R&S®ZNH handheld vector network analyzer

Low in complexity, high in precision

R&S®ZNH full two-port handheld vector network analyzer
Open Lightbox
R&S® ZNH Front view
Open Lightbox
R&S® ZNH Front and side view
Open Lightbox
R&S® ZNH Front and side view
Open Lightbox
R&S® ZNH Rear view
Open Lightbox
R&S® ZNH measuring a bandpass filter
Open Lightbox
R&S® ZNH calibration with cable
Open Lightbox
R&S® ZNH calibration
Open Lightbox
R&S® ZNH with R&S®ZN-Z103
Open Lightbox
R&S® ZNH with R&S®ZN-Z103, top view
Open Lightbox
R&S® ZNH with R&S®NRP18S
Open Lightbox
R&S®ZNH full two-port handheld vector network analyzer R&S® ZNH Front view R&S® ZNH Front and side view R&S® ZNH Front and side view R&S® ZNH Rear view R&S® ZNH measuring a bandpass filter R&S® ZNH calibration with cable R&S® ZNH calibration R&S® ZNH with R&S®ZN-Z103 R&S® ZNH with R&S®ZN-Z103, top view R&S® ZNH with R&S®NRP18S

Key facts

  • Frequency range from 30 kHz to 4/8/18/26.5 GHz
  • One-port cable and antenna measurement with basic instrument
  • S-parameter (S11, S12, S21, S22) measurement with basic instrument
  • 100 dB (typ.) dynamic range for filter and antenna isolation measurements
  • Non-reflective display, small form factor, ruggedized housing (IP51)

Commençant à CHF 13'200

  • R&S signal & spectrum analyzer | 3 years warranty extension

Lightweight design, heavyweight performance

R&S®ZNH is a full two-port handheld vector network analyzer that offers one-port cable and antenna measurement and full two-port S-parameter measurements. The touch based interface is simple to operate and a configuration overview menu makes measurement preparation more efficient. The R&S®ZNH may have a small form factor but it is complete in every detail and delivers high performance and all the key functionalities.

Caractéristiques & avantages

Four receiver architecture

Sophisticated RF architecture provides access to latest calibration types

The four-receiver architecture consists of dedicated reference receivers and test receivers at both port 1 and port 2. This allows R&S®ZNH to support more advanced calibration types such as unknown through, open, short and match (UOSM) calibration. This calibration is useful for DUTs with different input or output connector types at the test ports.

R&S®ZNH
Open Lightbox

Four-receiver architecture

Minimal switching between the two ports and sophisticated calibration such as UOSM

Compact powerhouse

Outstanding RF performance in a small form factor

The portability and small footprint of the R&S®ZNH make it ideal for field measurements.

The R&S®ZNH also delivers high performance with the following features:

  • Wide frequency range of 30 kHz to 4/8/18/26.5 GHz to support a wide range of applications
  • High dynamic range of up to 100 dB (typ.) to measure large level variations
  • Highly accurate thanks to a low trace noise magnitude (RMS) of 0.0015 dB to 0.0040 dB (typ.) and a low trace noise phase (RMS) of 0.02° to 0.04° (typ.)
  • Built-in receiver step attenuator at both ports, which is adjustable in 5 dB steps from 0 dB to 15 dB
R&S®ZNH
Open Lightbox

Receiver step attenuator

Increases the linearity of the port input power range, which protects the analyzer against overloading.

Simple to operate

Multi-touch screen, remote control and measurement wizard for a top user experience

The multi-touch screen offers the standard pinch-to-zoom function available on smartphones. The R&S®ZNH supports typical phone control gestures, helping users feel at home. Even if operators cannot access the instrument directly, free PC, Android and iOS remote control apps are available for seamless operation. Furthermore, the measurement wizard helps simplify measurements with automated test sequences, speeding up the test process and reducing the potential for human error.

R&S®ZNH
Open Lightbox

Multi-touch function

Capacitive touchscreen; intuitive operation and no display calibration required.

Simple configuration

Simple and fast setup with configuration overview menu

The R&S®ZNH has both keys and a rotary knob as well as touchscreen controls. The keys are large and well spaced out, allowing easy operation when wearing gloves.

The capacitive touchscreen offers a new kind of user experience:

  • Directly interact with elements on the screen
  • Access menus quickly
  • Change frequency and span
  • Add/move/delete markers
  • And more


The configuration overview menu reduces the steps required to configure the measurement settings, enabling fast setup.

R&S®ZNH
Open Lightbox

Flexible calibration

User defined calibration sequences provide a flexible approach.

Simple to add value

Comprehensive standard features and simple option ordering

The R&S®ZNH basic unit includes:

  • Distance-to-fault measurements
  • One-port cable loss measurements
  • Reflection measurement
  • Transmission measurement
  • Four S-parameters (S11, S21, S12, S22)


When additional functions are needed, the options are easy to order. All the options can be ordered transparently and independently, meaning no hidden costs and no confusion when ordering.

R&S®ZNH
Open Lightbox

Quick setup of S-parameter display in desired format.

Four S-parameter measurements provided as standard.

Available models
Model name
Frequency Range
Number of ports
CAT functionality
S-parameter
RF connector
Starting at
R&S®ZNH4

Order number 1321.1611.04

Frequency Range
4 GHz
Number of ports
2
CAT functionality
standard
S-parameter
standard
RF connector
N
Starting at
R&S®ZNH8

Order number 1321.1611.08

Frequency Range
8 GHz
Number of ports
2
CAT functionality
standard
S-parameter
standard
RF connector
N
Starting at
R&S®ZNH18

Order number 1321.1611.18

Frequency Range
18 GHz
Number of ports
2
CAT functionality
standard
S-parameter
standard
RF connector
N
Starting at
R&S®ZNH26

Order number 1321.1611.26

Frequency Range
26.5 GHz
Number of ports
2
CAT functionality
standard
S-parameter
standard
RF connector
PC 3.5mm
Starting at

Available options

General analysis
Product
Description
ZNH-Handheld-vector-network-analyzer-K9.png
R&S®ZNH-K9

Order number 1334.6800.02

Description
Power sensor support
ZNH-Handheld-vector-network-analyzer-K10.png
R&S®ZNH-K10

Order number 1334.6846.02

Description
DC bias variable voltage source
ZNH-Handheld-vector-network-analyzer-K29.png
R&S®ZNH-K29

Order number 1334.6823.02

Description
Pulse measurements with power sensor
ZNH-Handheld-vector-network-analyzer-K45.png
R&S®ZNH-K45

Order number 1334.6852.02

Description
Vector voltmeter
ZNH-Handheld-vector-network-analyzer-K66.png
R&S®ZNH-K66

Order number 1334.6869.02

Description
Wave ratios wave quantities
Calibration kits
Product
Description
R&S®ZCAN

Order number 0800.8515.52

Description
Calibration Kit, 0 Hz to 3 GHz, N, 50 Ω
R&S®ZCAN

Order number 0800.8515.72

Description
Calibration Kit, 0 Hz to 3 GHz, N, 75 Ω
FSH-Z28_front.jpg
R&S®FSH-Z28

Order number 1300.7810.02

Description
Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 8 GHz for R&S®FSH
FSH-Z29 - calibration
R&S®FSH-Z29

Order number 1300.7510.03

Description
Combined Open/Short/50 Ω Load Calibration Standard, for calibrating the VSWR and DTF measurement
DC to 3.6 GHz forR&S®FSH4/R&S®FSH8
Calibration units
Product
Description
ZN-Z103 Calibration Unit
R&S®ZN-Z103

Order number 1321.1828.02

Description
Calibration unit, 1 port, N (f), 2 MHz to 4 GHz
R&S®ZN-Z103

Order number 1321.1828.12

Description
Calibration unit, 1 port, N (f), 1 MHz to 6 GHz
R&S®ZN-Z170

Order number 1328.8163.02

Description
Calibration Kit, 0 Hz to 18 GHz, N (m), 50 Ω
R&S®ZN-Z170

Order number 1328.8163.03

Description
Calibration Kit, 0 Hz to 18 GHz, N (f), 50 Ω
R&S®ZN-Z135

Order number 1328.8157.02

Description
Calibration Kit, 0 Hz to 26.5 GHz, 3.5 mm (m), 50 Ω
R&S®ZN-Z135

Order number 1328.8157.03

Description
Calibration Kit, 0 Hz to 26.5 GHz, 3.5 mm (f), 50 Ω
Test cables
Product
Description
ZV-Z93_front.jpg
R&S®ZV-Z93

Order number 1301.7595.25

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 635 mm (25 in)
ZV-Z93_front.jpg
R&S®ZV-Z93

Order number 1301.7595.38

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 965 mm (38 in)
R&S®ZV-Z95

Order number 1301.7608.25

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 635 mm (25 in)
R&S®ZV-Z95

Order number 1301.7608.38

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 965 mm (38 in)
R&S®ZV-Z191

Order number 1306.4507.24

Description
Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 610 mm (24 in)

Order number 1306.4507.36

Description
Test port cable, 0 Hz to 18 GHz, N (m) - N (m), length 914 mm (36 in)

Order number 1306.4513.24

Description
Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 610 mm (24 in)

Order number 1306.4513.36

Description
Test port cable, 0 Hz to 18 GHz, N (m) - 3.5 mm (m), length 914 mm (36 in)
ZV-Z193 Test port cable

Order number 1306.4520.24

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 610 mm (24 in)
ZV-Z193 Test port cable

Order number 1306.4520.36

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 914 mm (36 in)
ZV-Z193 Test port cable

Order number 1306.4520.60

Description
Test port cable, 0 Hz to 26.5 GHz, 3.5 mm (f) – 3.5 mm (m), length: 1524 mm (60 in)

Order number 1306.4536.24

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) – 2.92 mm (m), length: 610 mm (24 in)

Order number 1306.4536.36

Description
Test port cable, 0 Hz to 40 GHz, 2.92 mm (f) - 2.92 mm (m), length 914 mm (36 in)
Recommended extras
Product
Description
R&S®FSH-Z320

Order number 1309.6600.00

Description
RF cable (length: 1 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option
R&S®FSH-Z321

Order number 1309.6617.00

Description
RF cable (length: 3 m), DC to 8 GHz, armored, N male/N female connectors
for R&S®FSH-K41 option

Order number 1035.1700.52

Description
High-Power Attenuator, 50 W
0 Hz to 6 GHz, 20 dB
R&S®RBU100

Order number 1073.8495.03 (3 dB) / 1073.8495.06 (6 dB) / 1073.8495.10 (10 dB) / 1073.8495.20 (20 dB) / 1073.8495.30 (30 dB)

Description
High-Power Attenuator, 100 W
0 Hz to 2 GHz
HA-Z340 GPS receiver
R&S®HA-Z340

Order number 1321.1392.02

Description
GPS Receiver for R&S®Spectrum Rider
RAM_front.jpg
R&S®RAM

Order number 0358.5414.02

Description
Matching pad, 75 Ω, L section
bidirectional, 0 Hz to 2.7 GHz, N (f)/N (m) connectors, load capacity 2 W, L section
RAZ_front.jpg
R&S®RAZ

Order number 0358.5714.02

Description
Matching pad, 75 Ω, series resistor 25 Ω
0 Hz to 2.7 GHz
R&S®FSH-Z38

Order number 1300.7740.02

Description
Matching pad 50/75 Ω, L section, N to BNC
bidirectional, 0 Hz to 1 GHz, BNC female/N male connectors, load capacity 1 W
R&S®Adapter BNC N

Order number 0118.2812.00

Description
N - BNC Adapter (N male - BNC female)
R&S®Adapter N

Order number 0092.6581.00

Description
N - Adapter (N male - N male)
R&S®Adapter SMA N

Order number 4012.5837.00

Description
N- Adapter (N male - SMA female)
R&S®Adapter N1 6 F

Order number 3530.6646.00

Description
N - Adapter (N male - 7/16 female)
R&S®Adapter N 16 M

Order number 3530.6630.00

Description
N - Adapter (N male - 7/16 male)
R&S®Adapter N FME F

Order number 4048.9790.00

Description
N - Adapter (N male - FME female)
R&S®Adapter N BNC M

Order number 0017.6742.00

Description
N - BNC Adapter (BNC male - banana female)
HA-Z303 Battery Charger
R&S®HA-Z303

Order number 1321.1328.02

Description
Battery charger for R&S®HA-Z306
The battery charger is to be used for charging an additional battery outside the instrument. The internal battery is charged by the instrument itself.
HA-Z306 Lithium Ion Battery Pack
R&S®HA-Z306

Order number 1321.1334.02

Description
Lithium-ion battery pack, 6.4 Ah
HA-Z301-Spare-power-supply
R&S®HA-Z301

Order number 1321.1386.02

Description
Spare power supply, incl. mains plug for EU, UK, US, AUS, CH
HA-Z302 Car Adapter for cigarette lighter
R&S®HA-Z302

Order number 1321.1340.02

Description
Car adapter for cigarette lighter
The car adapter is suitable for both the instrument and the R&S®HA-Z303 external battery charger.
HA-Z322 Carrying holster
R&S®HA-Z322

Order number 1321.1370.02

Description
Carrying holster
HA-Z322 Rainproof carrying holster
R&S®HA-Z322

Order number 1321.1370.03

Description
Rainproof carrying holster
HA-Z220 Carrying Bag
R&S®HA-Z220

Order number 1309.6175.00

Description
Carrying bag
soft carrying bag
HA-Z321 Hard case
R&S®HA-Z321

Order number 1321.1357.02

Description
Hard Case for R&S®Spectrum Rider
RTH-Z4 Hard Shell Protective Carrying Case
R&S®RTH-Z4

Order number 1326.2774.02

Description
Hard shell protective carrying case
Dimensions: 455 mm x 368 mm x 166 mm. Weight: 2.5 kg.
HA-Z211 Spare USB cable
R&S®HA-Z211

Order number 1309.6169.00

Description
Spare USB cable
HA-Z210 Spare Ethernet cable
R&S®HA-Z210

Order number 1309.6152.00

Description
Spare LAN cable
Power sensors
Product
Description
FSH-Z14_front.jpg

Order number 1120.6001.02

Description
Directional power sensor
25 MHz to 1 GHz
FSH-Z44_front.jpg

Order number 1165.2305.02

Description
Directional power sensor
200 MHz to 4 GHz
NRPZ211_front.jpg

Order number 1417.0409.02 / 1417.0409.04

Description
Two-Path diode power sensors
Universal power sensor, 10 MHz to 8 GHz, 100 mW, two-path
NRPZ221_front.jpg

Order number 1417.0309.02

Description
Two-Path Diode Power Sensors
Universal power sensor, 10 MHz to 18 GHz, 100 mW, two-path
NRP8S_img.jpg

Order number 1419.0006.02

Description
Three-path diode power sensor
For USB operation
NRP18S_front.jpg

Order number 1419.0029.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP33S_front.jpg

Order number 1419.0064.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP40S_img.jpg

Order number 1419.0041.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP50S_img.jpg

Order number 1419.0087.02

Description
Three-Path Diode Power Sensor
For USB operation
NRP18T_Thermal_power_sensor_img1.jpg
R&S®NRP18T

Order number 1424.6115.02

Description
Thermal power sensor
300 nW to 100 mW, DC to 18 GHz
NRP33T_Thermal_power_sensor_img1.jpg
R&S®NRP33T

Order number 1424.6138.02

Description
Thermal Power Sensor
300 nW to 100 mW, DC to 33 GHz
NRP40T_Thermal_power_sensor_img1.jpg
R&S®NRP40T

Order number 1424.6150.02

Description
Thermal Power Sensor
300 nW to 100 mW, DC to 40 GHz
NRP50T_Thermal_power_sensor_img1.jpg
R&S®NRP50T

Order number 1424.6173.02

Description
Thermal Power Sensor
NRP67T_Thermal_power_sensor_img1.jpg
R&S®NRP67T

Order number 1424.6196.02

Description
Thermal Power Sensor
R&S®NRP90T

Order number 1424.6473.02

Description
Thermal Power Sensor
NRP110T_Thermal_power_sensor_img1.jpg
R&S®NRP110T

Order number 1424.6215.02

Description
Thermal Power Sensor
NRP6A_Average_power_sensors_img1.jpg

Order number 1424.6796.02

Description
Average Power Sensor
100 pW to 200 mW, 8 kHz to 6 GHz
NRP18A_Average_power_sensors_img1.jpg

Order number 1424.6815.02

Description
Average Power Sensor
100 pW to 200 mW, 8 kHz to 18 GHz
Wideband power sensors
Product
Description
NRPZ81_front.jpg

Order number 1137.9009.02

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ85_front.jpg

Order number 1411.7501.02

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ86_front.jpg

Order number 1417.0109.40

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
NRPZ86var44_front.jpg

Order number 1417.0109.44

Description
Wideband Power Sensor
Time domain analysis and automatic pulse analysis for radar applications and universal use
Power sensors & adapter cables
Product
Description
FSH-Z144 USB adapter cable
R&S®FSH-Z144

Order number 1145.5909.02

Description
USB adapter cable
for R&S®FSH-Z14/R&S®FSH-Z44 power sensors

Order number 1146.8001.02 / 1146.8001.04 / 1146.8001.06 / 1146.8001.11

Description
USB Adapter (passive)
For all R&S®NRP-Z sensors. The R&S®NRPZ4 passive USB adapter provides all basic functions, as it handles the transmission of settings and measurement data as well as the power supply of the sensor via the USB bus. Available cable lengths: Available cable lengths: 2.0m, 0.5m and 0.15m Available cable length for panel-mount: 1m
NRP-ZKU USB interface cable
R&S®NRP-ZKU

Order number 1419.0658.03

Description
USB interface cable, length: 1.5 m
Optical power sensor and accessories
Product
Description
HA-Z360-OEM-USB-Optical-Power-Meter
R&S®HA-Z360

Order number 1334.5162.00

Description
OEM USB Optical Power Meter (Germanium)
HA-Z361-OEM-USB-Optical-Power-Meter
R&S®HA-Z361

Order number 1334.5179.00

Description
OEM USB Optical Power Meter (filtered InGaAs)
HA-Z362-SC-Adapter
R&S®HA-Z362

Order number 1334.5185.00

Description
SC Adapter for Optical Power Meter
HA-Z363-LC-Adapter
R&S®HA-Z363

Order number 1334.5191.00

Description
LC Adapter for Optical Power Meter
HA-Z364-2.5-mm-Universal-Adapter
R&S®HA-Z364

Order number 1334.5204.00

Description
2.5 mm Universal Adapter for Optical Power Meter
HA-Z365 Universal adapter for optical power meter
R&S®HA-Z365

Order number 1334.5210.00

Description
1.25 mm Universal Adapter for Optical Power Meter
HA-Z366-Patch-Cord
R&S®HA-Z366

Order number 1334.5227.00

Description
Patch Cord SC-LC SM, SX, length: 1 m
HA-Z367 Patch Cord
R&S®HA-Z367

Order number 1334.5233.00

Description
Patch Cord SC-SC SM, SX, length: 1 m

Further information

Spectrum & Vector network analyzers promotion

Widest variety of fully equipped products up to 48% off, now until March 31st, 2021

More information

Mobile network testing

Mobile network testing solutions from Rohde & Schwarz let you reconcile your current and future dilemmas.

More information

Teaching-Software for Multi-User Student Labs

The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.

More information

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Je souhaite recevoir des informations de Rohde & Schwarz via

Marketing de permission

Qu'est ce que cela signifie en détail ?

Je reconnais que les entités ROHDE & SCHWARZ GmbH & Co. KG et ROHDE & SCHWARZ ou toute autre société subsidiaire mentionnée au sein de ce site Internet, peuvent me contacter par le moyen de leur choix (email ou courrier) pour des raisons marketing et publicitaires (par exemple pour des informations sur des offres spéciales et des promotions) en relation avec, mais pas uniquement, des produits et des solutions dans les domaines du test et mesure, des communications sécurisées, de la surveillance et test des réseaux, des broadcasts et médias, ainsi que de cybersécurité.

Vos droits

Cette déclaration de consentement peut être révoquée à tout moment par l'envoi d'un courriel portant, dans son objet, la mention "Unsubscribe" (désinscription) à news@rohde-schwarz.com. En outre, chaque courriel envoyé contient un lien vers une fonction de désinscription de publicités ultérieures adressées par courrier électronique. La "Déclaration de confidentialité" expose plus en détail l'utilisation des données personnelles, ainsi que la procédure de révocation de consentement.

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.