Key facts
- Frequency range: 9 kHz to 8.5 GHz or 100 kHz to 20/26.5/40 GHz
- Up to 24 ports with fully phase coherent receivers
- Dynamic range of up to 140 dB
- Short sweep times of 2.5 ms (R&S®ZNBT8) for a sweep across 201 points
Key facts
A true multiport vector network analyzer
The R&S®ZNBT is a multiport vector network analyzer with up to 24 fully integrated test ports. The instrument can simultaneously test multiple DUTs or measure one DUT with up to 24 ports. The fully integrated test ports make the R&S®ZNBT a true multiport vector network analyzer, which includes a wide dynamic range, high output power levels and fast measurements. Frequency ranges up to 40 GHz are available.
Quick links
Platform for challenging multiport measurements
The R&S®ZNBT features one reflectometer per test port. The design eliminates the loss typically encountered in switch matrix based multiport systems. As a result, the R&S®ZNBT delivers a wide dynamic range, high output power, low trace noise, and excellent raw directivity and load match.
Short test times and various control interfaces
The instrument’s multiport architecture enables simultaneous measurements on all DUT ports. Data from all ports is captured synchronously and processed in parallel, significantly reducing sweep time compared to switch matrix based multiport systems. Digital interfaces help boost the speed of automatic test cycles to synchronize external components in a test setup. The handler I/O interface can be used to control an external parts handler.
Complex analysis of active and passive components
Enhanced performance modules with ever smaller dimensions require complex testing. The R&S®ZNBT has a wide variety options and features:
Various calibration methods and devices
The R&S®ZNBT offers calibration methods for every application, including TOSM, TSM, TRL/LRL, UOSM and more. Together with a huge variety of calibration accessories ranging from manual calibration kits to automatic calibration units with up to 24 ports, all user calibration needs can be met.
Order number 1319.4317.02
Receiver step attenuators for ports 1 to 4 for the R&S®ZNBT8
Order number 1319.4323.02
Receiver step attenuators for ports 5 to 8 for the R&S®ZNBT8
Order number 1319.4330.02
Receiver step attenuators for ports 9 to 12 for the R&S®ZNBT8
Order number 1319.4346.02
Receiver step attenuators for ports 13 to 16 for the R&S®ZNBT8
Order number 1319.4352.02
Receiver step attenuators for ports 17 to 20 for the R&S®ZNBT8
Order number 1319.4369.02
Receiver step attenuators for ports 21 to 24 for the R&S®ZNBT8
Order number 1319.4252.02
Extended power range for ports 1 to 4 for the R&S®ZNBT8
Order number 1319.4269.02
Extended power range for ports 5 to 8 for the R&S®ZNBT8
Order number 1319.4275.02
Extended power range for ports 9 to 12 for the R&S®ZNBT8
Order number 1319.4281.02
Extended power range for ports 13 to 16 for the R&S®ZNBT8
Order number 1319.4298.02
Extended power range for ports 17 to 20 for the R&S®ZNBT8
Order number 1319.4300.02
Extended power range for ports 21 to 24 for the R&S®ZNBT8
Order number 1332.9348.02
Extended power range for ports 1 to 4 for the R&S®ZNBT20
Order number 1332.9354.02
Extended power range for ports 5 to 8 for the R&S®ZNBT20
Order number 1332.9360.02
Extended power range for ports 9 to 12 for the R&S®ZNBT20
Order number 1332.9377.02
Extended power range for ports 13 to 16 for the R&S®ZNBT20
Order number 1332.9383.02
Extended power range for ports 17 to 20 for the R&S®ZNBT20
Order number 1332.9390.02
Extended power range for ports 21 to 24 for the R&S®ZNBT20
Order number 1332.9348.34
Extended power range for ports 1 to 4 for the R&S®ZNBT26
Order number 1332.9354.34
Extended power range for ports 5 to 8 for the R&S®ZNBT26
Order number 1332.9360.34
Extended power range for ports 9 to 12 for the R&S®ZNBT26
Order number 1332.9377.34
Extended power range for ports 13 to 16 for the R&S®ZNBT26
Order number 1332.9383.34
Extended power range for ports 17 to 20 for the R&S®ZNBT26
Order number 1332.9390.34
Extended power range for ports 21 to 24 for the R&S®ZNBT26
Order number 1332.9348.44
Extended power range for ports 1 to 4 for the R&S®ZNBT40
Order number 1332.9354.44
Extended power range for ports 5 to 8 for the R&S®ZNBT40
Order number 1332.9360.44
Extended power range for ports 9 to 12 for the R&S®ZNBT40
Order number 1332.9377.44
Extended power range for ports 13 to 16 for the R&S®ZNBT40
Order number 1332.9383.44
Extended power range for ports 17 to 20 for the R&S®ZNBT40
Order number 1332.9390.44
Extended power range for ports 21 to 24 for the R&S®ZNBT40
Order number 1332.8335.02
Extended dynamic range for ports 1 to 4 for the R&S®ZNBT8
Order number 1332.8341.02
Extended dynamic range for ports 5 to 8 for the R&S®ZNBT8
Order number 1332.8358.02
Extended dynamic range for ports 9 to 12 for the R&S®ZNBT8
Order number 1332.8364.02
Extended dynamic range for ports 13 to 16 for the R&S®ZNBT8
Order number 1332.8370.02
Extended dynamic range for ports 17 to 20 for the R&S®ZNBT8
Order number 1332.8387.02
Extended dynamic range for ports 21 to 24 for the R&S®ZNBT8
Order number 1319.4200.02
Additional ports 5 to 8 for the R&S®ZNBT8
Order number 1319.4217.02
Additional ports 9 to 12 for the R&S®ZNBT8
Order number 1319.4223.02
Additional ports 13 to 16 for the R&S®ZNBT8
Order number 1319.4230.02
Additional ports 17 to 20 for the R&S®ZNBT8
Order number 1319.4246.02
Additional ports 21 to 24 for the R&S®ZNBT8
Order number 1338.2116.02
Additional ports 9 to 12 for the R&S®ZNBT20
Order number 1338.2122.02
Additional ports 13 to 16 for the R&S®ZNBT20
Order number 1338.2139.02
Additional ports 17 to 20 for the R&S®ZNBT20
Order number 1338.2145.02
Additional ports 21 to 24 for the R&S®ZNBT20
Order number 1332.9454.34
Additional ports 9 to 12 for the R&S®ZNBT26
Order number 1332.9460.34
Additional ports 13 to 16 for the R&S®ZNBT26
Order number 1332.9302.34
Additional ports 17 to 20 for the R&S®ZNBT26
Order number 1332.9319.34
Additional ports 21 to 24 for the R&S®ZNBT26
Order number 1332.9454.44
Additional ports 9 to 12 for the R&S®ZNBT40
Order number 1332.9460.44
Additional ports 13 to 16 for the R&S®ZNBT40
Order number 1332.9302.44
Additional ports 17 to 20 for the R&S®ZNBT40
Order number 1332.9319.44
Additional ports 21 to 24 for the R&S®ZNBT40
Order number 1332.9483.02
GPIB interface
Order number 1332.9490.02
Device control
Order number 1323.9290.00
Direct control cable
Order number 1332.9283.10
Additional removable hard disk for R&S®ZNBT with LPW10
Windows Embedded Standard 7 (32 bit)
Order number 1332.9283.11
Additional removable hard disk for R&S®ZNBT with LPW11
Windows Embedded Standard 7 (64 bit)
Order number 1332.9283.12
Additional removable SSD for R&S®ZNBT with LPW11
Windows 10 IoT Enterprise 2016 LTSB (64 bit)
Order number 1332.9283.13
Additional removable SSD for R&S®ZNBT with LPW11
Windows 10 IoT Enterprise 2021 LTSC (64 bit)
Order number 1332.9477.02
Precision frequency reference
Order number 1332.9502.02
DC inputs
Order number 1328.8857.02
Synthesizer upgrade for the R&S®ZNBT
Order number 1338.9262.02
Windows upgrade for R&S®ZNBT with LPW10, incl. 512 GB SSD and LPW11
Windows 10 IoT Enterprise 2021 LTSC (64 bit)
Order number 1338.9279.02
Windows upgrade for R&S®ZNBT with LPW11, incl. 512 GB SSD
Windows 10 IoT Enterprise 2021 LTSC (64 bit)
Order number 1175.3040.00
19" Rack Adapter
Order number 1325.5905.02
External RFFE GPIO Interface (MIPI)
Includes one R&S®ZN-Z25 interface cable adapters
Order number 1325.5905.03
External RFFE GPIO Interface (MIPI)
Including voltage and current measurements and includes one R&S®ZN-Z25 interface cable adapters
Order number 1326.6640.05
External handler I/O interface
Order number 1334.3424.02
Additional Interface Cable for R&S®ZN-Z15 RFFE GPIO Interface
(including adapters)
Order number 1318.8425.02
Time domain analysis (TDR)
Order number 1319.4400.02
Extended time domain analysis with eye diagram
Order number 1350.5063.02
Distance-to-fault (DTF)
Order number 1318.8431.02
Frequency conversion
Order number 1318.8448.02
Intermodulation measurements
requires R&S®ZNBT-K4
Order number 1318.8454.02
10 MHz receiver bandwidth
Order number 1319.4000.02
1 mHz frequency resolution
Order number 1328.8840.02
Pulsed source
Order number 1332.8406.02
Noise figure measurement
Order number 1338.9340.02
SNP assistant
Order number 1328.8634.02
EaZy deembedding (EZD) based on IEEE 370
for R&S®ZNBT;
Order number 1328.8640.02
In-Situ De-embedding (ISD) that covers IEEE 370
for R&S®ZNBT
Order number 1328.8657.02
Smart Fixture De-embedding (SFD)
for R&S®ZNBT
Order number 1328.8663.02
Delta-L 4.0 PCB characterization
for R&S®ZNBT
Order number 1338.8989.02
HUMS software option
Health and utilization monitoring service for R&S®ZNBT
Order number 1328.8534.10
Torque Wrench, 0.45 Nm
for 1.0 mm connectors, 6 mm width across flats
Order number 1328.8534.11
Torque Wrench, 0.23 Nm coupling torque
for 1.0 mm connectors with 6 mm width across flats
Order number 1328.8534.12
Torque Wrench, 0.34 Nm
for 1.0 mm connectors, 6 mm width across flats
Order number 1328.8534.19
Torque Wrench, 0.9 Nm
Order number 1328.8534.35
Torque Wrench
Torque Wrench for 3.5/2.92/2.4/1.85 mm connectors with 8 mm width across flats, 0.9 Nm coupling torque
Order number 1328.8534.71
Torque Wrench, 1.5 Nm
for type N connectors, 20 mm width across flats
Order number 0272.4010.50
Attenuator
0 Hz to 12.4 GHz, m/f 3 dB, 2 W
Order number 0272.4110.50
Attenuator
0 Hz to 12.4 GHz, m/f 6 dB, 2 W
Order number 0272.4210.50
Attenuator
0 Hz to 12.4 GHz, m/f 10 dB, 1 W
Order number 1073.8695.03
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 0272.4310.50
Attenuator
0 Hz to 12.4 GHz, m/f 20 dB, 1 W
Order number 1073.8695.06
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.20
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.10
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8695.30
High-Power Attenuator, 50 W
0 Hz to 2 GHz
Order number 1073.8495.03
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.06
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.10
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.20
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1073.8495.30
High-Power Attenuator, 100 W
0 Hz to 2 GHz
Order number 1035.1700.52
High-Power Attenuator, 50W
0 Hz to 6 GHz, 20 dB
Order number 1303.7840.02
50 Ohm broadband limiter
Order number 0272.4910.50
Termination, 50 Ω
1 W, DC to 4 GHz, N (m)
Order number 0272.4510.50
Precision Termination, 75 Ω
1 W, DC to 3 GHz, N (m)
Order number 0200.0019.55
UHF Termination , 50 Ω
0 Hz to 2 GHz, 100 W, N (f)
Order number 0289.8966.00
Feedthrough Termination, 50 Ω
0.5 W, DC to 1 GHz, BNC (m/f)
Order number 0844.9352.02
Feedthrough Termination, 50 Ω
2 W, DC to 500 MHz, BNC (m/f)
Order number 0358.5414.02
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
Order number 0358.5714.02
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
Order number 0358.5714.03
Matching Pad 50/75 Ω, series resistor 25 Ω
0 Hz to 3.3 GHz
Order number 0800.6612.52
Power Splitter, 2x 50 Ω
0 Hz to 2.7 GHz
Order number 1307.0886.02
2-way Wilkinson power divider
4 GHz to 27 GHz
Order number 3626.4937.02
Pulsar 4-way power divider, 5 GHz to 27 GHz
5 GHz to 27 GHz
Order number 1314.5380.00
Adapter SMA m/f angle
0 Hz to 18 GHz
Order number 1314.5373.00
Adapter SMA m/m angle
0 Hz to 18 GHz
Order number 1324.5001.02
Waveguide Coax Adapter, WR15 to 1.85 mm (male)
50 GHz to 75 GHz
Order number 3592.6727.02
Waveguide coax adapter, WR15 to 1 mm (m)
Order number 3592.6733.02
Waveguide Coax Adapter, WR15 to 1mm(f)
Order number 3626.1044.02
Waveguide Coax Adapter, WR15 to 1 mm (f)
50 GHz to 75 GHz
Order number 3626.1044.03
Waveguide Coax Adapter, WR15 to 1 mm (m)
50 GHz to 75 GHz
Order number 3626.1050.02
Waveguide Coax Adapter, WR12 to 1 mm (f)
60 GHz to 90 GHz
Order number 3626.1050.03
Waveguide Coax Adapter, WR12 to 1 mm (m)
60 GHz to 90 GHz
Order number 3626.1067.02
Waveguide Coax Adapter, WR10 to 1 mm (f)
75 GHz to 110 GHz
Order number 3626.1067.03
Waveguide Coax Adapter, WR10 to 1 mm (m)
75 GHz to 110 GHz
Related products
Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.
You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found
Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes
1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).
2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.
3. Participation is free of charge and not dependent on the purchase of goods or services.
4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.
5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:
Prize: 1x R&S®RTB2000 Digital Oscilloscope
6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.
7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.
8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.
9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.
10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.
11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.
12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.
13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.
* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.