Simplifying FM radio transceiver testing

13-Mar-2019

Interface Control Document for xDW streaming

17-Mar-2022 | AN-No. 1GP134

Camera, display and multimedia testing on automotive in-vehicle infotainment (IVI) systems

24-Apr-2018

Rohde & Schwarz signal generators and spectrum analyzers can be used to test IEEE 802.11ax stations in terms of uplink accuracy requirements.

09-Nov-2017

Its high measurement speed makes the R&S ® EVS300 level and modulation analyzer ideal for reliable ILS runway measurements at maximum speed.

16-Dec-2015

In this Application Note, illustrative measurements of individual RFFE components, as well as a complete RFFE, will be made.

27-Feb-2017 | AN-No. 1MA299

Polar Modulation with R&S SMU200A

26-Nov-2004 | AN-No. 1GP58

Modern communications devices support a large number of standards in a very small space, which can lead to interference due to occupying the same frequency bands.

14-Mar-2016

GSM Mobile Tests under Conditions of Fading

07-Nov-1997 | AN-No. 1MA02

The R&S ZNB vector network analyzer is easy to configure and calibrate using the built-in intermodulation wizard.

19-Dec-2013

Receiver and LNB characterization

12-Jun-2025

SMIQ as Fading Simulator for External Signals

09-Mar-1998 | AN-No. 1MA07

Digital pre-distortion (DPD) is a common method. This article describes an approach to generate a pre-distorted signal based on a hard-clipper.

13-Sep-2017 | AN-No. 1EF99

Increase the IP connection security of your IoT device

04-Apr-2017

Satellite ground station testing up to 44 GHz with the R&S®Spectrum Rider FPH handheld spectrum analyzer

24-Jul-2024

Combining a low-noise oscilloscope with a power rail probe provides a measurement system that delivers measurements that are more accurate.

03-Jan-2018

The application note guides developers and manufactures of Sigfox Devices to perform the required and recommended measurements with test solutions from Rohde & Schwarz.

15-Nov-2017 | AN-No. 1MA294

R&S®ESMD Increasing timestamp accuracy in TDOA applications - Application Card

30-Apr-2013

Testing automotive radars against norm interferers; The R&S ® Pulse Sequencer software simulates arbitrary RF environments and supports the generation of radar norm interferers to test automotive radars operating in the 24 GHz, 77 GHz and 79 GHz frequency band.

20-Oct-2016

R&S®Spectrum Rider FPH makes interference hunting in factories simple and efficient. RF interferers can be identified and actions taken to ensure smooth operation.

23-Jul-2024

EVM Measurements for ZigBee signals in the 2.4 GHz band

12-Dec-2014 | AN-No. 1EF55

The Rohde & Schwarz oscilloscope R&S®RTO2064 with powerful FFT analysis is great for EMI debugging and a low cost solution for R&D testing.

14-Jan-2021

Carrier Aggregation for IEEE 802.16m. Signal Generation and Analysis

22-Mar-2010 | AN-No. 1MA173

Ensure a high level of performance and reduce performance degradation of automotive radar sensors caused by radomes and bumpers with the R&S®QAR50.

21-Apr-2022

Noise figure is an important parameter that describes the noise contribution of an electronic device. A classical approach to measure the noise figure is to use a noise source which delivers two different input noise powers by switching between a “hot” and a “cold” state and a noise receiver

23-Dec-2021 | AN-No. 1SL378

Part 1 of the Cable and Antenna verification series – essential for Mobile Networks

Return loss and decoupling measurements on antenna systems executed by a cable and antenna tester are crucial for proper operation of mobile networks

23-Feb-2024 | AN-No. 8NT11

The alternative approach presented in this paper employs a low phase noise local oscillator for direct down-conversion of the DUT signal.

09-May-2016

The combination of high power and current being sharply switched on and off has a lot of potential for EMI.

30-Jun-2019

FSxRecordPlay is a program for recording the trace data in frequency and time domain from Rohde & Schwarz spectrum analyzers and measurement receivers via IEEE bus, LAN/Internet or internal remote control connection.

20-May-2010 | AN-No. RAC-0605-0004

For system verification and debugging, eye diagram measurements are the most important tools for efficiently analyzing the signal integrity in any digital design

19-Feb-2019