This video shows how to perform such coexistence tests using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation The performance of GNSS receivers must be validated and characterized not only under ideal conditions, but also in the presence of other communication signals like GSM, UTMS or LTE.

It is also demonstrated how CRPAs can be tested using R&S’s high-end GNSS simulator R&S®SMW200A. video,SMW200A, GNSS simulation This video shows how to perform advanced interferer simulations for testing multi-antenna GNSS receivers with anti-jam capabilities, also known as Controlled Reception Pattern Antennas (CRPAs).

The test solution is based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyser. The R&S ® SMW200A provides realtime RF and envelope signal generation plus digital predistortion in one instrument and the R&S ® FSW enables full PA characterization, including EVM, gain and distortion measurements.

The R&S®SMW200A vector signal generator can internally simulate all MIMO constellations up to 8x2, including fading. Higher order MIMO testing, LTE, WLAN 802.11ac MIMO testing requires a signal generator with multipath and standard-compliant fading simulation in all signal paths.

Testing Direction Finding Devices Using R&S®Pulse Sequencer and R&S®SMW-K545 This video shows how to define a Direction Finding scenario in the R&S®Pulse Sequencer software and how to replay the scenario on a 4 channel R&S®SMW200A setup that has been aligned in terms of amplitude, delay and phase.

The setup is based on the R&S ® SMW200A vector signal generator, the R&S FSW signal and spectrum analyzer and the R&S ® RTO oscilloscope to test bandwidths up to 2 GHz . This makes the solution ideal for developing transceivers for 5G. video, oscilloscope, LTE, SMW200A, FSW, RTO, 5G A compact test solution to generate and analyze ultra-wideband signals has been demonstrated by Rohde & Schwarz at the

The setup based on the R&S ® SMW200A vector signal generator and the R&S ® FSW signal and spectrum analyzer can test bandwidths up to 2 GHz, which is 100 times larger than in current LTE networks. FSW, Test & Measurement, Signal and Spectrum Analyzer This Video shows unleashing 5G mm-wave frequencies presented at GSMA MWC 2015

The realtime RF and envelope signal is provided from a single instrument, the R&S®SMW200A vector signal generator. The R&S®FSW signal and spectrum analyzer measures, for example, distortion and power added efficiency (PAE). The most versatile and easy envelope tracking test solution has been demonstrated by Rohde & Schwarz at the GSMA Mobile World Congress 2014 in Barcelona.

A combination of the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer equipped with the R&S®FSW-K19 option can be used to characterize two-port devices such as satellite transponders, power amplifiers and converters.

The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator. Dynamic spectrum sharing (DSS) enables 5G NR to coexist with LTE in the same frequency bands. The video demonstrates the configuration of an LTE signal including MBSFN subframes based on the R&S SMW200A vector signal generator.

Group delay measurements made fast and easy with the R&S®FSW and R&S®SMW The R&S®FSW spectrum analyzer and R&S®SMW200A signal generators can be used to measure absolute and relative group delay (GD) on satellite transponders, frequency converters and other components.

To access the insightful video showcasing these tests in detail just register.

Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.

Using the R&S SMW200A vector signal generator makes it very easy to set up a 5G cell.

The R&S®FSW signal and spectrum analyzer with the R&S®FSW-K18 amplifier measurement option and in combination with the R&S®SMW200A vector signal generator characterizes amplifiers and other two-port devices with any given stimulus.

Visit us at the EuMW. We look forward to welcoming you at our Rohde & Schwarz booth.

This case study by Kongsberg presents a solution on how to qualify multi-channel direction finding radar receivers in the lab.

This video demonstrates the generation of a 5G NR waveform using the R&S®SMW200A vector signal generator and the R&S®SMW-K114 5G air interface candidates option from Rohde & Schwarz. In this example the 5G waveform uses one of the physical layer parameterization currently discussed in 3GPP RAN1.

Learn more about measurement-aided Doherty amplifier design with the R&S SMW200A dual-path vector signal generator.

Join us to explore the technical challenges faced by 5G non-terrestrial communication networks (NTN) implemented with low earth orbiting (LEO) satellites.

MWC2019, SMW200A, SMW-B15, FSW, fading, 5G, Rel.15, base station test, performance test, FR1, FR2 Rohde & Schwarz shows the most compact solution on the market for 5G NR base station performance testing at GSMA Mobile World Congress 2019 in Barcelona.

Based on the R&S®SMW200A vector signal generator and the R&S®FSW signal and spectrum analyzer, Rohde & Schwarz demonstrated WLAN IEEE 802.11ad signal generation and analysis as an example of a broadband signal up to 2 GHz.

We will also demonstrate how to integrate this channel model into the Rohde & Schwarz SMW200A vector signal generator.

FE170ST, FE170SR, 6G tester, 6G test quipment, D-Band test equipment The basebands of a 2-path R&S®SMW200A signal generator can be combined to provide a signal with 4 GHz RF bandwidth.

This application note is a programming guide. It briefly summarizes basic tips and information about SCPI programming for remote-controlling Rohde & Schwarz signal generators.

26-Apr-2013 | AN-No. 1GP79

26-Oct-2022 | Press Releases | Test & measurement

To further exploit the huge potential of 5G, the wireless industry has continued to develop the standard up to Release 16, and development continues. But technology does not stand still, and even as 5G presses forward, a new generation of cellular technology is emerging. Cutting-edge 6G research is already underway at communications equipment manufacturers and research institutions, and reconfigurable intelligent surfaces (RIS) is a major area of interest in 6G research. Rohde & Schwarz, with Tsinghua University and Actenna Technology, recently completed an evaluation and trial of RIS technology to comprehensively evaluate the effects and performance of RIS deployment.

Full RF component characterization using a single RF connection.

10-Nov-2025

Webinar: Unlocking the power of satellite channel emulation

Satellite navigation testing: create and simulate satellite-based navigation systems with automotive infotainment solutions from Rohde & Schwarz.

This Application Note covers 2x2 MIMO in the LTE downlink. Remote control programming is demonstrated by examples for a free-of-charge program.

09-Oct-2014 | AN-No. 1MA143