Webpage, VNC and FTP for Rohde & Schwarz DC power supplies and R&S®LCX LCR meters

27-Apr-2023

Quality Measurements on Digital and Analog TV Transmitters - Using the R&S ETL

19-Sep-2007 | AN-No. 7BM67

Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.

28-Feb-2024

The R&S®FSQ signal analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.

17-Jan-2017

The R&S®ZNH handheld vector network analyzer with a built-in source allows fast, convenient on-site measurements on the ILS antenna system.

09-Aug-2021

This application note describes a technique to perform a calibrated noise power measurement (P_hot) with spectrum analyzers and noise sources.

31-May-2022 | AN-No. 1EF113

Phase Noise Measurements with Spectrum Analyzers of the FSE family

16-Jan-2002 | AN-No. 1EF16

This application note shows how to perform user equipment (UE) receiver tests, such as block error rate (BLER) and throughput tests, under fading conditions with the R&S®CMW500 RF tester and the R&S®SMW200A vector signal generator in LTE(-A), W-CDMA (HSPA+), TD-SCDMA and GSM (GRPS and EGPRS(2)).

03-Nov-2015 | AN-No. 1MA194

R&S IMS Hardware Setup according IEC / EN 61000-4-3 (radiated immunity)

29-Mar-2007 | AN-No. 1SP32

LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.

14-Jul-2016 | AN-No. 1MA272

Simple open design

15-Apr-2019

The R&S®FSW signal and spectrum analyzer offers fast and easy-to-use transmitter testing for the demanding DOCSIS 3.1 cable modem (CM) and cable modem termination system (CMTS) requirements.

12-Apr-2016

The R&S®CMW wireless communication tester are ideal for designing and verifying Bluetooth® Low Energy (LE) circuits and modules.

27-Jan-2017

Automotive mobility testing with R&S®CMWcards

09-Apr-2019

Measurements on A/D Converters with Audio Analyzer UPL or UPD

26-Jun-1998 | AN-No. 1GA30

R&S VCS-4G for geographically distributed voice communications systems.

17-Jun-2013

A turnkey 5G Field-to-Lab solution based on R&S®CMX500

On the path to the 5G NR network commercialization and service launch, field test is one of the essential user centric processes that User Equipment (UE) vendors should go through

16-Jul-2021 | AN-No. 1SL369

SynMatrix advanced computer-aided tuning enables real time filter optimization in an easy guided process using the network analyzers from Rohde & Schwarz.

02-May-2024

Fokus EMI debugging

24-Jul-2024

With the RTO-K17/RTE-K17 High Definition Option the user will see more signal details with up to 16 bit vertical resolution.

13-Apr-2015 | AN-No. 1TD06

Fault identification in single elements of antenna arrays is possible by scanning in near-field range and applying the near-field to far-field transformation method.

24-Mar-2020

Noise Figure Measurements on Amplifiers in Pulsed Mode

19-Dec-2000 | AN-No. 1MA32

This application note explains how to synchronize multiple R&S®SMBV100A vector signal generators.

09-Jul-2013 | AN-No. 1GP84

NB-IoT field-tolab testing with R&S®CMWcards

19-Feb-2019

The R&S®RF Ports Alignment Software together with the R&S®SMW-K545 option provides a standard and tailored solution for calibrating and aligning the amplitude, group delay and phase between the RF ports of multiple coupled dual-path or single-path R&S®SMW200A vector signal generators.

08-Jul-2022

This application note provides insights into generating radar signals for hardware-in-the-loop testing with the R&S®SMW200A. Including an introduction to HIL testing and realtime o

22-Jan-2021 | AN-No. 1GP124

DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW

06-Dec-2016

Creating Test Scenarios in Accordance with IEC 62002 Ed. 2.0 (MBRAI) Using the R&S SFU

28-Nov-2007 | AN-No. 7BM61

This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy cable assemblies supporting USB3.1 Gen2, USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.

18-Jan-2024 | AN-No. 1SL406

3GPP Receiver Test Under Fading Conditions With CMU and SMIQ.

01-Mar-2005 | AN-No. 1MA76