1028 Results
21-Feb-2024
Rohde & Schwarz and SmartViser partner to demonstrate test solutions for new EEI regulationRohde & Schwarz and SmartViser have partnered to develop a solution for testing compliance with a new regulation that will require Energy Efficiency Index (EEI) labeling for smartphones and tablets sold in the EU.
01-Jun-2023
Rohde & Schwarz takes lead in number of GCF-validated 5G RedCap conformance test casesRohde & Schwarz has successfully validated 5G RedCap (reduced capability) test cases for its R&S CMX500 one-box signaling tester and R&S TS8980 conformance test system for the recent Conformance Agreement Group (CAG) #74 meeting, allowing the Global Certification Forum (GCF) to activate the respective work items in their device certification program.
21-Aug-2023
Rohde & Schwarz and MediaTek successfully verify 5G RedCap Rel. 17 connectivity with the R&S CMX500 OBTRohde & Schwarz and MediaTek partner to verify MediaTek’s 5G RedCap test platform, enabling 5G standalone devices like industrial sensors and always connected wearables. R&S CMX500 OBT tester supports RedCap and Release 17 features.
31-Oct-2023
Evolved for more challenges: Rohde & Schwarz adds eight-channel R&S MXO 5 to next-generation oscilloscopesRohde & Schwarz presents the new R&S MXO 5 oscilloscopes, its first with eight channels. It takes measurement performance to the next level.
28-Mar-2024
Rohde & Schwarz first to show measurements on novel Bluetooth® Channel Sounding signals for positioning accuracyRohde & Schwarz will present the first real-time measurements on the planned new Bluetooth® signals to support Channel Sounding. The demonstration at the embedded world Exhibition & Conference in Nuremberg, Germany, will be run on an R&S CMW500 wideband radio communication tester. The Bluetooth® Channel Sounding feature will enable unprecedented positioning accuracy for consumer and commercial applications. The signal measurement capabilities to support chip and device development are eagerly awaited by the industry.
06-Jun-2023
Automotive Testing Expo Europe 2023: Enabling the next level of ADAS with test & measurement solutions from Rohde & SchwarzAt Automotive Testing Expo Europe 2023 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of cutting-edge test solutions that support automotive applications. With test solutions on show that cover automotive radar, Ethernet, 5G and UWB, the company enables the automotive industry to make the next level of autonomous driving reality.
07-Nov-2023
When innovation meets production – Rohde & Schwarz exhibits at productronica 2023Innovation and production – hand in hand. The Rohde & Schwarz motto for this year’s productronica, where the company will present itself as a reliable partner for electronics manufacturing needs. Visit us at booth A1/375.
04-Sep-2023
Rohde & Schwarz unveils the future of security solutions with advanced scanner portfolio at International Security Expo 2023Rohde & Schwarz participates in the annual International Security Expo, taking place in Olympia, London, from September 26-27, 2023. At booth D20 Rohde & Schwarz will showcase its revolutionary R&S QPS product family, featuring the R&S QPS201 and R&S QPS Walk2000 security scanners for advanced people screening.
03-Jul-2023
Rohde & Schwarz and MediaTek verify industry's first 3GPP Rel. 17 NTN NB-IoT protocol conformance test casesRohde & Schwarz has partnered with MediaTek to verify the first NTN NB-IoT protocol conformance test cases in line with 3GPP Rel. 17 on MediaTek’s NTN IoT capable MT6825 chipset. This achievement is the next step towards NTN device conformity approval bringing next-generation IoT devices based on non-terrestrial networks (NTN) to the market.
09-Feb-2024
Rohde & Schwarz drives roll-out of NTN NB-IoT technology with new GCF-certified conformance test casesAt the recent Conformance Agreement Group (CAG) #77 meeting, Rohde & Schwarz has successfully verified the NTN NB-IoT test cases of work item 333 using its R&S CMW500 radio communication tester, allowing the Global Certification Forum (GCF) to activate the work item in their device certification program.
Increasing demands on power distribution networks have resulted in smaller DC rails, as well as a proliferation of rails that ensure clean power reaches the pins of integrated circuits.
07-Mar-2017
Unlike most power supplies in this class, the R&S®NGE100 power supplies feature 100 % electrically equivalent output channels. All outputs are earth-free and short-circuit-proof. The output channels can be combined in serial or in parallel to achieve higher voltages or higher currents (up to 96 V/9 A using all three channels of the R&S®NGE103)
04-Dec-2023
Rohde & Schwarz is first to deliver a 5G FR1 A-GNSS OTA test solution approved by CTIA CertificationThe R&S TS8991 over-the-air (OTA) test system from Rohde & Schwarz is the first to be approved by CTIA Certification for testing 5G A-GNSS antenna performance. This solution measures the performance of the global navigation satellite system (GNSS) receiver in a wireless device. This is critical because Assisted-GNSS is used for E911 emergency calls over 5G.
22-Dec-2023
Rohde & Schwarz verifies NXP’s next generation automotive radar sensor reference design for extremely short object distancesRohde & Schwarz verifies NXP’s next generation automotive radar sensor reference design for extremely short object distances
15-May-2024
Rohde & Schwarz introduces the MXO 5C series, the world’s most compact oscilloscope with up to 2 GHz bandwidthThe new MXO 5C is the first oscilloscope without an integrated display from Rohde & Schwarz. It delivers the same peformance as the previously introduced MXO 5 series, but with a fourth of the vertical height.
Verifying power integrity for DDR memories - The R&S ® RT-ZPR20 power rail probe is a specialized oscilloscope probe for very low-noise measurements on power.
05-Apr-2017
14-Dec-2023
Nokia Drone Networks launch in North America following successful collaboration with Rohde & Schwarz to secure FCC certificationNokia launches first FCC-certified 5G-connected drone-in-a-box solution. Collaboration with Rohde & Schwarz utilizes R&S CMX500 to proof standards compliance and reliability.
15-Feb-2024
Rohde & Schwarz enables Qualcomm to pioneer new frequency ranges for future 5G-Advanced and 6G networksRohde & Schwarz T&M equipment plays key role in enabling Qualcomm Technologies to show the readiness and effectiveness of the latest RF modem technology for FR3, the future frequency ranges for 5G-Advanced and 6G.
30-Aug-2023
Rohde & Schwarz showcases its latest mmWave test solutions at the European Microwave Week in BerlinJoin Rohde & Schwarz in Berlin for EuMW 2023, Europe's premier microwave event! Discover cutting-edge test solutions focused on early sub-THz research for 6G.
22-Feb-2024
Rohde & Schwarz and MediaTek to showcase 5G NTN-NR Rel.17 connection at MWC 2024Rohde & Schwarz and MediaTek have teamed up to demonstrate a 5G non-terrestrial network (NTN) new radio (NR) connection based on the latest 3GPP Release 17 specifications at this year's Mobile World Congress in Barcelona.
Rohde & Schwarz webinar from January 26, 2017 We explain the different features for low-power IoT designs and explore the value of end-to-end testing. Battery life of 10+ years is a key requirement for many Internet of Things (IoT) applications. 3GPP Release 12 and later releases added LTE features such as eMTC, NB-IoT, eDRX and power-saving mode (PSM) to meet this important requirement.
Logging and charting tool for DC power supplies.
14-Nov-2019 | AN-No. 1GP122
This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
15-Jun-2020 | AN-No. 1GP126
remote control user interface for multiple DC power supplies
27-Aug-2020 | AN-No. 1GP127
R&S NRQ6 Frequency Selective Power Sensor - Product Brochure
This application note applies to DC power supplies R&S®NGL200, R&S®NGM200, R&S®NGP800, R&S®NGU201 and R&S®NGU401, as well as LCR meters R&S®LCX100 and R&S®LCX200.
19-May-2022 | AN-No. 1GP135
How can I set up EMC32 so that it is possible to measure with the forward and reverse power with NAP?