R&S®ESH2-Z5 V-Network, 4 lines, 25 A

for RFI voltage measurements on three-phase EUTs

This is a discontinued product
Please note the following successor product(s):
  • Overview

Key Facts

  • Frequency range 9 kHz to 30 MHz
  • V-network in line with CISPR, EN, VDE, ANSI
  • Impedance (50 µH + 5Ω)//50Ω (magnitude and phase) in line with CISPR16-1-2:2006
  • Continuous current up to 4 x 25 A

Brief Description

The R&S®ESH2-Z5 four-line V-network meets the requirements of CISPR 16-1-2, VDE 0876 and ANSI C63.4 for V-networks with impedance in the frequency range 9 kHz to 30 MHz. It is used to measure RFI voltages on AC supply connections of EUTs and is based on air-core inductances.

Key Facts

  • Frequency range 9 kHz to 30 MHz
  • V-network in line with CISPR, EN, VDE, ANSI
  • Impedance (50 µH + 5Ω)//50Ω (magnitude and phase) in line with CISPR16-1-2:2006
  • Continuous current up to 4 x 25 A
  • Short time current (max. 2 min.) up to 4 x 50 A
  • Artificial hand and PE simulation network
  • Air-core design
  • Remote control via TTL levels (compatible with the R&S®EMI test receivers)
  • Calibrated to CISPR 16-1-2 and ANSI C63.4

Brief Description

The R&S®ESH2-Z5 four-line V-network meets the requirements of CISPR 16-1-2, VDE 0876 and ANSI C63.4 for V-networks with impedance in the frequency range 9 kHz to 30 MHz. It is used to measure RFI voltages on AC supply connections of EUTs and is based on air-core inductances. It contains an artificial hand as well as a PE simulating network that can be bypassed.

The maximum continuous current on all four connectors is 25 A. Up to two minutes, the maximum short-time current is 4 x 50 A. A built-in fan with its own AC supply provides automatically controlled or permanent cooling, whichever is required.

To allow it to be connected to the AC supply network and to the EUT, the R&S®ESH2-Z5 V-network is provided with five-way Cekon-type connectors. For single-phase applications, an additional Schuko-type connector is available on the front panel (max. continuous current 2 x 16 A).

The permissible operating voltage is 250 V rms (voltage to neutral in a three-phase system).

The phase of the V-network can be manually selected by means of a front panel switch or automatically via TTL control inputs which are compatible with the majority of Rohde & Schwarz test receivers. Various control cables are available for uses such as inside a shielded room.

Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Quote

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.
Please enter your phone number.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Get a Demo

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Request Information

Please enter your inquiry.
Please enter your first name.
Please enter your name.
Please enter a valid e-mail address.
Please enter your company name.
Please enter your city name.
Please enter your postal code.

Please enter your country.
Please enter the characters shown in the image
show captcha
The input was not correct.
Do not enter data in this field
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Feedback
Get in touch with Rohde & Schwarz!
Please tell us which topic.

Please enter your inquiry.
Contact information

Please enter your first name.

Please enter a valid e-mail address.

Please enter your name.
Security Response Code
show captcha

The input was not correct.
Do not enter data in this field
*Mandatory Field
International Website