Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
1096 Results
Application program with documentation for sending a sequence of logged SCPI commands to the firmware of the R&S® Audio Analyzer UPV.
19-Jul-2010 | AN-No. 1GA53
This application note provides software and instructions for a simple check of the acoustic performance of mobile phones. It targets mainly service centers and repair workshops which have to perform incoming tests of defective mobile phones and final tests of repaired mobiles. A focus is set on short test times and ease of use, without compromising accuracy and repeatability of results.
14-Dec-2017 | AN-No. 1GA69
R&S®VISA is a standardized software library that allows fast communications over diverse interfaces with a wide variety of T&M instruments that are detected on the network from PC applications. R&S®VISA also includes a trace tool that simultaneously monitors communications between multiple applications and T&M instruments, and permits targeted analysis with the aid of efficient filters.
26-May-2020 | AN-No. 1DC02
All channels of DC power supplies R&S®NGL200 and R&S®NGM200 are isolated against the grounding equipment conductor and against the digital ground of the instrument. Therefore, channels can be connected in parallel for increasing the current capability, or in series for achieving higher voltages or dual-voltage supplies. In the case of parallel and serial connections it is usually desired to switch all channels simultaneously on and off for protecting the supplied circuitry and for avoiding overcurrent on other power supply channels.This application note describes how to connect and configure DC power supplies R&S®NGL200 and R&S®NGM200 for synchronized on and off switching of all channels across multiple power supplies.
15-Jun-2020 | AN-No. 1GP126
Play-only devices like CD- or MP3 players cannot be measured as traditional 4-pole devices. Therefore traditional transfer function measurements using the generator part of the audio analyzer are not possible. Those devices are tested with a pre-recorded test signal available as wav or MP3 file. This application note describes a fast test together with a setup and an executable which runs the test and displays the desired results. The test signal is provided as a linear coded wav file. This file can easily be coded into MP3 format using any commercially available or public domain wave editors or ripper programs. The test can also be executed by IEEE control and all results can be read out by IEEE commands.
28-Jun-2007 | AN-No. 1GA46
The instrument setup provided in this application note allows to analyze a degraded speech signal stored into a wave file and to display its FFT spectrum and waveform.
05-Sep-2014 | AN-No. 1GA66
This application note provides an application program for level alignment, test automation and reporting with PESQ, POLQA and delay measurements on the Audio Analyzer R&S®UPV or R&S®UPV66.
08-May-2013 | AN-No. 1GA62
This Application Note describes how the R&S® UPV and R&S® UPP200 audio analyzers can be used to replace the obsolete Agilent model 8903B audio analyzer in remote control applications.
24-Nov-2010 | AN-No. 1GA54
O-RAN radio units (O-RU) contribute significantly to the high power consumption of 5G networks. Making O-RUs energy efficient without sacrificing O-RAN innovations is a top priority.
19-Mar-2024
R&S®NESTOR cellular network analysis software supports law enforcement agencies (LEA) in forensics activities and crime scene investigations (CSI) by gathering information through analysis of surrounding mobile networks. R&S®NESTOR increases public safety by reducing crime scene investigation time by up to 50 %.
14-Mar-2024
The automotive industry is undergoing a transformative shift towards electrification. Precise measurement and analysis of electric drivetrains are vital to improved performance, efficiency and reliability. MXO oscilloscopes have become an essential test tool for these measurements, with real-time insight into voltage and current waveforms that let engineers and technicians explore the intricate mechanisms to improve drivetrain performance and efficiency.
12-Mar-2024
P25 and FRMCS scanning
Key points: Critical Infrastructure: Learn about mission-critical communication for various agencies who deal with Public Safety such as first responders, police, firefighters, medics and its crucial role in ensuring safety of society.Reliability of Communication: Understand the challenges posed by mission-critical communication, highlighting performance and reliability needs and special requirements such as safe group communications.Technology Migration: Delve into the migration of mission-critical communication from long-standing narrow-band technologies to broadband use cases considering migration timelines.Measurement Techniques: Explore network measurement methods for passive testing of legacy MCX technologies planned to be used in the networks for quite some time (a later release of the document will focus on the broadband successors)
12-Mar-2024 | AN-No. 8NT12
Integrated sensing and communication (ISAC) is a pillar of 6G. Combining two different yet similar worlds – communications and environmental sensing – brings the future to life in the 6G era. The key ISAC drivers are beamforming with MIMO arrays, artificial intelligence (AI), modern modulation schemes and dense network infrastructure. The R&S®AREG800A automotive radar echo generator is a core element of a versatile research and development test solution in the ISAC community.
11-Mar-2024
Transformers are passive devices that are primarily used to convert or "transform" alternating current (AC) from one voltage level to another. One very common application of transformers is in AC to DC power supplies, in which mains voltage is stepped down before being rectified and filtered to produce DC. There are numerous other applications for transformers, such as providing electrical isolation or for impedance matching.This educational note provides a brief technical introduction to measurements made on the types of transformers used in electronics. These transformers are typically physically small, work on relatively low voltages or powers, and are used for “indoor” applications. Although many of the testing concepts described below also apply to the larger, higher-power "outdoor" transformers used for electrical power distribution, the specific tests and test procedures for these types of transformers are often specified by standards bodies such as the IEEE and may differ substantially from the types of measurements described here.Read this educational note and dive into the discussion about the six most important transformer measurements: turns ratio, mutual inductance, phase angle, primary and secondary inductance, leakage inductance, and interwinding capacitance.
28-Feb-2024
Mobile network operators worldwide face cost pressures and escalating network complexity. The advent of 5G-NR has ushered in new use cases and flexibility, but it also comes with more stringent performance and availability requirements.Machine Learning can serve as a catalyst for the market to unearth deep insights that would otherwise remain concealed. It can also significantly streamline everyday tasks by fostering a smarter system that guides users through their routine work processes, rather than obliging them to repeat each (manual) step. Rohde & Schwarz Mobile Network Testing has focused its efforts on delivering Machine Learning use cases that distill relevant insights from drive testing data, thereby offering substantial benefits to users.This educational note explains the motivation and reasoning why this kind of approach is needed, what are the benefits of the machine learning offering and it takes a deeper look into how it can be used in various levels of statistical and technical analysis. Finally, this document provides real measurement results and analysis findings based on the Rohde & Schwarz post processing SW suite SmartAnalytics and its machine learning based features Call Stability Score and Network Utilization Rating.
28-Feb-2024 | AN-No. 8NT10
Part 1 of the Cable and Antenna verification series – essential for Mobile Networks
Key points: Critical Infrastructure: Learn why the antenna system, as part of mobile base stations, is irreplaceable and demands meticulous attention due to its impact on network quality and availability.Vulnerability to Environmental Factors: Understand the challenges posed by weather conditions and environmental stresses on antenna systems, highlighting the importance of robust design and maintenance.Fundamental Properties: Delve into the core concepts of antenna systems, gaining insights into their transmit and receive characteristics, which serve as the foundation for effective measurement and verification.Measurement Techniques: Explore various measurement methods for antenna systems, focusing on return loss and decoupling, and their significance in assessing system performance and integrity.
23-Feb-2024 | AN-No. 8NT11
With advanced FFT capabilities and unparalleled sensitivity and dynamic range, the MXO oscilloscopes are the perfect choice for electromagnetic interference (EMI) debugging. Swiftly and accurately detect and analyze EMI emanating from electronic circuits and boards with time-correlated RF analysis. Elevate your debugging experience with the fast performance of the MXO oscilloscopes.
07-Feb-2024
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy adapter assemblies supporting USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL407
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to legacy cable assemblies supporting USB3.1 Gen2, USB3.1 Gen1, and USB2.0. Based on 5 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
18-Jan-2024 | AN-No. 1SL406
Power converters with a full-bridge topology are frequently used in telecommunications and servers that need to be compact, efficient and cost sensitive, making them more complex. Switching patterns for all the main primary switches including synchronous rectifier switches need to be validated after the first protype is built. This complex validation requires proper measurement of switching patterns to prevent catastrophic switching patterns. Expertise and the right measurement tools are essential when identifying unexpected events in the converter switching process.
17-Jan-2024
The R&S®RTO6 oscilloscope has an in-depth tool for debugging custom and commercial off-the-shelf serial buses for the avionics and aerospace industries.
20-Dec-2023
Rohde & Schwarz offers a powerful tool for remote control of their oscilloscopes - the RsInstrument Python module. This module enables users to control and automate their Rohde & Schwarz test & measurement instruments, including oscilloscopes, through Python scripts or interactive console communication.
14-Dec-2023
New technologies and applications like 6G communications and sensing extend into sub-THz frequencies in the D band and beyond. New semiconductor technologies and processes need to be commercialized to support these efforts.
12-Dec-2023
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB Type-C to Type-C cable assemblies supporting USB4 Gen3, USB4 Gen2, USB 3.2 Gen2, USB3.2 Gen1, and USB2.0.
30-Nov-2023 | AN-No. 1SL405
How I/Q noise cancellation can help significantly improve the EVM performance of your signal and spectrum analyzer.
16-Nov-2023
This application note describes Methods of Implementation (MOI) for precise, fast, and error-free compliance testing of USB 3.2 Legacy Cable Testing for USB Type A, Type B, and Micro family connector types. Based on 5 Gbps and 10 Gbps signaling per lane with vector network analyzers from Rohde & Schwarz.
09-Nov-2023 | AN-No. 1SL408
R&S®RTP, R&S®RTO, R&S®RTE, oscilloscopes, acquired waveform data, python How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE. Working with acquired waveform data in Python R&S®RTP, R&S®RTO, R&S®RTE, oscilloscopes, acquired waveform data, python How to work with acquired waveform data in Python using the R&S®RTP, R&S®RTO or R&S®RTE. Working with acquired waveform
12-Jan-2022
Today’s cars are highly integrated and interconnected. Up to 150 embedded electronic control units (ECUs) in a car secure a convenient and safe driving experience. Examples of ECUs include transmission control modules, ECUs for air conditioning systems, and even self-updating 5G-ready telematics control units.
06-Jul-2020
The R&S®CMW500 and R&S®SMBV100B are the ideal team for motor vehicle type approval testing of your eCall and ERA-GLONASS cellular modems and their GNSS receivers in line with the EU2017/79 regulation.
02-May-2022