|
Frequency
|
| Frequency range |
with the R&S®SGS-B106 option |
1 MHz to 6 GHz |
| |
with the R&S®SGS-B106 and R&S®SGS-B112 options |
1 MHz to 12.75 GHz |
| |
with the R&S®SGS-B106 and R&S®SGS-B112
options plus the R&S®SGU100A with the
R&S®SGU-B120 option |
10 MHz to 20 GHz |
| |
with the R&S®SGS-B106 and R&S®SGS-B112
options plus the R&S®SGU100A with the R&S®SGU-B120 option and R&S®SGU-B140
option |
10 MHz to 40 GHz |
| |
with the R&S®SGS-B106V option |
80 MHz to 6 GHz |
| |
with the R&S®SGS-B106V and R&S®SGS-B112V options |
80 MHz to 12.75 GHz |
| |
with the R&S®SGS-B106V and R&S®SGS-B112V options
plus the R&S®SGU100A with the R&S®SGU-B120V option |
10 MHz to 20 GHz |
| |
with the R&S®SGS-B106V and R&S®SGS-B112V options
plus the R&S®SGU100A with the R&S®SGU-B120V option and the R&S®SGU-B140V |
10 MHz to 40 GHz |
| Setting time |
with PCIe remote control |
| |
R&S®SGS100A alone |
< 500 μs |
| |
R&S®SGS100A together with R&S®SGU100A |
< 2 ms |
| Input frequency for external reference |
into R&S®SGS100A |
10 MHz, 100 MHz, 1000 MHz |
|
Level
|
| Specified level range |
for the R&S®SGS100A |
–10 dBm to +15 dBm (PEP)1) |
| |
with the R&S®SGS-B26 option |
–120 dBm to +15 dBm (PEP)1) |
| |
for the R&S®SGS100A together with the R&S®SGU100A |
| |
50 MHz < f ≤ 12 GHz (bypass mode) |
–10 dBm to +15 dBm (PEP)1) |
| |
12 GHz < f ≤ 20 GHz |
–10 dBm to +17 dBm (PEP)1) |
| |
12 GHz < f ≤ 40 GHz with the R&S®SGU-B140/B140V |
–10 dBm to +15 dBm (PEP)1) |
| |
for the R&S®SGS100A together with the R&S®SGU100A and the R&S®SGU-B26 option |
| |
50 MHz < f ≤ 12 GHz (bypass mode) |
–100 dBm to +13 dBm (PEP)1) |
| |
12 GHz < f ≤ 20 GHz |
–100 dBm to +15 dBm (PEP)1) |
| Level error |
Setting Characteristic: AUTO; temperature range from +18 °C to +33 °C |
| |
1 MHz ≤ f ≤ 3 GHz (R&S®SGS100A alone) |
< 0.5 dB |
| |
3 GHz < f ≤ 12.75 GHz (R&S®SGS100A alone) |
< 0.9 dB |
| |
12 GHz < f ≤ 20 GHz (R&S®SGS100A together with R&S®SGU100A), level > –30 dBm |
< 0.9 dB |
| Output impedance VSWR in 50 Ω system |
in full frequency range, with the R&S®SGS-B26
option (R&S®SGS100A alone) |
< 1.8 |
| |
in full frequency range (R&S®SGS100A together
with R&S®SGU100A) |
< 1.7 (meas.) |
| Setting time |
with PCIe remote control, Setting Characteristic: AUTO |
| |
R&S®SGS100A alone |
< 500 μs |
| |
R&S®SGS100A together with R&S®SGU100A |
< 2 ms (without switching of the mechanical attenuator) |
| |
R&S®SGS100A together with R&S®SGU100A plusR&S®SGU-B26 |
< 25 ms (with switching of the mechanical attenuator) |
|
Spectral purity
|
| Harmonics |
level ≤ 8 dBm, CW, I/Q wideband OFF |
< –30 dBc |
| Nonharmonics |
level > –10 dBm2), offset > 10 kHz from carrier,
f ≤ 1.5 GHz (for R&S®SGS100A) |
< –76 dBc |
| Subharmonics |
level > –10 dBm2), f ≤ 3 GHz |
< –76 dBc |
| Wideband noise |
1 MHz ≤ f ≤ 6 GHz and 10 MHz carrier offset,
6 GHz < f ≤ 12.75 GHz and 30 MHz carrier offset, auto mode, level > 5 dBm, 1 Hz measurement bandwidth, CW |
| |
R&S®SGS100A alone |
< –145 dBc |
| |
R&S®SGS100A together with R&S®SGU100A |
| |
CW, f ≤ 12 GHz |
< –140 dBc (meas.) |
| |
CW, f > 12 GHz |
< –142 dBc |
| |
CW, f > 19.5 GHz |
< –139 dBc (typ.) |
| SSB phase noise |
20 kHz carrier offset, 1 Hz measurement bandwidth |
| |
f = 1 GHz |
< –126 dBc; –130 dBc (typ.) |
| |
f = 10 GHz |
< –106 dBc; –110 dBc (typ.) |
|
I/Q modulation
|
| I/Q modulator bandwidth (RF) |
100 MHz < f ≤ 2.5 GHz, I/Q wideband |
40% of carrier frequency |
| |
2.5 GHz < f ≤ 12.25 GHz, I/Q wideband |
1 GHz |
| |
f > 12 GHz (R&S®SGS100A together with
R&S®SGU100A) |
2 GHz |
| Error vector |
measured with 16QAM, filter root cosine α = 0.5, 10 kHz symbol rate |
| |
f > 80 MHz, RMS, 10 kHz symbol rate (R&S®SGS100A alone) |
< (0.4 % + 0.2 % × f/GHz) |
| |
f > 12 GHz, RMS, 10 MHz symbol rate (R&S®SGS100A together with R&S®SGU100A) |
< (2 % + 0.04 % × f/GHz) |
| ACLR |
WCDMA 3GPP FDD, TM 1/64,
frequency range from 1800 MHz to 2200 MHz
(R&S®SGS100A alone) |
> 67 dB; 69.5 dB (meas.) |
|
Baseband bypass mode
|
| Frequency range |
|
1 MHz ≤ f ≤ 80 MHz |
| Specified level range |
R&S®SGS100A alone |
–5 dBm to +15 dBm |
| |
with the R&S®SGS-B26 option |
–120 dBm to +15 dBm |
|
Remote control
|
using Rohde & Schwarz instrument driver |
PCIe (single lane) |
| |
using SCPI 1999.5 or compatible command sets |
Ethernet (TCP/IP) 10/100/1000BaseT |
| |
using SCPI 1999.5 or compatible command sets |
USB 2.0 |
|
General data
|
| Power consumption |
R&S®SGS100A alone |
70 W (meas.) |
| |
R&S®SGU100A alone |
40 W (meas.) |
| Dimensions |
W × H × D, per unit |
250 mm × 52.5 mm × 401 mm
(9.84 in × 2.07 in × 15.79 in)
1 HU, ½ 19" rack width |
| Weight |
when fully equipped |
4.0 kg (8.82 lb) |
