R&S®AREG100A automotive radar echo generator

R&S®AREG100A automotive radar echo generator
Open Lightbox
R&S®AREG100A automotive radar echo generator
Open Lightbox
R&S®AREG100A automotive radar echo generator, application image R&S®AREG100A automotive radar echo generator, application image

Key facts

  • Supports 24 GHz, 77 GHz and 79 GHz automotive radar sensors
  • Future proof with instantaneous bandwidths of up to 4 GHz
  • 4 m minimum artificial object distance for short range radar testing
  • Up to 4 artificial objects in fixed distances at the same time
  • Controllable radial velocity for each artificial object individually or for all artificial objects together
  • 3-year warranty extension

Reliable production testing of automotive radar sensors made easy

The R&S®AREG100A Automotive Radar Echo Generator is a smart and robust solution for testing automotive radar sensors in production. With the R&S®AREG100A, production engineers profit from a perfect balance of flexibility of test cases and at the same time simple and robust operation.

I    Supports all automotive radar bands
I    4 GHz instantaneous bandwidth
I    4 m minimum artificial object distance

Features & benefits

Reliable and flexible echo generation

  • Install up to four different, customer defined fixed delay lines to simulate unrelated object echoes
  • Simulate echoes with minimum delay for short range radar (SRR) sensor tests
  • Simulate echoes for long range radar (LRR) sensor tests
  • Select additional Doppler offsets to simulate radial velocity for each artificial object individually or for all artificial objects together

Open Lightbox

With the R&S®AREG100A it has never been easier to monitor the quality of automotive radar sensors in mass production.

Test today’s and tomorrow’s radar sensors

  • Choose a 24 GHz ISM band frontend, an E-band frontend or both together for sequential operation
  • Profit from a future proof wideband E-band frontend with 4 GHz instantaneous bandwidth for short range radar (SRR) sensor test
  • All frontends in a single antenna configuration for superior MIMO testing performance or in a two antenna configuration with high RX/TX isolation for lowest ringaround.

Open Lightbox

R&S®AREG100A with single antenna frontend for reliable testing of MIMO radar sensors

Ready for RED

  • Measure the sensor’s equivalent radiated isotropic power (EIRP) in line with the applicable standards with a connected R&S NRP8S(N) power sensor
  • Verify robustness of radar sensors against in-band interferers with a connected analog or vector signal generator
  • Measure occupied bandwidth and unwanted emissions with a connected signal and spectrum analyzer

Open Lightbox

The R&S®AREG100A and the R&S®FSW8 are the perfect team for convenient measurement of radar signal parameters in the E band.

Simple and stable operation

  • Linux based operating system for maximum software stability
  • Optimized for minimum footprint with just 3 HUs
  • SCPI macro recorder with automatic code generator
  • Intuitive GUI for user friendly operation

Open Lightbox

Simple man-machine interface for user friendly configuration with intuitive GUI and toch screen control

Specifications
Frequency
Frequency range R&S®AREG-B124S/-B124D 24 GHz to 24.25 GHz, single or dual antenna
R&S®AREG-B177S/-B177D 76 GHz to 77 GHz, single or dual antenna
R&S®AREG-B181S/-B181D 76 GHz to 81 GHz, single or dual antenna
Signal bandwidth
Instantaneous bandwidth R&S®AREG-B124S/-B124D 250 MHz
R&S®AREG-B177S/-B177D 1 GHz
R&S®AREG-B181S/-B181D 4 GHz from 76 GHz to 81 GHz (configurable: either 76 GHz to 80 GHz or 77 GHz to 81 GHz)
Artificial objects
Object type fixed distance
Total number of objects 4
Object distances up to one R&S®AREG-B61 option 4 m (incl. 0.8 m air gap between R&S®AREG frontend and radar under test)
up to three R&S®AREG-B62 options, distance for each option has to be defined during ordering process 5 m to 300 m (incl. 0.8 m air gap between R&S®AREG frontend and radar under test); customer definable during ordering process
Air gap to device under test It is recommended that antennas be positioned in far field;
customer definable during ordering process
Radial velocity
Doppler frequency shift With R&S®AREG-K799 Doppler frequency shift for all artificial objects together yes
Individual Doppler frequency shift With R&S®AREG-B60 Doppler frequency shift for each artificial object individually yes
Velocity setting range R&S®AREG-B60 and R&S®AREG-K799 +/- 500 km/h
Level
Absolute maximum RX power at frontend RX waveguide port R&S®AREG-B124S/-B124D 0 dBm (nom.)
R&S®AREG-B124S/-B124D –7 dBm (nom.)
R&S®AREG-B181S/-B181D –7 dBm (nom.)
Maximum TX power at frontend TX waveguide port R&S®AREG-B124S/-B124D ≥ 15 dBm (meas.)
R&S®AREG-B177S/-B177D ≥ 20 dBm (meas.)
R&S®AREG-B181S/-B181D ≥ 18 dBm (meas.)
Receive/transmit gain control setting range all artificial objects together > 90 dB (meas.)
Receive/transmit gain control setting range each artificial object individually 55 dB (meas.)
Receive/transmit gain control step size 0.5 dB (nom.)
IF input/IF output
IF input/output interfaces with R&S®AREG-B17 option calibrated IF outputs on frontend and base unit;
calibrated IF input on base unit
IF input gain from auxiliary TX IF In port (at IF frequency) to frontend TX waveguide output (at RF frequency) R&S®AREG-B124S/-B124D, RF frequency = 24.125 GHz 20 dB (meas.)
R&S®AREG-B177S/-B177D, RF frequency = 76.5 GHz 20 dB (meas.)
R&S®AREG-B181S/-B181D, RF frequency = 78 GHz or 79 GHz 20 dB (meas.)
IF input compression P1dB level at TX IF In port (at IF frequency) R&S®AREG-B124D 1 dBm (meas.)
R&S®AREG-B177D 1 dBm (meas.)
R&S®AREG-B181D -5 dBm (meas.)
Connectivity
Remote control Ethernet
with R&S®AREG-B86 option GPIB, USB

Available options

Frequency band
Product
Description
R&S®AREG-B124D

Order number 1430.5100.02

Description

Dual Antenna Frontend 24 GHz to 24.25 GHz

R&S®AREG-B124S

Order number 1430.5000.02

Description

Single Antenna Frontend 24 GHz to 24.25 GHz

R&S®AREG-B177D

Order number 1430.5700.02

Description

Dual Antenna Frontend 76 GHz to 77 GHz

R&S®AREG-B177S

Order number 1430.5752.02

Description

Single Antenna Frontend 76 GHz to 77 GHz

R&S®AREG-B181D

Order number 1430.5152.02

Description

Dual Antenna Frontend 76 GHz to 81 GHz

R&S®AREG-B181S

Order number 1430.5052.02

Description

Single Antenna Frontend 76 GHz to 81 GHz

Artificial objects
Product
Description
R&S®AREG-K799

Order number 1437.2488.02

Description

Doppler frequency shift for generating a common radial velocity for all objects

R&S®AREG-B60

Order number 1430.5552.02

Description

Doppler frequency shift for generating an individual radial velocity for each object

R&S®AREG-B61

Order number 1430.5317.02

Description

Short fixed object distance, 3.2 m + air gap

R&S®AREG-B62

Order number 1430.5369.02

Description

Fixed object distance, customer defined

Intermediate frequency ports and control interfaces
Product
Description
R&S®AREG-B17

Order number 1430.5200.02

Description

Analog IF input and output interfaces

R&S®AREG-B86

Order number 1430.5252.02

Description

GPIB/USB Remote Control Interface

Power sensors
Product
Description

Order number 1419.0006.02

Description

Three-path diode power sensor

For USB operation; Measurement range: 100 pW to 200mW; Frequency range: 10 MHz to 8 GHz; N (m) connector

Order number 1419.0012.02

Description

Three-path diode power sensor

Measurement range: 100 pW to 200 mW; Frequency range: 10 MHz to 8 GHz; N (m) connector

General accessories
Product
Description
R&S®WCA12-135

Order number 1700.3977.02

Description

Waveguide Coax Adapter WR12 to 1.35mm (f)

Waveguide Coax Adapter WR12 to 1.35 mm female with S-Parameter characterisation, WG stabilzation bracket for USB and LAN NRP power sensors 60 - 90 GHz 

Related videos

Application video: Accelerating ADAS-AD with Hardware-in-the-Loop Testing

02-Mar-2022

Phase-coherent multichannel pulse analysis

20-Jan-2021

Automotive radar testing in a compact antenna test range

20-Jan-2021

Innovative and simple solution for testing automotive radar sensors against interferers

05-Jul-2018

Accurate EIRP measurement of automotive radar sensors in line with RED

05-Jul-2018

Simple solution for radar echo generation and simultaneous radar transmit signal analysis

05-Jul-2018

End-of-line testing of automotive radar sensors in production made easy

05-Jul-2018

Reliable all-in-one test solution for automotive radar sensors

02-Jul-2018

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

3. Participation is free of charge and not dependent on the purchase of goods or services.

4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

Prize: 1x R&S®RTB2000 Digital Oscilloscope

6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.