R&S®Fsx-k54 EMI measurement application

R&S®FPL1-K54, R&S®FSV-K54, R&S®FSV3-K54 and R&S®FSW-K54

R&S®Fsx-k54 EMI measurement application
Abrir o Lightbox
R&S®Fsx-k54 EMI measurement application
Abrir o Lightbox
R&S®Fsx-k54 EMI measurement application, Screenshot R&S®Fsx-k54 EMI measurement application, Screenshot

Key Facts

  • EMI measurement bandwidths and detectors
  • Limit line library as specified in the latest EMI standards
  • Test automation and reporting for fast and repeatable measurements
  • Transducer factors for antennas, cables, LISNs, etc
  • Support of Elektra EMC software

Detecting and eliminating electromagnetic interference

The EMI precompliance application (K54 option) for Rohde & Schwarz signal and spectrum analyzers is the ideal extension for EMI analysis during product development and to prepare for a smooth product certification process. Typical fields of application include commercial, automotive, avionic and military product developments (CISPR, EN, FCC, DO-160 and MIL-STD-461 standards).

Features & benefits

Conclusive results

  • Detectors in line with CISPR 16-1-1: peak, quasi-peak, CISPR-average, RMS-average
  • 6 dB bandwidth in line with CISPR 16-1-1: 200 Hz, 9 KHz, 120 kHz and 1 MHz
  • 6 dB bandwidth in line with  MIL-STD-461 and DO-160: 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz and 1 MHz
  • Selection of one or more transducer factors to compensate for e.g. antenna factors or cable attenuation
  • Limit lines: More than 170 EMI limit lines based on the latest versions of common EMI standards

Transducer definition (example from R&S®FPL1000)
Abrir o Lightbox

Transducer definition (example from R&S®FPL1000)

Selection of two transducer factors (line impedance stabilization network and related cabling).

Measurement automation

Repeatable and fast measurement thanks to automated test sequence

  • Pretesting: Sweeping of set frequency range with one or more fast detectors (e.g. peak or average) 
  • Identification of critical frequencies: Automatic detection of peaks and limit deviations as well as tabular overview of frequencies found  
  • Final measurement of identified frequencies: Automatic final measurement using detectors that require a longer measuring time (e.g. quasi-peak) and final evaluation based on the set limit line

Measurement automation (example from R&S®FPL1000)
Abrir o Lightbox

Measurement automation (example from R&S®FPL1000)

Two detectors are used for the sweep. The identified maximum values are listed and automatically remeasured. PASS/FAIL status is clearly shown.

In-depth signal analysis

  • Up to 200 001 sweep points for high frequency resolution even with large span/small measurement bandwidths
  • Logarithmic frequency scale for in-depth analysis of low frequencies despite wide frequency range
  • Zero span measurement for analyzing the signal behavior over time of selected frequencies with standard detectors and CISPR detectors
  • AM and FM demodulation with audio output to identify ambient interferers

Zero span measurement (example from R&S®FPL1000)
Abrir o Lightbox

Zero span measurement (example from R&S®FPL1000)

The signal is analyzed over time at 580 kHz. The repetition rate of the interference is 50 Hz (20 ms).

Efficient and fast

  • Limit lines: More than 170 EMI limit lines based on the latest versions of common EMI standards (CISPR/EN, FCC, MIL-STD-461 and DO-160) for fast and accurate configuration of the measurement setup
  • LISN remote control: Simplified test execution by controlling connected Rohde & Schwarz LISNs.
  • Report generation: Output of measurement results  at the push of a button

Limit line selection (example from R&S®FPL1000)
Abrir o Lightbox

Limit line selection (example from R&S®FPL1000)

Limit line selection for electric tools up to 700 W and definition of visibility and trace assignment.

R&S®ELEKTRA EMC test software support

The R&S®ELEKTRA test software controls entire EMC systems and automates measurements of equipment under test (EUT). R&S®ELEKTRA simplifies configuration of test systems and test descriptions in line with common standards. It speeds up test execution and paves the way to quickly generating a comprehensive test report.

Automated EMI measurement with R&S®ELEMI-E
Abrir o Lightbox

Automated EMI measurement with R&S®ELEMI-E

The R&S®ELEMI-E EMI test software, a simplified version of the R&S®ELEKTRA software, is ideal for EMI measurements during development.

Vídeos de aplicação

Análise de pré-conformidade de EMI realizada com um analisador de espectro R&S®FPL1000

Como investigar as emissões conduzidas de uma lâmpada de 230 V com o aplicativo de medição de EMI. A configuração inclui o analisador de espectro R&S®FPL1000 equipado com a opção R&S®FPL1-K54 e o R&S®ENV216.

ago. 15, 2021

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Licença de marketing

O seu pedido foi submetido. Iremos contactá-lo em breve.
An error is occurred, please try it again later.
Informações gerais e legais

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termos e condições do sorteio de prêmios: 10 anos dos osciloscópios da Rohde & Schwarz

1. O sorteio de prêmios “10 anos dos osciloscópios da Rohde & Schwarz” (no presente, referido como “Sorteio”) é organizado pela Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munique, Alemanha, tel. +49 89 41 29 0 (doravante referida como “R&S”).

2. Todos os participantes podem se inscrever durante o período de 1º de janeiro de 2020 a 31 de dezembro de 2020, informando seu nome, nome da empresa e e-mail comercial.

3. A participação é gratuita e não depende da compra de mercadorias ou serviços.

4. O sorteio está aberto somente a pessoas jurídicas e apenas às pessoas jurídicas que possam ganhar os prêmios. Pessoas físicas não poderão participar em nome e interesse próprios, mas como representantes de uma pessoa jurídica, devendo preencher a ficha de participação em nome e segundo o interesse da pessoa jurídica.

5. Os prêmios a serem entregues são 1 de 10 R&S®RTB2000, no período de 1º de janeiro de 2020 a 31 de dezembro de 2020:

Prêmio: 1 osciloscópio digital R&S®RTB2000

6. O sorteio ocorrerá na sede da R&S, em Munique, à Muehldorstrasse 15, 81671. O ganhador dos prêmios será avisado por e-mail no prazo de cinco (5) dias úteis.

7. O representante autorizado da pessoa jurídica informará à R&S sobre a aceitação do preço. Caso a aceitação seja negada ou se não houver resposta em até duas (2) semanas, um novo ganhador será sorteado. Se não for possível definir um ganhador no prazo de quatro (4) semanas, o sorteio se encerrará e o prêmio prescreverá.

8. Aos funcionários da R&S e seus familiares, bem como às pessoas familiarizadas com o processo do sorteio e seus familiares, é vetado o preenchimento da ficha de participação.

9. Não são permitidos equivalente em dinheiro ou troca de prêmios. Os prêmios são intransferíveis. Todos os impostos, tributos, encargos, taxas e outras cobranças tributáveis no país do participante serão arcadas pelo participante.

10. Dados pessoais somente serão processados para os fins deste sorteio e excluídos quatro (4) semanas após o sorteio, se não acordado de outro modo.

11. O participante que não cumprir os presentes Termos e Condições estará sujeito à desclassificação pela R&S da participação neste concurso. Neste caso, os prêmios também poderão ser retirados retroativamente. Se um prêmio estiver sujeito à retirada retrospectiva por motivo de incumprimento dos presentes Termos e Condições, ele deverá ser devolvido pelo respectivo participante, às suas expensas, para o endereço da R&S mencionado na disposição N.1, e um novo ganhador será sorteado.

12. Os participantes não podem reivindicar os prêmios do sorteio e não são autorizados recursos legais neste sentido.

13. O sorteio e a relação contratual decorrente, entre a R&S e o respectivo participante, serão regidos e interpretados de acordo com as leis da Alemanha, sem dar efeito ao princípio do conflito de leis. Os tribunais de Munique, Alemanha, gozarão de jurisdição exclusiva em caso de disputa decorrente, direta ou indiretamente, da participação neste concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.