5G & cellular

Munich 03.03.2020

Rohde & Schwarz and MediaTek verify dynamic spectrum sharing (DSS) for 5G NR

Today, frequencies below 6 GHz are heavily utilized due to the successful deployment of 4G LTE. This creates a challenge for network operators worldwide on how to deploy 5G NR at these low frequency bands. Dynamic spectrum sharing (DSS) is a technique that enables mobile network operators to use LTE and 5G NR in the same frequency band. The in-depth validation of the standardized coexistence methodology is key to the success of this technology. Rohde & Schwarz and MediaTek have leveraged their unique expertises through a collaboration, with the resulting verification that uses the R&S CMX500 5G NR radio communication tester platform by Rohde & Schwarz and a device under test (DUT) provided by MediaTek.

The R&S CMX500 can test correct the implementation of DSS algorithms on LTE and 5G NR. (Image: Rohde & Schwarz)
The R&S CMX500 can test correct the implementation of DSS algorithms on LTE and 5G NR. (Image: Rohde & Schwarz)

Almost all initial 5G NR FR1 deployments are based on time division duplex (TDD), with unpaired frequency bands typically in the 3.5 GHz frequency range. However, about 90% of all spectrum below 6 GHz is organized as paired frequency bands, using frequency division duplex (FDD), where downlink and uplink use different frequencies. At the moment, these frequency bands are already in use by 4G LTE.

This is where DSS comes into play. It introduces smart algorithms and combines several other features that allow the simultaneous coexistence between 4G LTE and 5G NR users in a single mobile network, while using the same frequency band. In the LTE network, multicast broadcast single frequency network (MBSFN) is activated to allow 5G NR the transmission of synchronization signal blocks (SSB) and tracking reference signals (TRS). Depending on the amount of LTE and 5G NR users in a specific cell, DSS helps balance the LTE or 5G NR scheduling of mobile devices based on the actual traffic load. That allows the transmission of 5G data in standard LTE subframes, while specific rate-matching techniques are applied that avoid e.g. the always-present LTE cell-specific reference signals (CRS).

The combination of these features, functions and complex algorithms requires extensive testing of mobile devices. DSS will complement the 5G NR signalling tester feature coverage of Rohde & Schwarz by using the R&S CMX500 5G NR signalling tester together with the company’s tried-and-tested, industry-leading LTE testing solutions, based on the R&S CMW500 mobile radio tester. This will help expedite the smooth integration of the 5G NR technology into existing LTE networks for the worldwide ecosystem, from chipset suppliers, modem and smartphone manufacturers to mobile network operators.

In close cooperation between the R&D teams of both Rohde & Schwarz and MediaTek, correct implementation of DSS algorithms on LTE and 5G NR has been tested extensively between the R&S CMX500 radio communication tester and MediaTek’s new 5G chipset Dimensity 1000. This verification will enable MediaTek to roll out their chipsets into markets where 5G NR technology is being used within existing LTE band allocations.

For more information on the R&S CMX500, visit: www.rohde-schwarz.com/cmx500

A short demo video about this and other industry-leading wireless test solutions from Rohde & Schwarz are available at: https://youtu.be/b53jkKUfaGE

Press & media contact

Christian Mokry
PR Manager Test & measurement
+49 89 412913052
press@rohde-schwarz.com

More information
Name
Type
Version
Date
Size
High resolution press picture
Type
Press pictures
Version
-
Date
Mar 3, 2020
Size
1 MB

Rohde & Schwarz

The Rohde & Schwarz technology group is among the trailblazers when it comes to paving the way for a safer and connected world with its leading solutions in test & measurement, technology systems, and networks & cybersecurity. Founded more than 85 years ago, the group is a reliable partner for industry and government customers around the globe. On June 30, 2020, Rohde & Schwarz had around 12,300 employees worldwide. The independent group achieved a net revenue of EUR 2.58 billion in the 2019/2020 fiscal year (July to June). The company is headquartered in Munich, Germany.


R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
All press releases, including photos for downloading, are available on the internet at www.press.rohde-schwarz.com.

Related Solutions and Product Groups

Informationen anfordern

Haben Sie Fragen oder benötigen Sie weitere Informationen? Nutzen Sie hierzu einfach unser Kontaktformular und wir setzen uns umgehend mit Ihnen in Verbindung.

Ich möchte Informationen von Rohde & Schwarz erhalten per

Marketing-Einverständniserklärung

Was bedeutet das im Einzelnen?

Ich bin damit einverstanden, dass die ROHDE & SCHWARZ GmbH & Co. KG und die im Impressum dieser Website genannte, ROHDE & SCHWARZ zugehörige Gesellschaft oder Niederlassung, mich über den gewählten Kommunikationskanal (E-Mail oder Post) zu Marketing- und Werbezwecken kontaktiert (z.B. zur Übersendung von Informationen über Sonderangebote und Rabattaktionen), die in Zusammenhang mit Produkten und Lösungen aus den Bereichen Messtechnik, sichere Kommunikation, Monitoring and Network Testing, Rundfunk- und Medientechnik sowie Cybersicherheit stehen, aber nicht auf diese beschränkt sind.

Ihre Rechte

Diese Einverständniserklärung kann jederzeit durch Senden einer E-Mail, in deren Betreffzeile "Unsubscribe" steht, an news@rohde-schwarz.com, widerrufen werden. Darüber hinaus enthält jede von uns versandte E-Mail einen Link, durch den das Abbestellen zukünftiger Werbung per E-Mail möglich ist. Weitere Einzelheiten zur Verarbeitung personenbezogener Daten und zum Widerrufsverfahren finden sich in unserer Datenschutzerklärung..

Ihre Anfrage wurde erfolgreich versendet. Wir nehmen in Kürze Kontakt mit Ihnen auf.
An error is occurred, please try it again later.