1000BASE-T1 Ethernet software

Compliance test

1000BASE-T1 Ethernet software
Abrir o Lightbox
1000BASE-T1 Ethernet software, Software

Key Facts

  • Test solution of 1000BASE-T1 Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Meets IEEE 802.3bp specification
  • Complete test solution including fixture and clock divider
  • Multi-domain icon
  • HD 16 bit

Oscilloscope software

The R&S®RTO-K87 and R&S®RTP-K87 options offer automated test solutions for 1000BASE-T1 in line with the IIEEE 802.3bp specification. The test wizard guides the user via illustrated step-by-step instructions. The complete test solution includes fixture and clock divider. The R&S®Scope Suite runs on scope or separate PC.

Features & benefits

Includes all relevant tests

The complete test solution covers all relevant test cases of the IEEE 802.3bp specification for the1000BASE-T1. A test fixture is available for signal access via a differential probe for accurate signals.

Abrir o Lightbox

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The
limit editor lets you individually adjust standard-specific test limits.

Abrir o Lightbox

Ease-of-use with guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and device under test. This increases the ease-of-use and reduces potential setup errors.

Strong reporting function

The test results are fully documented in a report created by the R&S®ScopeSuite. The test report can include numerical result data or oscilloscope screen shots depending on user preference. The reports are available in PDF, DOC and HTML formats.

Detailed report including setup parameters, measurement results and screenshots
Abrir o Lightbox

Detailed report including setup parameters, measurement results and screenshots

Test solution includes oscilloscope, VNA, waveform generator and test fixtures

The compliance test setup includes test cases that require a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

Abrir o Lightbox

Available models

Available models
Modelos
Min. bandwidth
Description
Base unit

R&S®RTO-K87

Order Number 1337.8591.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit

R&S®RTP-K87

Order Number 1800.6554.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit

R&S®RTO6-K87

Order Number 1801.6970.02

Min. bandwidth
2 GHz
Description
Automated compliance test solution for 1000BASE-T1 Ethernet according to the IEEE 802.3bp specification
Base unit
Specifications
Recommended configuration R&S®RTO-K87; - RTO2024
- RTO-B6 (for tests with disturber)
- RTO-B4
- RT-ZF8 Ethernet test fixture
- RT-ZF6 frequency converter
- 2 x SMA cables
- ZND or ZNB network analyzer (option K5 or K6 required)
R&S®RTP-K87; - RTP044
- RTP-B6 (for tests with disturber)
- RT-ZF8 Ethernet test fixture
- RT-ZF6 frequency converter
- 2 x SMA cables
- ZND or ZNB network analyzer (option K5 or K6 required)

Available options

Software options
Product
Descrição

Order Number 1329.7419.02

Descrição

High definition mode.

Extras
Product
Descrição
R&S®RT-ZF2

Order Number 1317.5522.02

Descrição

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet

Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

R&S®RT-ZF6

Order Number 1337.8579.02

Descrição

Frequency converter board

for 1000BASE-T1 compliance test

R&S®RT-ZF7A

Order Number 1801.4126.02

Descrição

SMA Adapter

High precision adapter board from automotive connector to SMA

R&S®RT-ZF8

Order Number 1801.3694.02

Descrição

Automotive Ethernet Compliance Fixture

Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8

R&S®RTO-B4

Order Number 1304.8305.02

Descrição

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

Order Number 1329.7054.02

Descrição

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order Number 1328.5312.02

Descrição

Full test set, Base Unit, bidirectional, 4.5GHz

Order Number 1410.4609.02

Descrição

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

Application videos

1000Base-T1 compliance testing

1000Base-T1 compliance testing

Guideline for 1000Base-T1 compliance testing using the R&S®RTO and R&S®ZND.

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 2: MDI jitter and clock frequency

1000BASE-T1 Compliance Testing Test Mode 2

1000BASE-T1 compliance testing

Test mode 5: Transmitter power spectral densityy (PSD), power level and peak differential output

1000BASE-T1 Compliance Testing Test Mode 6: Maximum output droop

1000BASE-T1 compliance testing

Test mode 6: Maximum output droop

1000BASE-T1 Compliance Testing Test Mode 4: Transmitter Distortion Test with Disturber

1000BASE-T1 compliance testing

Test mode 4: Transmitter distortion test with disturber

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.