62 Results
Firmware for R&S®SMC100A Signal Generator
The following abbreviations are used throughout this document: R&S ®SMC100A is abbreviated as R&S SMC100A.
Drivers for R&S®SMC100A Signal Generator
Current revision of instrument driver supports these instruments and firmware versions: Instrument Supported Firmware Remarks SMB100A 3.20 SMC100A 3.20 Getting Started Rohde & Schwarz 4 2 Getting Started 2.1 LabWindows/CVI driver The Rohde & Schwarz rssmb Instrument driver can be used in LabWindows/CVI 6 and later.
R&S®SMC100A Signal Generator Operating Manual
online versionDescribes all instrument functions and remote control commands, as well as measurement and programming examples.Includes the contents of the Quick Start Guide manual.The online version is meant for immediate display (no download required).
R&S®SMC100A Signal Generator Instrument Security Procedures
Provides information on security issues when working with R&S®SMC100A in secure areas.
R&S®SMC100A Signal Generator Quick Start Guide
Provides the information required to prepare the instrument for use and start working.Basic operations and handling are described.
Remote Emulation with the R&S®SMC100A Signal Generator
The R&S®SMC100A signal generator offers a remote emulation feature that makes it possible to control the instrument by commands other than the built-in native SCPI commands. This feature allows the user to replace signal generators, e.g. from other manufacturers, with the R&S®SMC100A without having to change the remote control code. This application note describes how to use the remote emulation feature in general. Furthermore, it describes in detail the remote emulation for each supported instrument, limitations of the individual emulations and the remaining differences between the emulated and the original commands.
28-Feb-2012 | AN-No. 1GP90
T&M solutions for software defined radios (SDR)
This document provides an introduction to SDR as used for military radios and presents the relevant T&M solutions offered by Rohde & Schwarz.
15-Sep-2012 | AN-No. 1MA206
Connectivity of Rohde&Schwarz Signal Generators
Rohde & Schwarz signal generators can be connected in various ways to system controllers (typically PCs) and external PC peripherals. Although most of these connection operations are also explained in the instrument manuals, it is not always easy to maintain an overview. Operating manuals commonly focus on explaining a dedicated feature of a single instrument. This application note examines a range of typical user tasks and how to solve them with the different instruments.
26-Apr-2013 | AN-No. 1GP72
Bluetooth® Low Energy (V5.0) RF-Test for Internet of Things Applications
More and more everyday items such as household appliances, vehicles, lights, etc. are now connected to the Internet, forming what is known as the "Internet of Things". Even clothing with sewn-in sensors to measure vital functions can now connect to the Internet and transmit data to cloud services. These different things use a variety of wireless technology standards to establish a connection. Due to its popularity, one of the most important standards is Bluetooth (or Bluetooth Low Energy). Before a new product with Bluetooth functionality can be launched, the qualification process defined by the Bluetooth SIG must be successfully completed. To save time and money, performance tests need to be performed in the development stage. This application note describes how to use the R&S CMW platform to perform the measurements defined in Bluetooth test specification version 5. As an alternative solution, we also cover how to perform almost all of the measurements with a spectrum analyzer and signal generator.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rohde & Schwarz is under license.
19-Jun-2017 | AN-No. 1MA282
RSCommander
Versatile Software Tool for Rohde & Schwarz Instruments RSCommander is a versatile software tool for a wide range of Rohde & Schwarz spectrum-, network analyzers, signal generators and oscilloscopes. It allows for automatic instrument discovery, making screenshots, reading traces, file transfer and simple script creation.
24-Dec-2017 | AN-No. 1MA074
Rohde & Schwarz Health Guide – For signal generators - Flyer
The Rohde & Schwarz Health Guide for signal generators gives advice to prevent electrical and mechanical damage.
Measurements on RF and AF Filters with Rohde & Schwarz Value Instruments
This application note describes the basic frequency filter measurements that are often required during service repairs, during development of simple circuits and for training purposes. These measurements do not always require high-end T&M equipment. Instruments in this class typically offer a very wide range of measurement functions coupled with the best-possible RF performance. However, these features are not necessary for simple applications. This application note therefore describes measurements using instruments from the cost-effective Rohde & Schwarz Value Instruments series. The instruments in this series offer the measurement accuracy demanded by quality-conscious users plus easy operation and all of the functionality needed for everyday measurement tasks.
27-Mar-2015 | AN-No. 1MA243
Using R&S®Forum Application for Instrument Remote Control
Using R&S®Forum Application for Instrument Remote Control
28-Jun-2018 | AN-No. 1MA196
Top Ten SCPI Programming Tips for Signal Generators
This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.
26-Apr-2013 | AN-No. 1GP79
R&S MATLAB® Toolkit for Signal Generators
The R&S MATLAB® Toolkit for Signal Generators provides routines for remote controlling these instruments. Additional MATLAB® scripts turn I/Q vectors into the Rohde & Schwarz waveform file format for use with an ARB. This application note describes the installation and use of the R&S MATLAB® Toolkit on Microsoft Widows and Linux based systems.
26-Apr-2013 | AN-No. 1GP60
Rohde & Schwarz Drivers under VEE - Installation and Troubleshooting
The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards.
20-Dec-2012 | AN-No. 1MA035
How to use Rohde & Schwarz Instruments in MATLAB
This application note outlines two different approaches for remote-controlling Rohde & Schwarz instruments out of MathWorks MATLAB: The first one uses VISA connection and direct SCPI commands. The second approach takes advantage of Rohde & Schwarz VXI plug&play instrument drivers and MATLAB Instrument Control Toolbox.
12-Jun-2017 | AN-No. 1MA171
Measuring the Nonlinearities of RF Amplifiers Using Signal Generators and a Spectrum Analyzer
A typical application for signal generators and spectrum analyzers is measuring nonlinearities of RF amplifiers. This application note discusses the basics of nonlinearities and describes the nonlinearity measurement using the R&S Value Instruments RF Signal Generator R&S®SMC100A and Spectrum Analyzer R&S®FSC.
20-May-2014 | AN-No. 1MA71
R&S®LegacyPro - Instrument emulation – breathing new life into existing test systems - Brochure
Retain your current test system software, benefit from Rohde & Schwarz experience in code emulation and rely on Rohde & Schwarz long-term support.
Signal generator portfolio - Flyer
The Rohde & Schwarz signal generator portfolio ranges from ultra compact, uniquely fast analog and vector signal sources for production and automated test environments to industry-leading analog and vector signal generators for R&D in the telecommunications, A&D and semiconductor sectors.
GDE Test Sequencer
GDE (= Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool. The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files.
15-Dec-2008 | AN-No. 1MA83
Modulation and Signal Generation with R&S®Signal Generators
Signal generators play a vital role in electrical test and measurement. They generate the test signals that are applied to components such as filters and amplifier, or even to entire modules, in order to ascertain and test their behavior and characteristics. The first part of this educational note presents the applications for and the most important types of signal generators. This is followed by a description of the construction and functioning of analog and vector signal generators. To permit a better understanding of the specifications found on data sheets, a closer look at the most important parameters for a signal generator is provided.Beyond the output of spectrally pure signals, a key function of RF signal generators is the generation of analog- and digitally modulated signals. The second part of this note therefore presents the fundamentals for the most significant analog and digital modulation methods.The third part of this educational note contains exercises on the topics of analog and digital modulation. All described measurements were performed using the R&S®SMBV100A vector signal generator and the R&S®FSV spectrum analyzer.
03-May-2016 | AN-No. 1MA225
Development Hints and Best Practices for Using Instrument Drivers
The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers will be explained.
01-Jan-2013 | AN-No. 1MA153
Importing Data in ARB, Custom Digital Modulation and RF List Mode
The foregoing application note is intended for everyone who desires to become more familiar with the use and upload of custom data in ARB, digital modulation and RF list mode. Particularly, this note describes the instruments R&S® SMW200A, R&S® SGT100A, R&S® SMBV100A, R&S® SMU200A, R&S® SMJ100A and R&S® SMATE200A and provides an overview of already available solutions as well as it gives hints for the writing of own applications. Please also see the application note 1GP88 for the ARB Toolbox software and the application note 1GP96 for the CDM-Toolbox software.
22-Dec-2010 | AN-No. 1GP62
Fast Remote Instrument Control with HiSLIP
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
R&S®VISA
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.
26-May-2020 | AN-No. 1DC02