Search

Find relevant information on products, solutions or downloads quickly by using our general search: Type in a keyword, choose a category and select from the active subcategories to get what you need.

Results 1 - 10 of 429 amiq

Did you find what you're looking for? If not, repeat the search on our International Website

  • R&S®AMIQ I/Q Modulation Generator

    Key FactsThe I/Q Modulation Generator R&S®AMIQ and the Simulation Software R&S®WinIQSIM™ open up new dimensions for the generation of I/Q signals. The R&S®AMIQ is a dual-channel modulation generator that has consequently been designed for use as an I/Q source. It is programmed and set with the Software R&S®WinIQSIM™.

  • R&S®AMIQ-B1 BER measurement

    Please contact us.Overview Key FactsOption R&S® AMIQ-B1 allows the signal decoded by the DUT to be analysed. To do so the waveform memory is filled with a data sequence with PRBS data. The data are decoded by the DUT and forwarded to the R&S® AMIQ as clock and data signals. R&S® AMIQ synchronizes to the known PRBS sequence and counts the bit errors.

  • R&S®AMIQ-B3 Digital output

    For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsThe digital I/Q output option supplies the up to 16-bit data bus for both channels I and Q at a 68-pin front-panel connector on the R&S® AMIQ basic unit. The associated bit clock is supplied in addition.

  • R&S®AMIQ-K15 OFDM Signal Generation

    An activation key is needed to transfer the WinIQSIM™ data into the AMIQ For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsSoftware option for interpreting a waveform file generated in R&S® WinIQOFDM with the aid of R&S® WinIQSIM™ Vers. 3.40.

  • R&S®AMIQ-B2 Differential I/Q outputs

    Key FactsThe option AMIQ-B2 provides the inverted outputs for I and Q in addition to the I/Q outputs of the standard AMIQ. The differential outputs are useful for tests of components with differential inputs.For single carrier systems there are no options required to transfer the data to the AMIQ.

  • R&S®AMIQ-K12 Digital Standard CDMA 2000

    An activation key is needed to transfer the WinIQSIM™ data into the AMIQ For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsSoftware option for interpreting a waveform file generated in R&S® WinIQSIM™ vers. 3.20 according to CDMA 2000.

  • R&S®AMIQ-K14 Digital Standard TD-SCDMA

    An activation key is needed to transfer the WinIQSIM™ data into the AMIQ For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsTD-SCDMA (time-division synchronous CDMA) designates a mobile-radio transmission method developed by the China Wireless Telecommunication Standard Group (CWTS, http://www.cwts.org).

  • AMIQ-K2 - Program for Transferring Various I/Q Formated Data to AMIQ

    The I/Q-Modulation Generator AMIQ provides high precision I/Q analog output for data calculated by the software WinIQSIM. Additionally, the software AMIQ-K2 enables you to read, convert, and transfer existing data files from various other programs to AMIQ format. Input formats supported by AMIQ-K2 are: - The propriety R&S programs IQSIM and DAB-K1. - Mathematic calculation programs like Matlab and Mathcad. - AWG202, COSSAP and ADS data files. AMIQ-K2 also provides you with remote control for AMIQ. For hardware and software requirements see section 2. AMIQ-K2 transfers data to AMIQ using either - GPIB - RS232. An extensive manual is supplied to help you use AMIQ-K2.

  • R&S®AMIQ-K11 Digital Standard IS-95 CDMA

    An activation key is needed to transfer the WinIQSIM™ data into the AMIQ For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsSoftware option for interpreting a waveform file generated according to IS95 by WinIQSIM™, version 2.10 or higher.

  • R&S®AMIQ-B19 I/Q Rear Panel Connection

    For single carrier systems there are no options required to transfer the data to the AMIQ. Key FactsThis option can be fitted only if option Differential Outputs (R&S® AMIQ-B2) is not installed.

Results 1 - 10 of 429
Previous  1  2  3  4  5  6  7  8  9  10  Next
Thank you.

Your request was successfully sent!

We will get in touch with you soon.

Your Rohde & Schwarz Team

Download

Please enter your first name.

Please enter a valid email address.

Please enter your name.

Please enter your company name.

Please enter your location.

Marketing permission
Please enter the characters shown in the image
show captcha

The input was not correct.
Content types Download types
International Website