spatial distribution for a TDD signal at 3.4 GHz.

R&S®PWC200 software tools

Comprehensive R&S®PWC 200 software tools allow easy configuration

The R&S®PWC200 can be controlled by either the R&S®AMS32 system software or customer-specific OTA software. Four R&S®AMS32 tools are available as standalone executable programs: field simulation (R&S®AMS32-K61), field & path loss calibration (R&S®AMS32-K65), self-test & hardware verification (R&S®AMS32-K67) and power density measurements (R&S®AMS32-K69). The user interface is clearly arranged and the configuration data sets are visible in CSV file format.

R&S®PWC200 Plane Wave Converter
Open Lightbox

R&S®PWC200 system software architecture

Related solutions

5G NR testing

More information

5G OTA/massive MIMO testing

More information

IoT testing

More information

Informationen anfordern

Haben Sie noch Fragen? Benötigen Sie noch zusätzliche Informationen? Nutzen Sie das Formular und wir werden ihnen umgehend antworten.

Marketing-Einverständniserklärung

Ich möchte Informationen von Rohde & Schwarz erhalten per

Was bedeutet das im Einzelnen?

Ich bin damit einverstanden, dass die ROHDE & SCHWARZ GmbH & Co. KG und die im Impressum dieser Website genannte, ROHDE & SCHWARZ zugehörige Gesellschaft oder Niederlassung, mich über den gewählten Kommunikationskanal (E-Mail oder Post) zu Marketing- und Werbezwecken kontaktiert (z.B. zur Übersendung von Informationen über Sonderangebote und Rabattaktionen), die in Zusammenhang mit Produkten und Lösungen aus den Bereichen Messtechnik, sichere Kommunikation, Monitoring and Network Testing, Rundfunk- und Medientechnik sowie Cybersicherheit stehen, aber nicht auf diese beschränkt sind.

Ihre Rechte

Diese Einverständniserklärung kann jederzeit durch Senden einer E-Mail, in deren Betreffzeile "Unsubscribe" steht, an news@rohde-schwarz.com, widerrufen werden. Darüber hinaus enthält jede von uns versandte E-Mail einen Link, durch den das Abbestellen zukünftiger Werbung per E-Mail möglich ist. Weitere Einzelheiten zur Verarbeitung personenbezogener Daten und zum Widerrufsverfahren finden sich in unserer Datenschutzerklärung..

Ihre Anfrage wurde erfolgreich versendet. Wir nehmen in Kürze Kontakt mit Ihnen auf.
Leider ist bei der Übermittlung der Daten ein Fehler aufgetreten. Bitte versuchen Sie es zu einem späteren Zeitpunkt erneut.
Allgemeine Informationen und rechtliche Hinweise

Unverbindliche Preisempfehlung des Herstellers (UVP). Der dargestellte Preis versteht sich ohne USt. Preise und Angebote richten sich nur an Unternehmer und nicht an private Verbraucher.