Logiciel pour oscilloscopes Rohde & Schwarz

Logiciel pour oscilloscopes Rohde & Schwarz

Choisissez parmi une large gamme d'options d'applications dédiées à l'analyse avancée et au débogage puissant

Augmentez les capacités d'analyse de votre oscilloscope avec des options d'applications dédiées aux déclenchements et décodages de protocoles, aux tests de conformité automatisés pour la plupart des interfaces standards, aux analyses générales telles que la gigue ou la puissance et aux analyses de signaux vectoriels.

Kits de déclenchement & décodage
Product Name
Min. bandwidth
Description
Min. bandwidth
50 / 50 / 500 MHz
Description
Trigger & decoding of ARINC 429/ MIL-1553 / SpaceWire data & communication buses. 
Min. bandwidth
600 MHz
Description
Triggering and decoding of 100BASE-T1/BroadR-Reach® and 1000BASE-T1 Automotive Ethernet
Min. bandwidth
50 MHz
Description
T&D package for automotive protocols such as CAN, CAN-FD, CAN-XL, LIN, FlexRay, SENT, CXPI
Min. bandwidth
600 MHz
Description
8b10b, Manchester and NRZ
Min. bandwidth
600 MHz
Description
Decoding software 10Base-T, 100Base-Tx and MDIO
Min. bandwidth
600 MHz
Description
Serial triggering and decoding: I2C/SPI/ RS-232/UART/I2S/LJ/ RJ/TDM/Manchester/NRZ
Min. bandwidth
4 GHz
Description
D-PHY ( DSI, CSI-2), M-PHY / UniPro
Min. bandwidth
1 GHz
Description
MIPI RFFE 
Min. bandwidth
6 GHz
Description
8b 10b, PCI Express 1.1/2.0/3.0
Min. bandwidth
2 GHz
Description
USB 1.1 / 2.0 / 3.2 Gen1/2 / HSIC/SSIC / Power Delivery (PD)
Déclenchement et décodage série
Product Name
Min. bandwidth
Description
Min. bandwidth
-
Description
Bus measurement for serial protocol decoding
Min. bandwidth
600 MHz
Description
Triggering and decoding of 100BASE-T1/BroadR-Reach® and 1000BASE-T1 Automotive Ethernet
Min. bandwidth
600 MHz
Description
Universal decoding of 8b10b buses
Min. bandwidth
50 MHz
Description
Triggering and decoding of ARINC 429 buses
Min. bandwidth
50 MHz
Description
Triggering and decoding of CAN and LIN interfaces
Min. bandwidth
50 MHz
Description
Triggering and decoding of CAN-FD
Min. bandwidth
50 MHz
Description
Triggering and decoding of clock extension peripheral interface (CXPI) buses in line with SAE J3076
Min. bandwidth
600 MHz
Description
Decoding of 10BASE-T and 100BASE-TX Ethernet
Min. bandwidth
50 MHz
Description
Triggering and decoding of FlexRay™ buses
Min. bandwidth
50 MHz
Description
Triggering and decoding of I²C and 2-wire, 3-wire or 4-wire SPI buses
Min. bandwidth
50 MHz
Description
Triggering and decoding of I²S buses
Min. bandwidth
200 MHz
Description
Triggering and decoding of any Manchester and NRZ coded serial protocol such as Profibus PA, DALI, MVB and many proprietary protocols
Min. bandwidth
200 MHz
Description
Triggering and decoding of MDIO
Min. bandwidth
50 MHz
Description
Triggering and decoding of MIL-STD-1553 buses
Min. bandwidth
4 GHz
Description
Triggering and decoding of the MIPI D-PHY based protocols DSI and CSI-2
Min. bandwidth
4 GHz
Description
Triggering and decoding of the MIPI M-PHY physical layer and the UniPro protocol layer
Min. bandwidth
1 GHz
Description
Triggering and decoding of the MIPI RFFE-protocol
Min. bandwidth
6 GHz
Description
Triggering and decoding of PCI Express Gen 1.1, 2.0 and 3.0 signals
Min. bandwidth
50 MHz
Description
Triggering and decoding of UART based protocols and RS-232, RS-422 and RS-485 buses
Min. bandwidth
50 MHz
Description
Triggering and decoding of fast channel and short and enhanced serial messages. Meets SENT SAE J2716 v2010 and legacy standard.
Min. bandwidth
500 MHz
Description
Triggering and decoding of SpaceWire data and communications buses.
Min. bandwidth
2 GHz
Description
Triggering and decoding of all USB 1.x/2.0 data rates: high speed (480 Mbit/s), full speed (12 Mbit/s) and low speed (1.5 Mbit/s)
Min. bandwidth
13 GHz
Description
Triggering and decoding of USB 3.1 Gen 1 and Gen 2 signals
Min. bandwidth
1 GHz
Description
Triggering and decoding of USB power delivery (USB-PD) signals
Min. bandwidth
2 GHz
Description
Triggering and decoding of USB-SSIC signals
Test de conformité
Product Name
Min. bandwidth
Description
Min. bandwidth
600 MHz
Description
Automated compliance test solution for 10/100/1000BASE-T Ethernet interfaces according to the IEEE test specification
Min. bandwidth
600 MHz
Description
Automated compliance test solution for 10/100/1000BASE-T Ethernet interfaces according to the IEEE test specification
Min. bandwidth
1 GHz
Description
Automated compliance test solution for 2.5G/5GBASE-T Ethernet interfaces in line with IEEE test specification
Min. bandwidth
3 GHz
Description
Automated compliance test solution for 10GBASE-T Ethernet interfaces according to the IEEE test specification.
Min. bandwidth
4 GHz
Min. bandwidth
600 MHz
Description
Automated compliance test solution for 10BASE-T1S and 10BASE-T1L Ethernet in line with IEEE 802.3cg specification
Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specifications
Min. bandwidth
2 GHz
Description
1000BASE-T1 Ethernet compliance test solution in line with IEEE 802.3bp specification
Min. bandwidth
2 GHz
Description
Automated compliance test solutions for DDR3 and DDR4
Min. bandwidth
1 GHz
Description
Automated compliance test solution for eMMC interfaces in line with JEDEC specification JESD84-B51 version 5.1, covering HS200 and HS400 bus speed modes
Min. bandwidth
4 GHz
Description
Automated compliance test solution for HDMI interfaces in line with HDMI forum 1.4b/2.1 (TMDS) test specifications
Min. bandwidth
4 MHz
Description
Automated compliance test solution for R&S®MIPI D-PHY in line with MIPI and UNH-IOL test specifications
Min. bandwidth
4 GHz
Description
Automated compliance test solution for R&S®MIPI D-PHY in line with MIPI and UNH-IOL test specifications
Min. bandwidth
6 GHz
Description
Automated compliance test solution for PCI Express interfaces (systems and cards) according to PCI-SIG compliance test specifications
Min. bandwidth
2 GHz
Min. bandwidth
-
Description
Fully automatic Ethernet compliance test for 100BASE-T, 100BASE-T1 and 1000BASE-T1 compliance
Min. bandwidth
13 GHz
Description
Automated compliance test solution for DisplayPort 1.4a and embedded DisplayPort 1.4b/1.5 (covering bit rate mode RBR, HBR, HBR2, HBR3)
Analyses générales
Product Name
Description
Description
Advanced eye analysis of acquired waveforms with 8/16 Gbps configurable HW-CDR
Description
Extends the trigger capabilities of the R&S®Scope Rider handheld oscilloscopes. Additional trigger types such as pattern, state, runt, slew rate, window, data2clock, serial pattern, timeout and interval or TV/video
Description
Clock data recovery of embedded clocks in realtime with the R&S®RTO oscilloscope
Description
Deembedding in realtime for fast results
Description
Frequency counter for R&S®Scope Rider handheld oscilloscopes
Description
The frequency response analysis option uses the built-in oscilloscope waveform generator to create stimulus signals ranging from 10 Hz to 25 MHz on RTx and 0.01 Hz to 100 MHz on the MXO.
Description
Displays up to 64 harmonics with the R&S®Scope Rider handheld oscilloscopes
Description
Increases the vertical resolution of the Rohde & Schwarz oscilloscopes to up to 16 bits
Description
Capture and analyze pulsed and bursted signals over a long period
Description
Analyze high-speed serial signals with the hardware based clock data recovery (CDR) up to 16 Gbps
Description
Jitter Measurements such as cycle-to-cycle jitter or time interval error (TIE); enabling track display
Description
Separation of individual jitter and noise components such as Random, Data Dependent or Periodic components; display of step response, histograms, synthetic eye diagrams, spectrum and BER-bathtub curves
Description
Analysis of switch mode and linear power supply characteristics with automated measurements and wizard support
Description
Enhances the powerful multichannel spectrum analysis capability of Rohde & Schwarz oscilloscopes, incl. spectrogram
Description
Trigger on user-defined zones. Zones can be applied to channels, math and FFT signals
Analyses de signaux vectoriels
Product Name
Description
Description
Converts modulated signals to I/Q data for further processing
Description
The R&S®VSE vector signal explorer software brings the experience and power of Rohde & Schwarz signal analysis to the oscilloscope, offering a wide range of analysis options for troubleshooting and optimizing your designs
Description
Integrated setup control for external R&S®FExx frontends
Logiciel d'analyse / contrôle à distance
Product Name
Description
Description
R&S®InstrumentView remote analysis for Rohde & Schwarz oscilloscopes: Download waveforms from your oscilloscope to your computer and use this software to analyze them in detail.
Description
The R&S®CDS campus dashboard software simplifies teaching of student groups in laboratories with multiple workbenches.
Description
Enables the R&S®Scope Rider's integrated wireless LAN module, allowing easy remote control of the  R&S®Scope Rider.
Description
Enables the control of the R&S®Scope Rider touch interface and keypad through the web browser of any notebook or tablet.(requires R&S®RTH-K200 or R&S®RTH-K200US option).
    0 de 3 Comparer les produits
    Sélectionner au moins 2 produits

    Request information

    Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

    Marketing de permission

    Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
    An error is occurred, please try it again later.
    Informations générales et conditions d'utilisation du site Web

    Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

    You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

    Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

    1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

    2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

    3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

    4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

    5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

    Prix : 1x oscilloscope numérique R&S®RTB2000

    6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

    7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

    8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

    9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

    10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

    11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

    12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

    13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

    * “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.