70 Results
R&S®RTP-K101: Compliance test for USB 3.2 Gen 1&2 - Fact Sheet Brochures and Data Sheets
External frontends (FEs) extend the frequency range of the R&S®RTP high-performance oscilloscope. The basic functionality of an FE is similar to a spectrum analyzer. Depending on the selected radio frequency (RF), an intermediate frequency (IF) is transmitted to the oscilloscope. These frequencies are typically centered roughly at 5 GHz or 10 GHz.
R&S®RTP 오실로스코프는 진보된 사용자 인터페이스와 대형 스크린을 제공하는 고성능 오실로스코프입니다. 초소형 제품 크기와 우수한 성능, 사용자의 필요에 맞춰 활용 가능한 유연성을 동시에 지원합니다. R&S®RTP 오실로스코프는 실시간 신호 무결성을 분석하기 위한 최적의 솔루션입니다.
The R&S®RTP oscilloscope has an enhanced user interface and a large screen for the outstanding performance and flexibility you expect, combined with a very small footprint. This is perfect for signal integrity analysis in real time.
R&S®RTP high-perfomance oscilloscope - Fact sheet Brochures and Data Sheets
R&S®RTP-B High-Performance Oscilloscope - Specifications Brochures and Data Sheets Specifications
RTO / RTP Firmware Update from an older Version
RTO/RTP Setup of Reference Levels for Measurements in Firmware Version 5
At startup of RTE/RTO/RTP Windows asks for user and password. How can I get back the autologon function?
RTE/RTO/RTP - Loading a settings file with Labview drivers
RTE/RTO/RTP - export of the history into one file with remote commands
Scaling of frequency measurements RTE, RTO, RTP in cycles/min
RTE/RTO/RTP: Measurement of the level at a designated frequency in FFT with remote commands.
Connection of R&S ScopeSuite to RTO/RTP fails
RTE/RTO/RTP-B6: Output of a single waveform in single mode with remote commands RTE/RTO/RTP-B6 single waveform RTE/RTO/RTP-B6: Output of a single waveform in single mode with remote commands RTE/RTO/RTP-B6 single waveform Related Products
Learn about how Rohde & Schwarz and Eurofins Digital Testing bring advanced testing kit to high speed interface compliance test programs.
Is it possible to do math operations on a measurement? For example measure the frequency but display the result as cycles per minute?
When I use the zoom function to look at the rising edge of a rectangle signal, I see ringing which is not real, see screenshot. What is the reason?
When an additional monitor is connected via the HDMI interface, the touch functionality is lost. How can I get the touch functionality back?
I am using the ultra segmentation mode to minimize the blind time. But this is not indicated. Is there a way to calculate it?
The SCPI sequence for configuration and data query for the I/Q software interface option K11.
The Zoom function does not show any waveform data at specific settings, especially at slower timebases in combination with higher sample rates, High resolution and roll mode with more channels. The problem is gone if a lower sample rate is chosen.
A sinus signal with i.e. 10 V peak-peak, frequency 1 MHz is applied. If I choose a vertical scale which is too small the peaks of the waveform are not displayed as they are out of range. Now I activate the digital filter in the “Vertical” menu à “Channel”. The frequency of the filter is also set to 1 MHz. Now even at very small vertical scales (i.e. 50 mV/div) the waveform is displayed completely, see screenshot. But the amplitude can not be correct. What goes wrong here?
Volume Adjustment of the "BEEP"
FAQ - Decoding of SENT protocoll shows CRC errors