Time domain analysis with VNA

Time domain analysis with VNA
Abrir o Lightbox
Time domain analysis with VNA, Screenshot

Key Facts

  • Rise time resolution from 9 ps
  • Formats: lowpass impulse and step, bandpass impulse
  • Windowing/time gates: rectangular, hamming, Hann, Bohman, Dolph-Chebychev
  • Signal integrity test function with eye diagram

Time domain and distance-to-fault measurements

The time domain and distance-to-fault options display discontinuities, reflection factors or impedance versus delay/length. The TD option includes step and impulse response, lowpass/bandpass, frequency spacing and gated S-parameters. A wide selection of windows can be used to optimize the time domain response and suppress sidelobes due to the finite sweep range. Time gating and transforming back to the frequency domain eliminates unwanted responses.

Features & benefits

Supported formats

The right format for the right application

The Rohde & Schwarz time domain option supports the following formats: lowpass impulse and step, bandpass impulse. The easy-to-use bandpass mode works with any set of a harmonic grid. The lowpass mode offers higher resolution factors in the DC value information.

Abrir o Lightbox

Windowing/time gating

Optimize measurement results with windowing and gating

The finite sweep range in frequency domain measurements with discontinuous transitions at the start and stop frequency broadens the impulses and causes sidelobes (ringing) in the time domain response. Windowing can reduce this effect and optimize the time domain response. A time gate is used to eliminate unwanted responses that appear on the time domain transform. An active time gate acts on the trace in time domain and frequency domain representations.

Abrir o Lightbox

Signal integrity

Valuable insights into the signal integrity of your design

The enhanced time domain option enables the R&S®VNA to implement a "virtual" signal generator for generating multilevel PAM signals (NRZ, PAM-4, PAM-8, PAM-16), including simulated lowpass behavior. The eye diagram calculated from the DUT's measured S-parameters provides an extensive overview of the system's signal integrity. Further building blocks for pre-emphasis, jitter, noise and equalization enable synthesization of the transmission system's transmitter and receiver parts.

Abrir o Lightbox

Time domain resolution

Optimum resolution for optimum results

The Rohde & Schwarz time domain options offer a minimum resolution of up to 18 ps with an ambiguity range of up to 1.5 µs depending on the instrument of choice. Rise time resolution is as narrow as 9 ps. For more information, see the comparison table.

Available models

Available models
Modelos
Supported VNA
Maximum frequency/maximum # of points
Distance to fault
Enhanced time domain w/eye diagram
Maximum resolution [continuous sweep]/rise time
Maximum ambiguity range @ maximum resolution

R&S®ZNA-K2

Order Number 1332.5336.02

Supported VNA
Maximum frequency/maximum # of points
67 GHz / 100,001
Distance to fault
-
Enhanced time domain w/eye diagram
ZNA-K20
Maximum resolution [continuous sweep]/rise time
30 ps / 15 ps
Maximum ambiguity range @ maximum resolution
1.5 µs

R&S®ZVAB-K2

Order Number 1164.1657.02

Supported VNA
Maximum frequency/maximum # of points
110 GHz / 60,001
Distance to fault
-
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
18 ps / 9 ps
Maximum ambiguity range @ maximum resolution
55 µs

R&S®ZNB-K2

Order Number 1316.0156.02

Supported VNA
Maximum frequency/maximum # of points
40 GHz / 100,001
Distance to fault
ZNB-K3
Enhanced time domain w/eye diagram
ZNB-K20
Maximum resolution [continuous sweep]/rise time
50 ps / 25 ps
Maximum ambiguity range @ maximum resolution
2.5 µs

R&S®ZNBT-K2

Order Number 1318.8425.02

Supported VNA
Maximum frequency/maximum # of points
40 GHz/100,001
Distance to fault
R&S®ZNBT-K3
Enhanced time domain w/eye diagram
R&S®ZNBT-K20
Maximum resolution [continuous sweep]/rise time
50 ps/50 ps
Maximum ambiguity range @ maximum resolution
2.5 µs

R&S®ZND-K2

Order Number 1328.5393.02

Supported VNA
Maximum frequency/maximum # of points
8.5 GHz / 5001
Distance to fault
ZND-K3
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
235 ps / 117 ps
Maximum ambiguity range @ maximum resolution
6.25 µs

R&S®ZVL-K3

Order Number 1306.0201.02

Supported VNA
Maximum frequency/maximum # of points
13.6 GHz / 4,001
Distance to fault
ZVL-K2
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
147 ps / 73 ps
Maximum ambiguity range @ maximum resolution
2.94 µs

R&S®ZNL-K2

Order Number 1323.1819.02

Supported VNA
Maximum frequency/maximum # of points
6 GHz / 100,001
Distance to fault
ZNL-K3
Enhanced time domain w/eye diagram
-
Maximum resolution [continuous sweep]/rise time
333 ps / 166 ps
Maximum ambiguity range @ maximum resolution
16.7 µs

Available options

General
Product
Descrição
R&S®ZNA-K20

Order Number 1332.4746.02

Descrição

Extended time domain analysis

incl. eye diagram, for R&S®ZNA

R&S®ZNB-K20

Order Number 1326.8072.02

Descrição

Extended time domain analysis

R&S®ZNBT-K20

Order Number 1319.4400.02

Descrição

Extended time domain analysis with eye diagram

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.