168 Results
Programming examples for oscilloscopes.
05-May-2022
Rohde & Schwarz presents its latest test solutions for power electronics at PCIM Europe 2022The power electronics community will come together again at PCIM Europe in Nuremberg from May 10 to 12, 2022. Rohde & Schwarz is joining to demonstrate its latest test solutions for developers of power supplies and other power electronics. The company’s experts share their know-how about applications like stability analysis, power integrity and component testing as well as EMI debugging and EMI precompliance testing at the Rohde & Schwarz booth 452 in hall 7.
05-Mar-2024
Rohde & Schwarz at EMV 2024: Outstanding T&M solutions from the market leader in EMCAt the EMV show 2024 in Cologne, Rohde & Schwarz showcases a comprehensive range of EMC test and measurement solutions – ranging from standalone instruments and software to application-specific systems. The company dedicates a large part of the booth to demonstrations that show EMI compliance testing, EMC test automation, EMS immunity test, EMI debugging and EMF. The Rohde & Schwarz solutions are on display from March 12 to 14, 2024 at the Cologne exhibition center, hall 11.1, booth 106.
21-Mar-2022
Rohde & Schwarz at DesignCon 2022 presents latest innovations for high-speed digital applicationsAt DesignCon 2022, Rohde & Schwarz will showcase live demos covering industry trends in cooperation with industry experts such as Samtec, ataitec, Clear Signal Solutions, and more.
Rohde & Schwarz Manual for ScopeSuite Automation option. Describes the test procedures.
The Zoom function does not show any waveform data at specific settings, especially at slower timebases in combination with higher sample rates, High resolution and roll mode with more channels. The problem is gone if a lower sample rate is chosen.
03-May-2023
Rohde & Schwarz demonstrates solutions for particle accelerators at IPAC’23 in VeniceAt IPAC’23 in Venice, Italy, Rohde & Schwarz demonstrates solutions that meet high precision particle accelerator requirements, address challenges in elementary particle research, particle therapy applications, material characterization, precise beam forming and monitoring as well as safe storage.
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
The DUT operates in Test Mode 4 which is a PRBS sequence and it is exposed on a 125MHz disturber signal which comes out of theB6 signal generator which is integrated in the RTO6 oscilloscope. The ScopeSuite software provides a step by test foto guided test execution and reports the test results.
Verify the energy efficiency of your O-RAN radio units
19-Mar-2024
In addition the RTO6 can be used to monitor the communication between the two automotive Ethernet devices and also check the frequency response and spectrum of the noise signal source coming from the SMW. 1000BASE-T1, Signal Quality Indicator (SQI) 1000BASE-T1 interoperability test
27-Oct-2021
Rohde & Schwarz once again live at productronica 2021 with T&M equipment for R&D, verification and productionRohde & Schwarz is presenting its solutions live at productronica 2021, the leading global trade show for electronics development and production. The focus is on T&M equipment for latest technologies including automotive radar, satellite communications, Wi-Fi 7 and 5G. High throughput and low cost are essential in production environments, and Rohde & Schwarz solutions support exactly these goals. Trade show visitors will find the following Rohde & Schwarz highlights and more in hall A1, booth 375 at Messe München.
09-Nov-2022
Rohde & Schwarz next generation oscilloscope R&S MXO 4 on center stage at electronica 2022Rohde & Schwarz showcases at electronica 2022 (booth A3.307) the new R&S MXO 4 oscilloscope plus a wide range of test and measurement solutions tailored to developers and test engineers.
This document is divided in two parts and starts with an introduction in AC-DC conversion principles in general. It will present the most common circuits used for different power levels. The switching mode power supply (SMPS) converter will be the main focus as they are used everywhere in the electronics. Especially the flyback converter design in different flavors are highlighted. Nevertheless, all measurements are also applicable for other SMPS converter designs operating at higher power levels.In the second part of this document, most relevant testing methods and procedures of an AC-DC converter are highlighted. For each testing section, a fundamental part will be upfront discussed and it is followed by a presentation of a suitable measurement method. In this second part, the device under test (DUT) is considered as black box device and thus the structure is similar. Therefore, the testing parts consists of methods related to input tests, output tests and a combination of both like efficiency. Of course, some test performed at the output of the converter are also relevant for DC-DC converter, e.g. the validation of the output ripple.
14-Nov-2022 | AN-No. 1SL387
This paper describes the characterization of aluminum electrolytic capacitors specifically used in AC-DC power converter applications. It will be discussed why this capacitor technology is critical regarding lifetime and why it cannot be substituted simply by any another capacitor technology. Different aging effects of the capacitor will be discussed. Usage of the capacitor in different AC-DC converter topologies will be presented. Simulation circuits will be used to analyze the capacitor in more detail before suitable measurements will be performed to demonstrate a real example of a switching-mode power supply (SMPS).After the introduction into the aluminum electrolytic capacitor basics and theory, this paper will also present all important and possible measurements of capacitor parameters, like capacitance, equivalent series resistance (ESR) and ripple current. This includes in-circuit measurement which can be performed with an oscilloscope. An LCR-bridge is used to obtain high accuracy measurements in addition. A comparison between the two measurement methods will be presented. Furthermore, the required measurement hardware for the in-circuit measurements and the bridge measurement will be discussed and presented.Lastly, two different lifetime calculation methods are presented and a real example is used to compare the advantages and disadvantages of the different methods.Thanks to Mr. Frank Puhane from Würth eiSos GmbH & Co. KG who provided me with all aluminum electrolytic capacitor samples including the prepared capacitor with build-in temperature sensors to perform all measurements. Furthermore, his great expertise was very beneficial and helpful to create this premium application note.
07-Feb-2023 | AN-No. 1SL388
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
The need for Internet of Things (IoT) solutions can arise fast. In most cases, wireless communications modules are added to an embedded design. When designing and debugging IoT systems, many different measurements need to be performed.
03-Nov-2016
The R&S®RTO oscilloscope is a valuable tool for analyzing EMI problems in electronic designs.
27-Jun-2018
The R&S®RTO oscilloscope is the perfect solution for measurement applications that require further remote processing.
15-Feb-2018
Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.
27-Apr-2023
In order to clearly visualize and make repeatable measurements on signals with amplitudes of less than 1/100 of a division, and stabilize signals captured over very long periods, the R&S RTO oscilloscope’s powerful combination of measurement and math channel capabilities allows corrective offset adjustments on individual acquisitions more than one hundred times per second.
10-Sep-2015
Measuring the power supply noise rejection (PSNR) requires accurate generation and leveling of artificial, sinusoidal disturbances and measurement of resulting phase-noise and jitter impairments.
30-Sep-2020
R&S®Forum for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
The numerous supply voltages of FPGAs, CPUs and DSPs need to be powered-up in a specific order to ensure reliable operation.
08-Oct-2018
Automated measurement functions in combination with track functionality make it easier to analyze single events and reveal “long-term” variations.
29-Nov-2018
Measuring RDS(on) with high-definition oscilloscopes - Application Brochure
19-Mar-2015
Rohde & Schwarz offers a compliance test solution using the R&S®RTE or the R&S®RTO oscilloscope.
27-Jan-2016
This document describes the use of the R&S®RTO and R&S®RTP to demodulate RF pulses for further measurements and precisely trigger on and analyze RF pulses.
13-Mar-2019