Looks like you're from the United States. Right now, you are on our site for Australia.

Switch to the United States
background
RS-LogoRS-Logo Mini
  • Contact
  • Location: AU - Australia
Choose Location
Contact

Application Notes for R&S®RTM2000

Learn how to configure Rohde & Schwarz products to fit your application.

  • Applications
More downloads
Filter by Content
  • Application Note 5
  • Application Card 3
Website Content

Website Content

Find more relevant information about our Products and Solutions.

8 Results

R&S®VISA

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.

26-May-2020 | AN-No. 1DC02

RSCommander

Versatile Software Tool for Rohde & Schwarz Instruments

RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.

24-Dec-2017 | AN-No. 1MA074

Importance of deep memory in oscilloscopes

Deep memory in an oscilloscope ensures that long waveforms are captured with high resolution right down to the details thanks to a high sustained sample rate. Users can be confident that they are not ‘missing anything’. They benefit from viewing longer periods of time and quickly finding signal anomalies or important events.

21-Mar-2017

Methods to obtain trusted RMS results on the R&S®RTM

RMS is one of the most common parameters in test and measurement. Mathematically, it is the quadratic mean of continuously varying values (waveform). Especially when quantifying power, RMS simplifies the calculation as the polarity of the voltage and direction of the current can be disregarded.

17-Aug-2015

Measurements on RF and AF Filters with Rohde & Schwarz Value Instruments

This application note describes the basic frequency filter measurements that are often required during service repairs, during development of simple circuits and for training purposes. These measurements do not always require high-end T&M equipment. Instruments in this class typically offer a very wide range of measurement functions coupled with the best-possible RF performance. However, these features are not necessary for simple applications. This application note therefore describes measurements using instruments from the cost-effective Rohde & Schwarz Value Instruments series. The instruments in this series offer the measurement accuracy demanded by quality-conscious users plus easy operation and all of the functionality needed for everyday measurement tasks.

27-Mar-2015 | AN-No. 1MA243

The R&S®RTO/RTP in accelerator physics

In accelerator physics, pulsed signals frequently need to be measured. The digital trigger and low noise frontend of the R&S®RTO/RTP digital oscilloscope make it possible to perform the high precision measurements needed to characterize the experimental setup. Several measurement functions specially developed for accelerator physics labs support detailed signal analysis.

17-Dec-2013

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.

20-Dec-2012 | AN-No. 1MA035

Introduction to Attribute Based Instrument Drivers

This white paper introduces a novel attribute based architecture for VXIplug&play instrument drivers. The presented architecture uses the attribute based concept of IVI-C instrument drivers to introduce a two-layer design for VXIplug&play instrument drivers. Moreover the use of attributes is shown for the Rohde & Schwarz Spectrum Analyzer (rsspecan) instrument driver.

01-Dec-2012 | AN-No. 1MA170

background
Facebook
YouTube
RSS Feeds
LinkedIn
Twitter
Rohde & Schwarz (Australia) Pty Ltd

Rohde & Schwarz (Australia) Pty Ltd was established in 1981. The company is 100% owned subsidiary of Rohde & Schwarz GmbH, Munich, Germany.

Address

Rohde & Schwarz (Australia) Pty Ltd

Unit 2,75 Epping Road, North Ryde NSW 2113, Australia

Contact

+61 (02) 8874 5100

sales.australia@rohde-schwarz.com

© 2022 Rohde & Schwarz

  • Cookie Information
  • Imprint
  • Statement of privacy
  • Terms & conditions
  • Jobs & Career
  • Terms of use