73 Results
Aplication video, videos MWC2017, TS-LBS, test system, LPP, LPPe, LTE, WLAN, Wi-Fi, Bluetooth, location based services this video shows first LPPe for conformance and network operators test plans presented at GSMA MWC 2017
08-Jun-2022
Rohde & Schwarz presents its full range of embedded systems test solutions at embedded world 2022Nuremberg will be home to the international embedded industry once again during embedded world Exhibition & Conference. Rohde & Schwarz will be showing its latest test solutions from June 21 to 23, 2022 at booth 4-218 of Nuremberg Exhibition Centre. There, visitors can experience product highlights like the new generation of the R&S RTP high-performance oscilloscope, and they can learn from the Rohde & Schwarz experts about state-of-the art test solutions for all kinds of embedded systems.
The R&S CMP180 offers a frequency range up to 8 GHz and a bandwidth up to 500 MHz and enables simultaneous testing of multiple DUTs supporting cellular technologies up to 5G NR-FR1 and non-cellular technologies such as Bluetooth and Wi-Fi and many more. CMP180, 5G Wi-Fi 7 (IEEE 802.11be) 4x4 true-MIMO testing
09-Nov-2020
New Rohde & Schwarz System Amplifier Targets Microwave Device ManufacturersSAM100 targets manufacturers of passive and active microwave components and microwave devices for mobile radio (UMTS, LTE, 4G & 5 G), IoT (WLAN, Bluetooth), satellite and radar applications.
Versatile Software Tool for Rohde & Schwarz Instruments
RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
27-Oct-2021
China Mobile purchases R&S SMM100A vector signal generator for 5G testingRecently, China Mobile has selected the R&S SMM100A vector signal generator from Rohde & Schwarz to validate its 5G technology. The new signal source generates 5G signals in research applications to verify current and future 5G technologies. The project is a continuation of the long term cooperation between China Mobile and Rohde & Schwarz China.
09-Nov-2021
Rohde & Schwarz joins Car Connectivity Consortium to support development of smartphone-to-car communications including UWBRohde & Schwarz has joined the Car Connectivity Consortium (CCC) to support the organization's mission to foster industrywide standards for communications between vehicles and smartphones. The company will contribute its broad expertise in mobile device and automotive technology testing. In particular, the company will provide its solutions for the development and production of UWB devices and modules for automotive applications such as keyless vehicle access.
13-Oct-2020
Rohde & Schwarz propels 5G LBS with Assisted-GPS and 5G NR FR2 mmW performance testingAs wireless network operators roll out 5G NR in the millimeter wave spectrum, it is critical to ensure continued reliability of E911 calls and accurate determination of location in mobile devices.
This is especially important for applications such as Bluetooth hands-free calling and eCall. The process starts accurately measuring speech quality over a 5G connection in a lab environment, such as the HEAD acoustics facility in Aachen, Germany.
Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.
26-Apr-2013 | AN-No. 1GP72
08-Feb-2018
MWC 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP securityMobile World Congress 2018: Rohde & Schwarz to present cutting-edge T&M equipment for 5G, LTE-A Pro, IoT and IP security
To ensure connectivity and trouble-free operation, each Bluetooth® enabled device has to be tested for conformance with Bluetooth SIG standards and regulatory requirements.
23-Nov-2017
This document describes Bluetooth Low Energy RF over-the-air RX and TX measurements using advertising channels for communication with Bluetooth Low Energy devices.
14-Dec-2020 | AN-No. 1C109
This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5.
19-Jun-2017 | AN-No. 1MA282
Bluetooth® Low Energy channel sounding validation
06-Sep-2023
This document describes the direct test mode mechanisms for testing Bluetooth Low Energy devices and explains how the direct test mode connection is established. The R&S CMW uses a USB port for the direct test mode connection while the Equipment under Test (EUT) may provide a USB port, a serial port or even a 2-wire UART interface for this purpose. Installing or assigning the right driver for the EUT is the main configuration task on the R&S CMW. For EUTs with USB port, the R&S CMW provides a Bluetooth Low Energy USB driver which has to be assigned to the connected EUT.
14-Dec-2016 | AN-No. 1C105
This document describes the adaptive frequency hopping mechanism for improved signaling performance in Bluetooth Basic Rate and Enhanced Data Rate devices.The R&S CMW provides this feature for remote operation in TX, Loopback and Connection test mode. Thereby the R&S CMW acts as a master, while the Equipment under Test (EUT) represents the slave(s) of the piconet.
14-Dec-2016 | AN-No. 1C108
The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.
27-Jan-2017
Transmitter and Receiver Measurements on Bluetooth Modules with CMU200
06-Aug-2001 | AN-No. 1MA46
Bluetooth Transmitter Measurements without Connection Setup
04-Feb-2003 | AN-No. 1MA49
The Rohde & Schwarz Bluetooth RF test solution with the R&S CMW and R&S CMWrun is closely aligned to the Bluetooth RF Test Suite. This document describes common setups for these tests and the required configurations.
04-May-2015 | AN-No. 1MA261
09-Sep-2020
Cooper General provides 5G device service and repair with Rohde & Schwarz equipmentUtilizing the R&S CMW500 and the R&S CMX500 wideband radio communication testers, Cooper General now offers support and repair services for both 4G/LTE and 5G devices.
Smartly verify and decode Bluetooth® Low Energy (BLE) transmit signals with a reliable and costefficient spectrum analyzer – the R&S®FPC.
17-May-2018
Generating Bluetooth RF Test Signals with SMIQ Signal Generator
30-Jan-2001 | AN-No. 1MA31
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S®CBTgo software.
18-Jul-2013 | AN-No. 1MA200
This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software.
06-Mar-2013 | AN-No. 1MA106
This document provides the technical specifications of the R&S®FSx-K8 Bluetooth® measurement application.
04-Jan-2018
Rohde & Schwarz offers independently certified eCall test solutionThe market-leading eCall test solution from Rohde & Schwarz is the first of its kind to be certified by an independent test body. CETECOM has examined the implementation of the eCall test public safety answering point (PSAP) in the Rohde & Schwarz solution for the pan-European emergency call system and certified it as compliant with the CEN EN 16454:2015 standard.
This application note gives the guidance of how to perform the BLE 5.1 DF RF tests according to the RF test specification of BT 5.1 by using the Rohde & Schwarz test solutions.
30-Oct-2019 | AN-No. GFM327