The optional internal fading simulator provides up to 40 fading paths for simulating multipath propagation.The R&S®SMU200A can be fitted with a wide range of options – for example, options for all of today's important digital standards as well as function and performance enhancements such as MIMO fading or phase coherence.

Polar modulation is a method where digital modulation is realized as a combination of phase and amplitude modulation, rather than using an I/Q modulator. This technique becomes increasingly important in mobile communication. This application note shows how to generate polar modulation with an R&S®SMU200A Vector Signal Generator.

26-Nov-2004 | AN-No. 1GP58

For further information please refer to "www.rohde-schwarz.com/royalty-free-products".35 MBV 4.0 13.12.2018 R&S®SMx RF and Baseband Correction Toolkit Software for equalizing I/Q imbalance and RF frequency response of generator setups consiting of a R&S®AFQ100A / R&S®AFQ100B and a R&S®SMU200A / R&S®SMJ100A / R&S®SMATE100A / R&S®SMBV100A / R&S®SGS100A.

msdownload/update/software/secu/2019/05/windows6.1-kb4499175-x64_3704acfff45ddf163d8049683d5a3b75e49b58cb.msu 2 Check Applicable Instruments 2.1 Instruments, where the patch has been tested and released The following table shows an overview of applicable instruments: Device Windows XP (Embedded) SP3 Windows Embedded 7 32-bit Windows Embedded 7 64-bit SFE, SFC X BTC X UPV, UPP X X AFQ100A, AFQ100B X SMU200A

English (PD 0758.0197.22)

Rohde & Schwarz offers different analog and digital signal generators: from RF vector signal generators, baseband signal generators, microwave signal generators.

LabWindows/CVI, VXIpnp driver history for the R&S® Vector Signal Generators Products: | R&SSMW200A | R&SSMBV100A | R&SSMM100A | R&SSMU200A | R&SSMBV100B Driver history for LabWindows/CVI and VXIplug&play Instrument Driver for C/C++, VEE, etc.

Describes all instrument functions and remote control commands of the base unit, including measurement and programming examples. Also describes some general functions that apply to several applications.Includes the contents of the Quick Start Guide manual.The online version contains the documentation for the R&S®SMU200A base unit and all options for immediate display (no download required).

English (PD 0758.0197.12)

Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.

Provides information on security issues when working with R&S®SMU200A in secure areas.

This application note describes how to convert GPS routes from NMEA 0183 file format to waypoint files that can be used by the R&S®SMU200A Vector Signal Generator.

26-Sep-2008 | AN-No. 1MA133

This application note describes how to verify and validate a LTE (FDD) RF chipset using R&S® SMU200A vector signal generator, R&S® FSQ signal analyzer and R&S® EX-IQ Box. The related signal generation as well as signal analysis is described

19-Dec-2008 | AN-No. 1MA138

This application note describes how to set up 3GPP FDD and LTE multicell and multi-UE scenarios with the R&S®SMU200A with a focus on routing and leveling of the baseband signals. Furthermore, it describes in detail how to determine the correct AWGN settings, i.e. how to calculate the required signal-to-noise ratio for the various scenarios.

10-Aug-2011 | AN-No. 1GP80

This Application Note describes measurements compliant with the CDMA2000® base station standard described in 3GPP2 C.S0010-C v2.0 / TIA/EIA-97-F-1. The primary focus is on solutions for generating and analyzing CDMA2000® signals. The special characteristics that make the selected signal generators and signal analyzers highly suitable for this purpose are detailed, and remote control programming is demonstrated by means of a free-of-charge program.

15-Sep-2009 | AN-No. 1MA109

This application note describes how to use the Rohde & Schwarz software tool ‘RsBatchConvert.exe’ for the conversion of binary data or WinIQSIM generated AMIQ waveforms into the new waveform format. The tool not only rescales I/Q data contained in the file but also changes the K-option requirement from WinIQSIM Kxx to the new WinIQSIM2 K2xx options. Thus, new instruments with installed K2xx options may be used to continue using existing waveform files.

18-Jun-2009 | AN-No. 1GP64

How to Connect the Control Cable from the FSP-B10 (ext. Generator Control) to the SMU200A?

This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.

15-Sep-2012 | AN-No. 1MA206

This Application Note presents means to integrate R&S Test and Measurement instruments into the Agilent® ADS® Design System. Methods to include R&S Instruments are presented, accompanied by a free-of-charge software solution which is provided with this application note. It makes it very easy to include R&S Instruments into your ADS environment and your design flow. Versions for both WINDOWS XP® and LINUX® operating systems are available.

04-Aug-2012 | AN-No. 1MA72

Describes the specific functions of the application. Information required to install and prepare the software for use and start working, as well as the remote connection to Rohde&Schwarz instruments are described.The application is supported by the following products:R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A, R&S®AMU200A and the I/Q modulation generators R&S®AFQ100A and R&S®AFQ100B.For information on operating the product see the corresponding user manual.

Describes the specific functions of the software.The application is supported by the following products:R&S®SMU200A and R&S®SMATE200A.For information on operating the product see the corresponding user manual.

Describe how to configure a signal generator from Rohde&Schwarz to generate test signals for basic tests on Dual Cell HSDPA (DC-HSDPA) operation.The uplink application is supported by the following products, R&S®SMBV100A, R&S®SMU200A, R&S®SMATE200A, R&S®SMJ100A R&S®AMU200A, and R&S®WinIQSIM2TM. The downlink application sheet refers to .R&S®SMU200A.

Describes the specific functions of the software, including the remote control commands with programming examples.The application is supported by the following products:R&S®SMW200A, R&S®SMBV100A, R&S®SGT100A, R&S®SMU200A, and R&S®SMJ100A.For information on operating the product see the corresponding user manual.

IQWizard is a tool for loading IQ signal files in various formats and measuring IQ signals with a FSx spectrum analyzer or ESx Receiver. The obtained IQ data in memory can be stored in various formats or be transmitted to an R&S® vector signal generator with WinIQSIM™ or WinIQSIM2™.

26-Apr-2013 | AN-No. 1MA028

3GPP Release 9 Technical Specification (TS) 37.141 covers multistandard radio base station conformance testing. Multistandard radio includes four standards of mobile communications: GSM, WCDMA, TD-SCDMA, and LTE. This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.

06-Jul-2012 | AN-No. 1MA198

3GPP TS25.141 defines conformance tests for W-CDMA base stations (including HSPA+ features). This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz. One test additionally requires a spectrum analyzer from Rohde & Schwarz.Example illustrates manual operation. A free software program enables and demonstrates remote operation. The W-CDMA base station transmitter (Tx) tests (TS25.141 Chapter 6) are described in Application Note 1MA67.

21-Oct-2014 | AN-No. 1MA114

This application note describes how to create and generate standard-conform IEEE 802.15.4 test signals with the Rohde & Schwarz Vector Signal Generators (VSG).

08-Jan-2016 | AN-No. 1GP105

Multiple antenna systems, known as MIMO systems, form an essential part of today’s wireless communications standards. This multi-antenna technology efficiently boosts the data throughput without requiring additional bandwidth, and has thus become a key technology. Rohde & Schwarz offers high-performance MIMO test solutions which provide static conditions without fading as well as simulation of complex fading scenarios.This application note explains how to set up 4x4 and 8x8 MIMO systems using the R&S®SMBV100A signal generator for measurements under static conditions without fading.For simulation of complex fading scenarios please refer to application note 1GP97.

10-Mar-2010 | AN-No. 1GP50

Application Note 1MA68 has been replaced by .

10-Dec-2008 | AN-No. 1MA68

IEEE 802.15.4 (ZigBee™) uses OQPSK with a half-sine pulse shaping filter as modulation. This application note describes how to generate and analyze ZigBee™ signals. Simple test signals can be setup with the free-of-charge simulation software R&S WinIQSIM™ and transferred to the vector signal generator R&S SMU200A. It describes how to setup the vector signal analyzer R&S FSQ with option R&S FSQ-K70 for ZigBee™ signal demodulation and how to analyze modulation quality such as error vector magnitude (EVM).

21-Jun-2007 | AN-No. RSI03