Application Notes for R&S®CBT/CBT32

1MA200 Nearly all tests in accordance with the Bluetooth low energy test specification V4.0 [1] can be performed using the R&S®CBT alone. Some tests additionally call for signal generators to provide interference signals. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the R&S ® CBTgo software. Bluetooth, Low Energy, CBT,

1MA106 Nearly all tests in accordance with the test specification* can be performed with the R&S ® CMU200/CBT alone. Some tests additionally call for signal generators to provide interference signals and also require spectrum analyzers. This application note describes the tests performed with additional equipment and presents straightforward solutions based on the CBTgo software. Bluetooth, CBTgo,

1MA153 The aim of this application note is to provide information regarding Rohde & Schwarz instrument drivers. This paper shall help application engineers and software developers to easily get an understanding of advanced techniques to develop test and measurement (T&M) applications by utilizing Rohde & Schwarz instrument drivers. Furthermore the nomenclature used for Rohde & Schwarz instrument drivers

1MA035 The use of Rohde & Schwarz device drivers under VEE software is not complicated. However, a number of factors are involved, the errors that occur are often difficult to diagnose. This application provides easy and detailed support for installation and troubleshooting using National Instruments or Agilent GPIB boards. Instrument Driver, Driver, Device, Network Analysis, VEE, VISA, AFGU, AMIQ,

1MA160 This application note explains how to create screenshots of Rohde & Schwarz instruments using instrument drivers. The presented examples are written in C (LabWindows/CVI), C# programming language and LabVIEW. The examples are available at the instrument driver download site. FSU, FMU, FSG, FSL, FSP, FSQ, FSV, FSUP, ESL, ETL, FSH, FSH3, FSH6, FSH18, ZVL, ZVA, ZVB, CMU, CMU200, CMU300, CBT, Analyzer

1MA45 This application note has been replaced by application note 1MA074 RSCommander . Screenshot, Hardcopy, GPIB, IEEE, IEC, CMUCopy, RS232, CMU, CMU200, CMU300, CBT, Tester, Communication Tester, Bluetooth Tester CMUCopy - Transferring CMU Hardcopy to PC using the IEEE Bus or the serial interface

1MA83 GDE (= Generic Demonstration Engine) is a easy-to-use, free-of-charge remote control command sequencer tool. The big advantage is that the test description is stored in a simple, easy-to-read text file, and loaded in GDE at runtime. This makes it very easy to modify tests by the user or add additional tests to already existing test solutions without redistributing big setup files. Remote Control

1CM50 This application note describes how Bluetooth devices are tested and measured using the R&S CMU200/CBT by means of the CMUgo/CBTgo remote control program or manual operation. Bluetooth,CMU200,CMU,CMUgo,CBT,CBTgo Measurements on Bluetooth Devices using R&S CMU200 and CMUgo Subject to change – Bernhard Schulz 09.2006 – 1CM50_2E R&S CMU200 (B53, K53, possibly B41), CMUgo, R&S CBT/CBT32 (B55, K55