340 Results
This application note expands modulation bandwidth up to 2 GHz and covers both V- and E-band examples.
18-Jun-2015 | AN-No. 1MA257
The R&S®FSW67 high-end signal analyzer with its 67 GHz and 500 MHz of analysis bandwidth is paving the way for developers of future 5G applications with signals in the highest frequency ranges. video, 5G, spectrum analyzer, FSW At the GSMA Mobile World Congress 2014 in Barcelona, Rohde & Schwarz demonstrated signal generation and analysis solutions for handling extremely high frequencies and/or ultrawide
The setup is based on the R&S ® SMW200A vector signal generator, the R&S FSW signal and spectrum analyzer and the R&S ® RTO oscilloscope to test bandwidths up to 2 GHz . This makes the solution ideal for developing transceivers for 5G. video, oscilloscope, LTE, SMW200A, FSW, RTO, 5G A compact test solution to generate and analyze ultra-wideband signals has been demonstrated by Rohde & Schwarz at the
This application note focuses on satellite post-launch or on-orbit measurement and monitoring strategies used for satellite functionality checks.
25-Nov-2016 | AN-No. 1MA263
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
Combined with the R&S®FSW signal and spectrum analyzer supporting an internal 1.2 GHz analysis bandwidth makes this setup ideal for in-depth component characterization such as for 28 GHz power amplifier development.
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
IQWizard - IQ Signal Measurement and Conversion
26-Apr-2013 | AN-No. 1MA028
The demystifying 5G video series discusses main topics related to 5G including requirements, timeline, potential frequency and waveform candidates. video, SMW200A, FSW, signal generator, signal analyzer, 5G How about 5G EVM measurements better than 40 dB at 28 GHz?
The application note address test and measurement possibilities for DVB-S2 and DVB-S2X signals in the Ku & Ka -band.
08-Mar-2016 | AN-No. 1MA273
The document focusses on devices for the 3.5 GHz NR (5G New Radio) candidate band, but its findings are equally applicable to developments and measurements for K-band satellite applications or mmW NR candidate bands,
01-Aug-2017 | AN-No. 1MA289
Digital pre-distortion (DPD) is a common method. This article describes an approach to generate a pre-distorted signal based on a hard-clipper.
13-Sep-2017 | AN-No. 1EF99
This application note describes how all required receiver (Rx) tests (TS25.141 Chapter 7) can be performed easily and quickly by using vector signal generators and CW sources from Rohde & Schwarz.
21-Oct-2014 | AN-No. 1MA114
Together with the R&S®FSW signal and spectrum analyzer, TX, RX and performance testing using only the intuitive 5G NR software options on the two instruments becomes an easy task.
Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.
Hints and Tricks for Remote Control of Spectrum and Network Analyzers
19-Aug-2014 | AN-No. 1EF62
This Application Note addresses signal measurements and analysis of automotive radars that are crucial during the development and verification stages.
10-Jun-2016 | AN-No. 1MA267
LTE is under continuous development. Release 10 (LTE-Advanced) introduced carrier aggregation (CA) as the primary enhancement. Releases 11 and 12 add several new components to LTE. Some are enhancements to existing features (such as improvements to CA), while others are completely new concepts, such as coordinated multipoint (CoMP).This application note summarizes the Rohde & Schwarz test solutions for LTE-Advanced according to Releases 11 and 12 using vector signal generators, signal and spectrum analyzers and the wideband radio communication tester.
14-Jul-2016 | AN-No. 1MA272
Direct remote control of OSP via VNA and SA
06-Dec-2013 | AN-No. 1MA226
conducted conformance testing according to TS 38.141-1, Rel. 15
This application note describes how all mandatory RF receiver tests can be performed quickly and conveniently with signal generators from Rohde & Schwarz.
02-Dec-2020 | AN-No. GFM314
This application note describes the configuration of a Miracast wireless video transmission system and how to measure delay times.
01-Oct-2015 | AN-No. 1MA250
R&S®Fxx-K40 Phase Noise Measurement Application – R&S®FSW-K40, R&S®FSMR3-K40, R&S®FSV3-K40, R&S®FPS-K40, R&S®FSV-K40, R&S®FPL1-K40 - Specifications
conducted conformance testing according to TS 38.141-1, Rel. 16
This application note describes how all mandatory RF transmitter tests according to Release 16, can be performed with signal or spectrum analyzers from Rohde & Schwarz.
27-Jan-2021 | AN-No. GFM313
radiated conformance testing according to TS 38.141-2, Rel. 16
3GPP defines the Radio Frequency (RF) conformance test methods and requirements for 5G NR Base Stations (BS) in the technical specifications TS 38.141.
30-Jun-2020 | AN-No. GFM325
R&S®VSE-K60(x) / FSW-K60(x) / FSWP-K60(x) / FSV3-K60(x) Transient measurements - Specifications
1MA210 - Testing LTE Release 9 Features. This Application Note describes the T&M methods for LTE Release 9 features using Rohde & Schwarz instruments.
26-Apr-2013 | AN-No. 1MA210
This application note summarizes the Rohde &Schwarz test solutions for LTE-Advanced (Release 10) using Vector Signal Generators, Signal and Spectrum Analyzers and the Wideband Radio Communication Tester.
03-Sep-2014 | AN-No. 1MA166
Introduction to Attribute Based Instrument Drivers
01-Dec-2012 | AN-No. 1MA170
02-May-2017
Rohde & Schwarz T&M equipment adopted by Renesas for R&D, conformance test and production of IEEE 802.11p devicesRohde & Schwarz T&M equipment enables semiconductor manufacturer Renesas to provide first class communications solutions for the 11p market.