R&S®NRPxxT/TN/TWG Thermal Power Sensors

Highest measurement accuracy

R&S®NRP67T/TN thermal power sensors
Abrir o Lightbox
R&S®NRP110T thermal power sensor
Abrir o Lightbox
R&S®NRPxxTWG thermal power sensors
Abrir o Lightbox
R&S®NRP67T/TN thermal power sensors
Abrir o Lightbox
R&S®NRP110T thermal power sensor
Abrir o Lightbox
R&S®NRP67TN thermal power sensor
Abrir o Lightbox
R&S®NRP67TN thermal power sensor
Abrir o Lightbox
R&S®NRP67T/TN thermal power sensors R&S®NRP110T thermal power sensor R&S®NRPxxTWG thermal power sensors R&S®NRP67T/TN thermal power sensors R&S®NRP110T thermal power sensor R&S®NRP67TN thermal power sensor R&S®NRP67TN thermal power sensor

Key facts

  • Dynamic range: –35 dBm to +20 dBm
  • Frequency range: DC to 110 GHz
  • Control and monitoring via USB and LAN (R&S®NRPxxTN only)
  • Outstanding performance for reference applications
  • Excellent impedance matching
  • R&S signal & spectrum analyzer | 3 years warranty extension

Most accurate power measurements for reference applications and use in calibration labs

The R&S®NRP power meter sensors have long been recognized for delivering supreme precision and speed. The R&S®NRPxxT, R&S®NRPxxTN and R&S®NRPxxTWG thermal power sensors are especially used for complex measurement tasks where highest accuracy counts. They unifiy excellent impedance matching with sophisticated connector concept. The internal calibration test grants reliable and stable measurements. The R&S®NRP power meter sensors are available as USB sensors and can be additionally controlled via LAN. This makes the R&S®NRP power meter portfolio

Features & benefits

Outstanding performance for reference applications

Unparalleled linearity ideal for performing relative measurements

Thermal power sensors are especially used for complex measurement tasks where highest accuracy counts. To improve measurement accuracy, the hardware of the R&S®NRPxxT(N)/TWG thermal power sensors is designed to reduce measurement noise to a minimum and to make the sensor immune to thermal environmental effects. Three times faster than comparable solutions on the market with triggered measurements and > 500 measurements/s in buffered mode.

NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

High precision measurements R&S®NRP67T

Excellent impedance matching

From N to WR-10, always the right RF interface

To a large extent, measurement uncertainty results from multiple reflections at the source and power sensor caused by mismatch. To minimize these reflections, all thermal power sensors in the R&S®NRP family are excellently matched up to high frequencies, reducing measurement uncertainty.

NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

R&S®NRPxxTWG power sensors

Intelligent, LAN enabled power measurements

Remote monitoring via LAN over any distance

The LAN power sensors are ideal for remote monitoring applications, e.g. for satellite systems or particle accelerators, where sensors need to be placed at different points in the system. The LAN interface makes it easy to overcome large distances between the various test points and the control center.

NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

Remote monitoring of LAN power sensors

Internal calibration test

Rohde & Schwarz has implemented a special verification function in the R&S®NRPxxT(N) sensors. This function covers all essential components of the signal path. Using a test routine, the sensor’s response to a highly stable applied DC power is measured and compared against the value stored during the previous calibration. The result provides information about the functionality and accuracy of the power sensor.

NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

Test setup with R&S®NRP power sensors

Advantage of a portfolio

Common R&S®NRP power sensor features

  • Minimizing measurement uncertainty with fully characterized power sensors
  • Intelligent averaging function minimizes measurement time
  • USBTMC for easy system integration
  • Built-in trigger I/O port
  • Sensor status at a glance with status LED
NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

Features also available as three-path diode power sensors

Flexible interfacing

Robust 6-/8-pole, USB or LAN

The power sensors come with various, detachable cables. A screw connection is provided on the sensor end to prevent accidental loosening of the cable. Direct connection to diverse Rohde & Schwarz signal generators and signal and spectrum analyzers enhances these instruments with a highperformance power meter. The R&S®NRP-ZKU USB interface cable can be used to connect a power sensor to a laptop/PC via the USB interface.

NRPxxT/TN/TWG Thermal power sensor
Open Lightbox

R&S®NRP67TN and R&S®NRP67T thermal power sensors

Available models

Available models

  • Model name

    R&S®NRP18T

    Order number 1424.6115.02

    Frequency range
    DC to 18 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    N(m)
  • Model name

    R&S®NRP18TN

    Order number 1424.6121.02

    Frequency range
    DC to 18 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    yes
    Connector type
    N(m)
  • Model name

    R&S®NRP33T

    Order number 1424.6138.02

    Frequency range
    DC to 33 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    3.5 mm (m)
  • Model name

    R&S®NRP33TN

    Order number 1424.6144.02

    Frequency range
    DC to 33 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    yes
    Connector type
    3.5 mm (m)
  • Model name

    R&S®NRP40T

    Order number 1424.6150.02

    Frequency range
    DC to 40 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    2.92 mm (m)
  • Model name

    R&S®NRP40TN

    Order number 1424.6167.02

    Frequency range
    DC to 40 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    yes
    Connector type
    2.92 mm (m)
  • Model name

    R&S®NRP50T

    Order number 1424.6173.02

    Frequency range
    DC to 50 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    2.4 mm (m)
  • Model name

    R&S®NRP50TN

    Order number 1424.6180.02

    Frequency range
    DC to 50 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    yes
    Connector type
    2.4 mm (m)
  • Model name

    R&S®NRP67T

    Order number 1424.6196.02

    Frequency range
    DC to 67 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    1.85 mm (m)
  • Model name

    R&S®NRP67TN

    Order number 1424.6209.02

    Frequency range
    DC to 67 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    yes
    Connector type
    1.85 mm (m)
  • Model name

    R&S®NRP110T

    Order number 1424.6215.02

    Frequency range
    DC to 110 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    1 mm (m)
  • Model name

    R&S®NRP75TWG

    Order number 1700.2529.02

    Frequency range
    50 GHz to 75 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    WR-15
  • Model name

    R&S®NRP90TWG

    Order number 1700.2312.02

    Frequency range
    60 GHz to 90 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    WR-12
  • Model name

    R&S®NRP110TWG

    Order number 1173.8709.02

    Frequency range
    75 GHz to 110 GHz
    Level range
    -30 dBm to +20 dBm
    LAN interface
    no
    Connector type
    WR-10

Available options

Interface cables
Product Description
NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.02

Description

USB interface cable, length: 0.75 m

NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.03

Description

USB interface cable, length: 1.5 m

NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.04

Description

USB interface cable, length: 3 m

NRP-ZKU USB interface cable

R&S®NRP-ZKU

Order number 1419.0658.05

Description

USB interface cable, length: 5 m

R&S®NRP-ZK6

Order number 1419.0664.02

Description

6-pole interface cable, length: 1.5 m

R&S®NRP-ZK6

Order number 1419.0664.03

Description

6-pole interface cable, length: 3 m

R&S®NRP-ZK6

Order number 1419.0664.04

Description

6-pole interface cable, length: 5 m

R&S®NRP-ZK8

Order number 1424.9408.02

Description

8-pole interface cable, length: 1.50 m

R&S®NRP-ZK8

Order number 1424.9408.03

Description

8-pole interface cable, length: 3.00 m

R&S®NRP-ZK8

Order number 1424.9408.04

Description

8-pole interface cable, length: 5.00 m

Interface accessories
Product Description
NRP-Z5_Sensor_Hub_front.jpg

R&S®NRP-Z5

Order number 1146.7740.02

Description

USB sensor hub

R&S®NRP-Z5 can host up to 4 R&S®NRPxxS(N), R&S®NRPxxT(N), R&S®NRPxxA(N) or R&S®NRP-Z sensors. A professional trigger solution allows simultaneous internal and external triggering of all connected sensors.

R&S®NRP-ZAP1

Order number 1419.0829.00

Description

Power-over-Ethernet (PoE+) Switch

Waveguide accessories
Product Description

R&S®ZCTW

Order number 1175.2014.02

Description

Angled Torque Wrench for waveguide flange screws

R&S®NRP-ZBW

Order number 1700.2141.02

Description

Waveguide bracket for R&S®NRP110T

R&S®WCA75

Order number 3626.1044.02

Description

WR-15 to 1 mm (f) adapter for R&S NRP110T

R&S®WCA90

Order number 3626.1050.02

Description

WR-12 to 1 mm (f) adapter for R&S NRP110T

R&S®WCA110

Order number 3626.1067.02

Description

WR-10 to 1 mm (f) adapter for R&S NRP110T

Documentation
Product Description

R&S®DCV-1

Order number 0240.2187.06

Description

Documentation of calibration values

R&S®DCV-ZP

Order number 1173.6506.02

Description

Printout of DCV

R&S®NRP-ACA

Order number 1419.0812.00

Description

Accredited calibration for R&S®NRX-B1, R&S®NRPxxS(N), R&S®NRPxxA(N), R&S®NRPxxT(N) and R&S®NRPxxTWG

Peça informações

Falta alguma pergunta? Você precisa de informações adicionais? Basta usar este formulário e nós imediatamente voltaremos para você.

Licença de marketing

Quero receber informações da Rohde & Schwarz por

O que isso significa?

Concordo que a ROHDE & SCHWARZ GmbH & Co. KG e a entidade ou subsidiária ROHDE & SCHWARZ que figuram na Informação Legal deste site podem entrar em contato comigo por meio do canal escolhido (e-mail ou correio) para fins de marketing e publicidade (por exemplo, informações sobre ofertas especiais e promoções de descontos) relacionados, mas não limitados, a produtos e soluções para teste e medição, comunicações seguras, monitoramento e testes de redes, broadcast e mídia, e segurança cibernética.

Seus direitos

Esta declaração de consentimento pode ser retirada a qualquer momento, enviando um e-mail com o assunto "Cancelar subscrição" para news@rohde-schwarz.com. Além disso, cada e-mail enviado tem um link para cancelar a subscrição de futuros anúncios por e-mail. Mais detalhes sobre a utilização de dados pessoais e o procedimento de rescisão estão definidos na “Declaração de privacidade”.

Obrigado.

Sua equipe Rohde & Schwarz

Ocorreu um erro. Tente novamente mais tarde.
Informações gerais e legais