231 Results
How can the external attenuation values be configured and embedded in the CMWRun test sequences?
My SW needs to validate its usage by means of a license available in a Dongle for testing with CMW 270/290/500, which are the requirements?
The IP connection security analysis solution for the R&S ® CMW500 platform identifies IP connection vulnerabilities in telematics units at an early stage of development.
18-Jul-2017
In commercial mobil networks the operator disables the access to data services when a mobile device use a not allowed APN. How can that be tested in the CMW and what has to be setup?
The battery life measurement solution for the R&S®CMW500 platform identifies which ECUs and which applications running on telematics units impact battery life.
23-Aug-2017
If a monitor is connected to the DVI ports of the CMX the maximal resolution is 800 x 600 pixel. How can that resoltuion be increade for a external monitor?
WCDMA RF Measurements with the R&S<sup>®</sup>CMW500 according to 3GPP TS 34.121
16-Dec-2011 | AN-No. 1CM95
Simultaneous DL throughput verification and UL transmission testing with the R&S®CMW500
29-Jul-2009
I have a file on my device. How can I get it in a simple way to my PC?
The R&S CMW500 mobile radio tester, the unrivaled network simulator for all IoT technologies, supports latest 3GPP Release 17 NB-NTN technology for R&D and type approval testing. cmw500, 5GNR 3GPP Release 17 NB-NTN (non-terrestrial networks) device testing
Watch this video to discover the R&S CMW500 radio communication tester, now supporting optimal NB-NTN functionality, Rohde & Schwarz's advanced NB-IoT testing solution is powered by the R&S CMW500 radio communication tester, now supporting optimal NB-NTN functionality. Our services involve but are not limited to R&D, conformance, and operator testing scenarios.
Application video, videos MWC2017, CMW500, CMWcards, IoT signaling test, eMTC, NB-IoT, GSMA, Mobile World Congress, MWC 2017 This video shows IoT device signaling test made simple with R&S®CMWcards presented at GSMA MWC 2017
Application video, videos MWC2017, CMW500, IP connection security, GSMA, Mobile World Congress, MWC 2017 This video shows mobile IP connection security analysis presented at GSMA MWC 2017
04-Jan-2018
Rohde & Schwarz offers independently certified eCall test solutionThe market-leading eCall test solution from Rohde & Schwarz is the first of its kind to be certified by an independent test body. CETECOM has examined the implementation of the eCall test public safety answering point (PSAP) in the Rohde & Schwarz solution for the pan-European emergency call system and certified it as compliant with the CEN EN 16454:2015 standard.
The R&S®CMW500 radio communication tester emulates an LTE network with integrated IMS server. Equipped with the R&S®CMW-KA096 test software enables to test NG eCall-capable in-vehicle systems.
The R&S®CMW500 wideband radio communication tester supports versatile automated test scenarios for analysis and troubleshooting of these effects. Rohde & Schwarz demonstrated a one-box solution for testing mobile communications devices that integrate multiple radio technologies at the GSMA Mobile World Congress 2016 in Barcelona.
Assisting Tools for Operation of Windows-Based T&M Instruments
13-Jun-2013 | AN-No. 1MA218
CDMA2000<sup>®</sup> 1xRTT and 1xEV-DO Access Probe and Standby Power Measurements with the R&S<sup>®</sup> CMW500
25-May-2012 | AN-No. 1CM99
When starting MOS audio quality measurments with CMWRun connected to a CMW communication tester and an UPV audio analyzer, a failure message occurs that the calibration files "mobile_in.ccl" and "mobile_out.ccl" can not be found.
Learn more about the evolution of LTE UE categories and how to verify UE performance based on its corresponding category with the R&S®CMW500 wideband radio communication tester from Rohde & Schwarz.
Rohde & Schwarz are introducing a demonstration of our C-V2X RF testing capabilities based on our R&S®CMW500 system against an Industry leading Device. Cellular-V2X (C-V2X) is a key technology which will improve road safety in the coming years. Rohde & Schwarz are introducing a demonstration of our C-V2X RF testing capabilities based on our R&S®CMW500 system against an Industry leading Device.
The R&S®CMWflexx setup based on R&S®CMW500 wideband radio communication testers generates five component carriers (5CC) with 4x4 MIMO each using 256QAM modulation, resulting in a DL data rate of close to 2 Gbit/s.
This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD) measurement functionality.
09-Apr-2015 | AN-No. 1CM103
, CMW500, wideband radio, communication tester, cellular handset devices, LTE-Advanced protocol testing, VoLTE IMS, Rohde & Schwarz presented smart network emulation for all state-of-the-art mobile device tests at the GSMA Mobile World Congress 2016 in Barcelona.
The R&S®CMW500 RF communications tester provides an easy-to-configure, fully integrated IMS server infrastructure with reliable test conditions and now supports EVS-based voice over IMS calls in combination with various mobile technologies, such as LTE or voice over WLAN (VoWLAN) scenarios. enhanced voice services, EVS, codec support, SWB bandwidths, high-quality, VoLTE calls, CMW500 RF, communications
The R&S ® CMW500 wideband radio communication tester supports test cases for cellular IoT in line with the 3GPP standard. The solution is upgradeable to the R&S ® TS8980FTA conformance test system to fully cover RF test cases.
26-Mar-2024
embedded world 2024: Rohde & Schwarz presents its cutting-edge test solutions for embedded systemsRohde & Schwarz offers comprehensive test and measurement solutions for embedded design challenges for today’s requirements for efficiency, safety, reliability and interoperability. The highlights will be showcased at the embedded world Exhibition & Conference 2024 in Nuremberg, Germany.
MWC2019, CMW500, CMX500, FR1, FR2, non-standalone mode, NSA, 5G NR, LTE Rohde & Schwarz presents an integrated 5G signaling solution for FR1 and FR2 that can be seamlessly integrated into an existing LTE test environment at GSMA Mobile World Congress 2019 in Barcelona.
MWC2019, CMW500, SMBV100B, SMBV100A, c-V2X testing, cellular V2X Vector CANoe, GSMA, Mobile World Congress Testing critial V2X traffic scenarios in the lab is important for the automotive industry.
This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).
03-Nov-2015 | AN-No. 1MA194