Key Facts
Broad portfolio of market-leading test and measurement solutions for air traffic control
Rohde & Schwarz provides a range of test, measurement and quality assurance equipment for civil air traffic control under the brand CERTIUM® ANALYSIS. These products ensure regulatory compliance and easy operation and maintenance of an entire system. The portfolio ranges from high-quality frequency and signal analyzers for radio, NaVaid and radar testing. It also includes solutions for automated interference hunting and IP network performance monitoring.
Aligned set of test and measurement systems for navigation, communication and surveillance solutions
Rohde & Schwarz offers a broad portfolio for all applications within the air traffic control solution from communication to navigation and surveillance. Test and measurement solutions include high-quality frequency and signal analyzers, radio measurement and also IP quality assurance systems. These are applicable for installation, maintenance and troubleshooting, supporting everyday operations maintaining full functional system in compliance with legal requirements.
The R&S®CMA180 is the ATC radio testing market standard of both Rohde & Schwarz and other radios
The R&S®CMA180 test set is an all-in-one platform that performs in-depth analysis of air traffic control (ATC) radios, as well as NavAid systems such as ILS, VOR and MB. The integrated signal generator and spectrum and vector analyzer of the R&S®CMA180 allow– among other things – to analyze signal quality, perform power measurements, measure modulation frequency response and carry out squelch sensitivity tests on both the transmitter and receiver side. The battery and antenna of the R&S®CMA180 allow it to also be used as a standalone instrument, which is ideal for aircraft maintenance. These functions may also be automated with the R&S®CMArun software extension and documented in a single report. The R&S®CMA180 features an analog and an ED-137B/C-compatible IP interface. The I/Q recorder allows RF signals to be recorded via the dedicated RF ports.
R&S®CMA180 with R&S®Series5200 radio
VHF and UHF band antenna and cable testing using R&S®Cable Rider ZPH.
RF communications for air traffic control have specific requirements. To address these, Rohde & Schwarz has prepared a special set of measurement tools. The R&S®Cable Rider ZPH, case in point, is aimed at VHF band antenna and cable testing. It provides cable loss and distance-to-fault measurements, antenna and filter matching, power measurements, as well as entry-level interference hunting features. Other handhelds, such as the R&S®FSH or R&S®ZVH complement its already versatile profile.
Antena measurement using R&S®Cable Rider ZPH
Clean the spectrum and identify, locate and eliminate interference using R&S®Spectrum Rider FPH or R&S®PR200
The R&S®Spectrum Rider FPH offers comprehensive spectrum monitoring functions for interference hunting. When combined with a directional antenna, the R&S®Spectrum Rider FPH can pinpoint the source of the signal on a map and listen in to the AM or FM modulated signal. For more advanced interference hunting applications, the R&S®PR200 gives you the edge. It offers real-time continuous spectrum monitoring of the entire ATC voice band at once. Even the shortest bursts can be effectively visualized. At the same time, it can also demodulate the signal on one frequency and play it out to provide acoustic feedback about the magnitude of the interference. Together with a high-precision direction finding antenna, the R&S®PR200 provides a fully automated, dynamic estimation of the interference location during drive tests.
Interference hunting using the R&S®PR200
Radar measuring with the R&S®ZNH handheld vector network analyzer and its numerous addons
Simple setup of R&S®ZNH in combination with R&S®ZNH-K45 vector voltmeter makes it ideal for field use in a number of scenarios involving comparison measurements between two devices, including for calibration of monopulse radar installations. The option’s pulse measurement capability is complemented by the R&S®ZNH-K29 option. This is another modular add-on that allows R&S®ZNH to perform precise pulse and peak measurements in combination with an additional wideband power sensor. This is useful during the installation and maintenance of radar systems, since R&S®ZNH can measure pulses as short as 50 ns.
R&S®ZNH in use
Measurement and calibration of ILS/MB, VOR, GBAS, DME using R&S®EVSF1000 and R&S®EVSG1000
R&S provides a broad portfolio on test and measurement solutions for entire lifecycle of NaVaid systems. R&S®EVSG1000 is optimal tool for field measurements on the ground, while R&S®EVSF1000 allows in-flight inspections Additionally, the portfolio comprises signal generation for receiver tests, e.g. R&S®CMA180 on-board equipment radio test set, R&S®SMBV100B and R&S®SMA100B vector signal generators. R&S®FSH vector voltmeter assists on antenna and cable testing.
Airport measurements using R&S®EVSG1000
Signal level and modulation analyzer for ILS, GBAS, VOR, COM and marker beacon measurements onboard drone inspection systems
A fast and efficient cable and antenna measurements with spectrum analysis capability
Radiocommunications tester
Non-intrusive voice quality assurance system
A portable monitoring receiver that effectively supports spectrum monitoring, interference hunting, spectrum clearance and site testing applications.
Signal level and modulation analyzer for ILS, GBAS, VOR, COM and marker beacon measurements onboard flight inspection planes
Signal level and modulation analyzer for ILS, GBAS, VOR, COM and marker beacon measurements on ground
A lightweight full two-port handheld vector network analyzer with heavyweight performance
Handheld spectrum analyzer, frequency range from 5 kHz up to 44 GHz.
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz
1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).
2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.
3. A participação é gratuita e não depende da compra de mercadorias ou serviços.
4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.
5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:
Prêmio: 1 osciloscópio digital R&S®RTB2000
6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.
7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.
8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.
9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.
10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.
11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.
12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.
13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.
