89 Results
04-Jan-2018
Rohde & Schwarz offers independently certified eCall test solutionThe market-leading eCall test solution from Rohde & Schwarz is the first of its kind to be certified by an independent test body. CETECOM has examined the implementation of the eCall test public safety answering point (PSAP) in the Rohde & Schwarz solution for the pan-European emergency call system and certified it as compliant with the CEN EN 16454:2015 standard.
Rohde & Schwarz Quick Start Guide for the R&S®SMBV100A vector signal generator, with basic information on the initial operation and the functions of the generator.
27-Feb-2023
Rohde & Schwarz verifies NTN capabilities of Bullitt’s smartphone, powered by MediaTek 3GPP Rel.17 chipsetRohde & Schwarz has partnered with Bullitt and MediaTek to fully test and verify the world’s first satellite-to-mobile messaging 5G smartphone in line with 3GPP Release 17. The groundbreaking test solution from Rohde & Schwarz verifies that SOS messaging and two-way messaging work reliably in no-coverage scenarios via non-terrestrial networks (NTN) in line with 3GPP. At MWC Barcelona, a test setup is showcased at the Rohde & Schwarz booth featuring a rugged 5G smartphone from Bullitt with integrated MediaTek 3GPP NTN Rel.17 chipset as DUT.
Rohde & Schwarz Operating Manual for the R&S®SMBV100A vector signal generator including hardware options.
Rohde & Schwarz Operating Manual for the GBAS Satellite Navigation application of the signal generator R&S®SMW200A; options R&S®SMW-K111.
Rohde & Schwarz User Manual for the HIL application of the signal generator R&S®SMW200A; option R&S®SMW-K109.
his application note briefly describes the technology behind ERA-GLONASS and presents conformance tests for ERAGLONASS using the R&S®CMW500 RF tester and the R&S®SMBV100A vector signal generator.
24-Jan-2018 | AN-No. 1MA251
Rohde & Schwarz Operating Manual for the Avionics (GBAS, VOR, ILS, DME) application of the R&S®SMBV100A, options R&S®SMBV-K111/-K151/-K152/-K153.
Taking helicopter flight safety to the next level - Case Study
The combination of the R&S®CMW500 mobile network simulator and the R&S®SMBV100B GNSS simulator with the Vector CANoe .Car2x software tool enables automotive engineers to simulate and test complex C-V2X scenarios in the lab.
A signal generator then creates the GNSS signal. Scenario editor software enables the user to define complex environments. The test system is capable of emulating a wide range of complex traffic and RF environments; not only ideal conditions but also challenging ones.
Watch the video Rohde & Schwarz presents the evolution of the C-V2X test framework consisting of the R&S®CMW500 network emulator and the R&S®SMBV100B GNSS signal generator in combination with Vectors CANoe .car2x and Dyna4, a virtual test drive tool.
24-Feb-2021
Rohde & Schwarz demonstrates its test solutions for the entire mobile ecosystem live at MWC Shanghai 2021In times when many trade shows and congresses are cancelled, postponed or have shifted to virtual formats, MWC Shanghai 2021 is the first show of the GSMA MWC series to return as a physical event in February 2021. Test and measurement specialist Rohde & Schwarz participates and demonstrates its market-leading solutions for mobile devices, chipsets, infrastructure and networks live at the Shanghai New International Expo Center (SNIEC).
09-Jun-2022
Rohde & Schwarz highlights its future-oriented ADAS test solutions at Automotive Testing Expo Europe 2022At Automotive Testing Expo Europe 2022 in Stuttgart, Rohde & Schwarz will demonstrate a wide range of advanced test solutions that support automotive applications. In the focus of the company at the show will be C-V2X, GNSS and automotive radar solutions which pave the way for the realization of advanced driver assistance systems (ADAS). Another important topics are connectivity test solutions for Automotive Ethernet, 5G and UWB.
07-Jun-2022
Rohde & Schwarz launches integrated high-performance antenna system for single-channel direction findersToday, Rohde & Schwarz announced the launch of the high-performance R&S ADD597 direction finding and monitoring antenna system. It is a key element in fixed, mobile and transportable spectrum monitoring stations. Combined with a single-channel direction finder, R&S ADD597 delivers reliable measurement results even in dense spectrum environments. It covers the frequency range from 20 MHz to 8.5 GHz (vertical polarization) and 20 MHz to 7.5 GHz (horizontal polarization).
07-Mar-2023
Airspace World 2023: Rohde & Schwarz launches drone based analyzer for efficient ATC air navigation signal inspectionAirspace World 2023: Rohde & Schwarz launches drone based analyzer for efficient ATC air navigation signal inspection
This application Note is based on CMW500, SMBV100B and Vector CANoe.Car2x Software and guides to how to simulate the specific Cellular Vehicle-to-Everything (C-V2X) wireless environment in respect to road transport scenarios and transmitted messages around the Device Under Test (DUT) like a Telematics Control Unit (TCU). It shows how to verify and validate the C-V2X application of the DUT in laboratory environment. The virtual simulation scenario is not limited to the requirements of CSAE53-2017 specification, and it could be modified by user according to this operating guide with CANoe.Vehicle-to-everything (V2X) is a new generation of information and communications technologies that connect vehicles to everything. The objective of V2X is to increase road safety and manage traffic efficiently.C-V2X is designed to offer low-latency vehicle-to-vehicle (V2V), vehicle-to-roadside infrastructure (V2I) and vehicle-to-pedestrian (V2P) communications services to add a new dimension to future advanced driver assistance systems (ADAS). C-V2X as one communications standard defined by 3GPP in Release 14 uses LTE technology as the physical interface for communications. The standard describes two types of communications. The vehicle-to-network (V2N) communications type, exploits the cellular Uu interface, uses traditional cellular link to enable cloud services to be integrated into end-to-end solutions, e.g. to allow road and traffic information for a given area to be distributed to the vehicles.The second type is referred to as direct or PC5/Sidelink (V2V, V2I, V2P) communications, where data transmission takes place over the PC5 interface. In that type, C-V2X does not necessarily require a cellular network infrastructure. It can operate without a SIM and without network assistance and uses GNSS as its primary source for time synchronization.Verifying system functionality and performance exclusively by field testing in a real-world environment can be time-consuming, costly and very challenging. Requirements regarding functionality, and consequently the required assistance functions, are constantly changing. Due to this fact, test solutions are needed during the development and introduction phase to verify compliance with the standards. The PC5 direct communications type allows exchange of time sensitive and safety relevant information. Using a mobile communication tester like the R&S® CMW500 together with a C-V2X scenario simulation tool delivers reproducible test scenarios. This is essential for the standardization of verification processes for C-V2X in order to obtain reliable and comparable results, and it helps to demonstrate that end-to-end functionality between two C-V2X devices from different vendors works properly.
02-Jun-2021 | AN-No. GFM341
20-Jan-2021
AVL and Rohde & Schwarz announce strategic Vehicle-in-the-Loop collaborationRohde & Schwarz and AVL have intensified their collaboration with the integration of a Rohde & Schwarz radar test system into the AVL DRIVINGCUBEtoolchain.
13-Oct-2020
Rohde & Schwarz propels 5G LBS with Assisted-GPS and 5G NR FR2 mmW performance testingAs wireless network operators roll out 5G NR in the millimeter wave spectrum, it is critical to ensure continued reliability of E911 calls and accurate determination of location in mobile devices.
08-Jul-2021
Element adds 5G VoNR testing capability with solutions from Rohde & SchwarzVoice over New Radio (VoNR) delivers voice services to 5G and plays a critical role to the long-term success of 5G deployments and replacement of legacy technologies.
01-Dec-2021
From the lab to the proving ground: Rohde & Schwarz and Audi cooperate on Cellular-V2X road traffic scenario testingRohde & Schwarz and Audi partner to enable Cellular-V2X (C-V2X) application testing; creating road traffic scenarios in the laboratory and using the same traffic scenarios to conduct end-to-end testing on the Audi proving ground with an R&S CMW500 wideband radio communication tester.
22-Jul-2020
Rohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectorsRohde & Schwarz presents economy vector signal generator for the automotive, IoT and education sectors.
24-Jan-2022
Rohde & Schwarz first to deliver test sequences to fulfill requirements of E112 emergency caller locationA new regulation requires all smartphones sold in the European Union from March 2022 onwards to support caller location for 112 emergency calls. To ensure this feature, the devices must be compliant with several positioning systems as outlined by the European Commission. Rohde & Schwarz announces an extension to its R&S TS-LBS location based services test system, making it the first test solution available to perform the necessary LBS compliance tests. Certification service provider CETECOM has already started first E112 testing using these test sequences
02-Jan-2024
CES 2024: Rohde & Schwarz showcases leading edge test solutions for automotive radar object simulation and wireless battery management systemsCES 2024: Rohde & Schwarz showcases leading edge test solutions for automotive radar object simulation and wireless battery management systems
01-Oct-2020
CATARC (Tianjin) Automotive Engineering Research Institute Co.,Ltd. selects Rohde & Schwarz to supply full vehicle antenna test (FVAT) systemCATARC (Tianjin) Automotive Engineering Research Institute Co.,Ltd. has selected leading global test and measurement supplier Rohde & Schwarz to supply a full vehicle antenna test (FVAT) system and support services. The system is required to optimize the performance and location of antenna modules, verify compliance with wireless and EMC standards and ensure proper operation of a vehicle’s wireless system. These aspects are essential for the development of emerging technologies such as autonomous driving.
15-Sep-2022
Unique features increase test efficiency and flexibility of R&S ATS1500C automotive radar test chamber from Rohde & SchwarzThe R&S ATS1500C antenna test system from Rohde & Schwarz offers a new temperature test option and a new feed antenna. These additional features enable temperature-controlled measurements in a wide temperature range as well as parallel access to both polarizations, increasing test efficiency and flexibility. The solution will be shown at EuMW from September 27 to 29, 2022 at booth D18 of the Milano Convention Centre.
04-Nov-2021
Rohde & Schwarz updates economy VNA portfolio with models up to 20 GHz and independant CW sources for low frequency modelsRohde & Schwarz launched four new R&S ZNL and R&S ZNLE vector network analyzers that can support up to 20 GHz of operation frequency. The economy VNAs now have the frequency range necessary to investigate even third harmonics for 5 GHz and 6 GHz band technologies, such as wireless LAN or mobile radio. The latest firmware release also includes a brand-new option that provides lower frequency R&S ZNL models with an internal CW signal generator.
25-Jan-2023
Test. Measure. Innovate – Rohde & Schwarz showcases unique mobile test solutions at MWC Barcelona 2023Rohde & Schwarz exhibits at the Mobile World Congress 2023 in Barcelona under the motto “Test. Measure. Innovate.” its exciting and innovative portfolio of mobile and wireless communications testing solutions.