341 Results
This application note describes how to generate and analyze wideband digitally modulated signals in the mm-wave range. Rohde & Schwarz measuring equipment and some 3rd party off-the-shelf accessories are used for both signal generation and analysis.
02-Sep-2014 | AN-No. 1MA217
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
27-Nov-2018
DOCOMO and Rohde & Schwarz cooperate in pioneering beyond 5G with frequency bands up to 150 GHzNTT DOCOMO INC. and Rohde & Schwarz have joined forces set up the world's first ultra-wideband channel sounder for mobile communications exceeding 100 GHz. They conducted radio wave propagation experiments at frequencies up to 150 GHz. The frequency bands from 100 GHz to 300 GHz are expected to enable further high-speed and large-capacity communication for the next generation beyond 5G.
Signal analysis of the 5G NR personality is demonstrated on the R&S FSW signal and spectrum analyzer. The demystifying 5G video series discusses main topics related to 5G including new technology components, procedures and testing challenges. 5G NR and LTE coexistence | Rohde & Schwarz 5G NR and LTE coexistence | Rohde & Schwarz
The test setup, demonstrated in this video, operates at 82.5 GHz and is based on the R&S®AFQ100A baseband generator, the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates video, SMW200A, FSW, signal generator, signal analyzer, signal demodulation, UFMC How to generate UFMC signals?
Watch the '5G is now' video series to gain more insights into the 5G technology or read the 5G technology book online at www.rohde-schwarz.com/5G-ebook . 5G, new radio, air interface, numerology, SMW200A, FSW, 5G ebook Take a closer look into the air interface aspects of 5G. 5G provides a flexible numerology to support different services in the most efficient way.
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, signal demodulation, UFMC How to demodulate UFMC signals? Universal filter multi carrier (UFMC) is one of the deliverables of the EU-funded 5GNOW project.
With R&S®FE170 frontends, Rohde & Schwarz introduces innovative up- and down- frequency converters, providing both high performance and a simple setup with R&S®SMW200A signal generators and R&S®FSW signal and spectrum analyzers. No additional external sources are required, with all devices automatically recognized and all necessary calibration data transferred automatically.
Together with R&S®FE170 frontends as up- and down- frequency converters, and an R&S®FSW signal and spectrum analyzer, this video demonstrates how to generate, transmit over the air, and analyze a 4 GHz bandwidth single carrier signal with 16QAM modulation at 148 GHz.
This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.
09-Oct-2014 | AN-No. 1MA143
A versatile RF Fading Simulator can easily be built using an R&S®FSW, R&S®FSQ, R&S®FSG, R&S®FSV signal analyzer.
27-Feb-2015 | AN-No. 1MA145
26-Oct-2022
Rohde & Schwarz joins forces with Tsinghua University, Actenna Technology and others to conduct RIS technology trialsTo further exploit the huge potential of 5G, the wireless industry has continued to develop the standard up to Release 16, and development continues. But technology does not stand still, and even as 5G presses forward, a new generation of cellular technology is emerging. Cutting-edge 6G research is already underway at communications equipment manufacturers and research institutions, and reconfigurable intelligent surfaces (RIS) is a major area of interest in 6G research. Rohde & Schwarz, with Tsinghua University and Actenna Technology, recently completed an evaluation and trial of RIS technology to comprehensively evaluate the effects and performance of RIS deployment.
This application note focuses on how to measure and analyze FMCW radar signals with up to 6 GHz bandwidth with an R&S® RTP oscilloscope.
07-Aug-2019 | AN-No. GFM318
The ARB Toolbox is an easy-to-use, feature packed software package that is used for many ARB waveform related tasks.
13-Dec-2018 | AN-No. 1GP88
09-Nov-2020
Rohde & Schwarz helps to protect Dutch soldiers in the fieldRohde & Schwarz Benelux to provide signal and spectrum analyzing and recording solutions for the Netherlands’ Defence Material Organization TESLA-M project.
This Application Note describes the differences in intermodulation distortion measurements between traditional spectrum analyzers with analog narrow-band IF signal path and modern spectrum analyzers using a wide-band IF signal path and digital RBW filters.
02-Jul-2012 | AN-No. 1EF79
This white paper describes the interaction between intermodulation products generated by a device under test (DUT) and intermodulation products generated internally in a spectrum analyzer.
29-Nov-2012 | AN-No. 1MA219
This application note gives a short summary on the Allan variance as a measure of frequency stability and an example on how to calculate it, with measurement results from R&S spectrum analyzers.
11-Feb-2009 | AN-No. 1EF69
The analog demodulation measurement application R&S®FSxx-K7 performs frequency and phase settling time measurements using a modern wideband concept..
18-Jun-2022 | AN-No. 1EF112
This application note describes the differences in sweep speed between swept spectrum analyzers and modern spectrum analyzers with a wide-band FFT process, and how this improves the measurement speed for general spurious measurement.
10-Jul-2012 | AN-No. 1EF80
This document provides the technical specifications of the VSE-K144 / -K146 / -K148 / -K171 / -K175 / FSx-K144 / -K145 / -K147 / -K148 / -K171 / -K175 / FPS-K144 / -K148 5G NR measurement application
This document describes how a Windows®-based R&S® T&M instrument is remotely operated by an Android™ tablet as if working on it locally.
22-Aug-2013 | AN-No. 1MA236
This application note introduces the concept of multistandard radio base stations as well as solutions for transmitter and receiver tests based on Rohde & Schwarz signal generators and Rohde & Schwarz signal and spectrum analyzers.
06-Jul-2012 | AN-No. 1MA198
radiated conformance testing according to TS 38.141-2, Rel. 16
This application note describes all mandatory radiated RF transmitter tests (TS 38.141-2, chapter 6), according to Release 16.
20-Dec-2019 | AN-No. GFM324
23-Jun-2021
Rohde & Schwarz presents mobile network infrastructure testing from design to production at MWC21 in BarcelonaRadio access network (RAN) landscapes deploy various kinds of infrastructure equipment, ranging from macro to small cell base stations. Evolving 5G NR technology in particular makes infrastructure equipment testing challenging due to increasing MIMO complexity and beamforming, wider bandwidths and new spectrum bands up to the mmWave range. Mobile World Congress is returning to Barcelona in June 2021, and Rohde & Schwarz will be showcasing its latest class-leading mobile network infrastructure testing solutions, which address various needs and enable the mobile industry to leverage the opportunities of 5G.
06-Nov-2019
Rohde & Schwarz together with Fraunhofer Institutes HHI and IAF join forces in researching 6G at THz frequenciesWhile the new 5G technology is at the first stages of rollout, Rohde & Schwarz, the Fraunhofer Institute for Telecommunications, Heinrich Hertz Institute, HHI and the Fraunhofer Institute for Applied Solid State Physics IAF are taking a step further with demonstrations in the terahertz (THz) frequency band, related to the 6th generation wireless mobile communication (6G). The collaboration has resulted in a wireless transmit and receive system operating between 270 and 320 GHz, with further frequency extensions for potential 6G bands already in preparation.
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
17-Aug-2022
VIAVI and Rohde & Schwarz support Auray OTIC in awarding O-RAN conformance certification for international marketsThe Auray O-RAN Testing and Integration Centre (OTIC) and Security Lab provides test, validation and integration services to a supply chain of open radio access network vendors. In their first successful certification of an O-RAN radio unit (O-RU) according to O-RAN ALLIANCE as part of the O-RAN Certification and Badging Program, Auray OTIC relied on the integrated solution for O-RU conformance testing by Rohde & Schwarz and VIAVI.
25-Sep-2020
Rohde & Schwarz offers portfolio for precise AESA testingRohde & Schwarz offers new test and measurement solutions for TRM performance validation, enabling the customer to maximize their radar system capabilities.