EMI test receivers

EMI test receivers

The indispensable core component of every EMC test strategy

EMI test receivers

The indispensable core component of every EMC test strategy

EMI test receivers; extremely accurate instruments designed to detect electromagnetic emissions rigorously, to ensure all emissions conform to the Standard being tested to. Configured to set up running the required tests for parameters defined by the Standards as simply as possible, including automated test routines. R&S EMI test receivers can be much more too, with a full signal and spectrum analyzer in the same instrument.

R&S EMI test receivers support the full range of commercial, automotive and military EMI Standards from all leading Standard authorities, including IEC, CISPR, CENELEC, ETSI, FCC, ANSI, RTCA and MIL-STD. All the latest amendments including the fast FFT-based time-domain scan that makes testing many times faster than conventional frequency scans, are all supported. The instruments cover all required frequency ranges up to 44 GHz, with frequencies up to 500 GHz supported by external mixers.

R&S supplies both full compliance and precompliance EMI test receivers. Fully compliant receivers implement all requirements of the above mentioned Standards, needed for certification testing. Precompliance receivers are an ideal cost/benefit solution for EMI testing during development. They implement bandwidths, limits and detectors defined by the standards, but do not entirely meet the exacting demands of full compliance.

EMI test receivers
Product Name
Application
Frequency range
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
Max. analysis bandwidth
Application
The high end EMI compliance test receiver with top RF characteristics for super fast measurements with high bandwidth, multiple CISPR APD or external mixers.  
Frequency range
 1 Hz to 8 / 26.5 / 44 GHz
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
-169 dBm
Max. analysis bandwidth
1 Hz to 80 MHz
Application
The R&S®ESR is a compliance EMI test receiver with an optional DC input and battery pack enabling fast measurements in the lab as well as in the field. 
Frequency range
10 Hz to 3.6 / 7 / 26.5 GHz
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
-168 dBm
Max. analysis bandwidth
10 Hz to 10 MHz, 40 MHz in zero span
Application
The R&S®ESRP is an EMI test receiver for diagnostic measurements during development and precompliance testing as a preparation for the final certification test.
Frequency range
10 Hz / 9 kHz to 3.6 / 7 GHz
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
-162 dBm
Max. analysis bandwidth
10 Hz to 10 MHz, 40 MHz in zero span
Application
The R&S®EPL1000 is a compliance EMI test receiver for measurements up to 30 MHz with an optional DC input and a battery pack for fast measurements in the lab and field.
Frequency range
5 kHz to 30 MHz
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
-156 dBm (up to 30 MHz)
Max. analysis bandwidth
1 Hz to 10 MHz
Application
The R&S®ESL combines an EMI test receiver and a spectrum analyzer in one instrument, making it versatile for diverse lab applications and EMI analysis.
Frequency range
 9 kHz to 3 / 6 GHz
Displayed average noise level (typically, 1 MHz < f ≤ 1 GHz)
-160 dBm
Max. analysis bandwidth
 10 Hz to 10 MHz, 20 MHz in zero span
Wideband extension
Product Name
Description
Description
Wideband extension for the highest testing speeds and greatest insight
    0 of 3 Compare products
    Select at least 2 Products

    Promotion: Trade-in your old EMI compliance receiver

    Save up to 25% trade-in credit for R&S®ESR or R&S®ESW.

    More information

    Wideband extension

    Get ready for the R&S®ESW wideband extension, enabling superior measurement speed and greater insights for interference testing.

    More information

    EMC solutions

    EMC testing overview

    Rohde & Schwarz offer a wide-range of test solutions based on in-depth EMC compliance, precompliance, and debugging expertise.

    More information

    EMI debugging

    Shorten the design process; detect, analyze, and correct causes of Electromagnetic Interference (EMI) during development.

    More information

    EMI precompliance testing

    The ideal preparation for pass-first-time EMI compliance test.

    More information

    EMC compliance testing

    Full compliance to CISPR, IEC, ISO and MIL standards assured; reliable certification measurements in minimum test times.

    More information

    Related information and services

    EMC system solutions

    Rohde & Schwarz provide turnkey EMC test systems tailored to specific needs in full compliance with current EMC standards.

    More information

    Knowledge center

    Learning offers, customer support and demonstrations, are all integral part of our offer.

    More information

    Services

    We support you through all phases of the product life cycle with an extensive and constantly growing portfolio of services.

    More information

    Request information

    Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

    Marketing permission

    Your request has been sent successfully. We will contact you shortly.
    An error is occurred, please try it again later.
    General and legal information

    Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

    You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

    Terms & Conditions of the Prize Draw 10 years Rohde & Schwarz oscilloscopes

    1. The prize draw “10 years Rohde & Schwarz oscilloscopes” (herein referred to as “Draw”) is organized by Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Germany, Tel. +49 89 41 29 0 (herein referred to as “R&S).

    2. All participators can register to the draw during January 01, 2020 to December 31, 2020 with their name, company name and business e-mail.

    3. Participation is free of charge and not dependent on the purchase of goods or services.

    4. The draw is only open to legal entities and only the legal entities are able to win the prizes. An individual person is not allowed to participate on its own name and its own account but as a representative of a legal entity filing the participation form in the name of and on behalf of the legal entity.

    5. The prizes to win are 1 of 10 R&S®RTB2000 within the time frame January 1, 2020 to December 31, 2020:

    Prize: 1x R&S®RTB2000 Digital Oscilloscope

    6. The draw takes place at Rohde & Schwarz headquarters, Muehldorstrasse 15, 81671 Munich. The winner of the prizes will be informed by e-mail within 5 (5) working days.

    7. The authorized representative of the legal entity shall inform Rohde & Schwarz about the acceptance of the price. In case of the denial of the acceptance, or no answer within two (2) weeks, a new winner will be drawn. If no winner can be determined within four (4) weeks, the draw ends and the prize forfeit.

    8. R&S’ employees and members of their families and also person being familiar with the process of the draw and members of their families are excluded from filling the participation form.

    9. No cash equivalent or exchange of prizes is allowed. Prizes are non-transferable. All taxes, levies, duties, fees and other charges levied in the participant´s country shall be borne by the participant.

    10. Personal data will be processed only for the purpose of this prize draw and deleted four (4) weeks after the draw, if not agreed otherwise.

    11. Any Participant who does not comply with these Terms & Conditions may be disqualified by R&S from this Competition. In such cases, prizes can also be withdrawn retrospectively. In case a prize is withdrawn retrospectively due to the non-compliance with these Terms & Conditions, it shall be returned by the respective participant at his cost to R&S’ address mentioned under Nr.1 and a new winner will be drawn.

    12. The participants cannot claim the prizes of this draw and no legal recourse is permitted in this respect.

    13. The draw and any contractual relationship arising therefrom between R&S and the respective participant shall be governed by and construed in accordance with the laws of Germany, without any recourse to the conflict of laws. The courts of Munich, Germany, shall have exclusive jurisdiction in case of any disputes arising directly or indirectly from the participation in this Competition.

    * “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.