R&S®ZVA-Zxxx millimeterwave converters have a wide dynamic range. Rohde & Schwarz converters are very convenient to operate and enable fast measurements.

mmWave receiver modules for antenna test systems with the highest dynamic range.

mmWave receiver module, with a harmonic mixer, is a booster amplifier for controlled input power and a low noise amplifier for the IF signal.

The R&S®ZNA high-end vector network analyzers offer a DUT-centric approach,  an excellent RF-performance, a unique hardware concept and touch-only operation.

The R&S®ZCDSxxx mmWave dual-source converters allow mmWave intermodulation measurements in the frequency range up to 170 GHz.

mmWave transceiver modules for antenna test systems with the highest dynamic range.

The R&S®NRX power meter base unit with touch screen, support of up to four R&S®NRP and R&S®NRQ power sensors and all sensor-dependent measurement functions.

The R&S®NRT2 directional power meter measures forward and reflection power between source and load

ZNBT true multiport VNA vector network analyzer with up to 24 true VNA ports. Frequency range from 9/100 kHz to 8.5/20/26.5/40 GHz.

R&S®ZNA-K8 / R&S®ZVA-K8 - software option for clear and straightforward converter control and converter parameter settings.

VNA Source Phase Control Options for characterization of devices requiring a defined phase such as differential amplifiers, mixers, IQ mixers and others.

The R&S®ZNB vector network analyzer features a wide dynamic range, low trace noise and high output power and is targeted at applications in the electronic goods and mobile radio industries.

The R&S®ZNL is a cost-efficient, portable vector network and spectrum analyzer, ideal for development, production and in the field

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Learn more.

The FFT-based spectrum analysis function can be used to measure a DUT's spurious and harmonics, providing short sweep times along with high dynamic range and fine frequency resolution. It quickly detects undesired signal components (spurious) in converters and T/R modules. The marker-to-spectrumfunction directly gets to the root of problems in the event of unexpected S-parameter results, thus providing fast and extremely useful integrated diagnostics.

There are several reasons to characterize RF components under pulsed conditions. Often it is to prevent thermal damage to the device under test or to characterize it under operating conditions. Vector Network Analyzers offer integrated hardware and software for accurate device characterization under pulsed conditions. This hardware includes built-in pulse modulators, pulse generators and synchronization IO including for external device control.

The TDR option displays discontinuities, reflection factors or impedance versus delay/length.

Noise figure measurement with vector network analyzers

Options for characterizing frequency-converting devices such as mixers, block upconverters and downconverters, T/R modules and others.

The R&S®ZNLE is a cost-efficient benchtop vector network analyzer. The analyzer's excellent performance makes it ideal for education, development and production.

R&S®ZVH handheld cable & antenna analyzer increases efficiency in the field. Frequency range from 100 kHz to 3.6 GHz / 8 GHz.

The R&S®ZNB3000 vector network analyzer is optimized for high-volume production and demanding applications, thanks to industry-leading measurement speed, stability and scalability.

ZV-Z5x series of automatic economy calibration units. Upper frequency ranging from 3 GHz (2 ports, 75 Ω) to 8 GHz (8 ports), 20 GHz (6 ports)

Series of automatic economy calibration units with frequencies up to 50 GHz. 2 and 4 port models available. ZN-Z51 has configurable test ports.

ZN-Z15x automatic economy calibration units series up to 8.5 GHz: 2, 4 or 6 ports SMA(f), ZN-Z154 up to 24 ports, 2-port type N(f). ZN-Z156: 2 ports 67 GHz.

ZN-Z3x: Automatic recalibration without reconnecting calibration equipment. Supports TVAC, multiport and production systems. CAN bus network control. Up to 40 GHz.

R&S®ZN-Z1Exx economy calibration units from 5 kHz to 26.5 GHz. Two configurable ports: 3.5 mm-compatible or N-type. Further configurable as m or f.

ZCAN Network Analyzer Calibration Kit - Economy calibration kit with N-type calibration standards open, short, match, through, all in both, male and female versions. Up to 3 GHz. Available for 50 Ω and 75 Ω reference impedance.

This option supports automated compliance testing for 100BASE-T, 1000BASE-T, 100BASE-T1 and 1000BASE-T1 Ethernet of options RTO-K22, RTO-K24, RTO-K87, RTP-K22, RTP-K24, RTP-K87, RTP-K98