Téléchargements

R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications.

English - 26 mai 2020

The R&S SMW200A vector signal generator can simultaneously generate up to eight independent signals from a single instrument to support even complex applications like MSR, carrier aggregation, MIMO or enhanced interference scenarios. This application note gives an overview of common multi-channel application examples and how to equip the R&S SMW200A appropriately.

English - 12 mars 2018

This application note shows developers and manufacturers of devices with LoRa wireless technology how transmitter measurements are conducted in line with FCC Part 15.247.

English - 29 nov. 2017

This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.

English - 19 juin 2017

This white paper introduces measures to minimize malware threats and discusses ways to reduce risks while insuring that instrument performance is not compromised. The paper also discusses the use of anti-virus software in combination with Embedded Linux based instruments.

English - 23 nov. 2016

This application note explains how to generate phase coherent signals with a compact easy-to-use solution.

English - 7 sept. 2016

High-Speed Remote Control

English - 12 mai 2016

The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.

English - 8 mars 2016

This application note explains how to use the SMW for testing higher order MIMO systems by presenting different key applications.

English - 24 févr. 2016

This application note explains how to connect and interface with the SGMA instruments and gives some recommendations and hints about their use.

English - 15 oct. 2015

The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.

English - 4 mai 2015

This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.

English - 12 nov. 2014

This application note demonstrates Rohde & Schwarz test solutions for generating WLAN 802.11ac signals and explains step-by-step how to configure a test signal. Several measurements are presented to illustrate EVM performance.

English - 26 avr. 2013

Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting

English - 20 déc. 2012