R&S®AdVISE Visual Inspection Software

Automated EUT monitoring based on camera signal evaluation

R&S®AdVISE Visual Inspection Software
Abrir Lightbox
R&S®AdVISE Visual Inspection Software, Screenshot

Key Facts

  • Wide range of powerful test methods
  • Continuous monitoring of up to 16 or 32 (optional) regions on the EUT in parallel
  • Saves time and eliminates human inattention
  • Compensation of vibrations with real time image tracking (optional)
  • Runs independently and under the control of system software

At a glance

R&S®AdVISE visual inspection software automates the process of visually monitoring an equipment under test (EUT) during a test sequence. This eliminates human inattention, ensures reproducible results and simplifies the test documentation. A typical application is EMS testing with R&S®EMC32 and R&S®ELEKTRA test software.

Features & benefits

System concept

Flexible and economical

  • Runs on any WindowsTM 7/10 controller that fulfills the minimum system requirements
  • Control software such as R&S®EMC32 or R&S®ELEKTRA can run on the same controller
  • Video grabbing via off-the-shelf portable frame grabber
  • Supports all cameras with DVI, HDMITM or HD-SDI interface
  • Supports the use of a multiviewer to analyze in parallel the video of up to four cameras

R&S®AdVISE setup
Abrir Lightbox

R&S®AdVISE setup

Typical R&S®AdVISE setup in a network system with the R&S®EMC32 or R&S®ELEKTRA EMC control software.

Optimal analysis efficiency

Regions of interests

Regions of interest (ROI) are the mechanism by which the user defines how to use the R&S®AdVISE system. A wide range of analytical methods covers a broad spectrum of visual inspection:
Illumination intensity

  • Optical Character Recognition (OCR) for text and numbers
    with option R&S®ADV-K1060
  • Indicator brightness and color
  • Analog indicator position
  • Presence or absence of symbols and icons
  • Change of numbers and fonts
  • Flashing indicator characteristics
  • Stop of motion
  • Audiomonitoring - Check of wanted or unwanted noise with option R&S®ADV1062

Checking a numerical readout with ROI OCR Number
Abrir Lightbox

Checking a numerical readout with ROI OCR Number

Image tracking

Option R&S®ADV-K1062

  • Automate visual inspection, even if running motors, shaky turntable or unstable camera suspension causes image vibrations.
  • Simplifies camera repositioning

Real time object tracking
Abrir Lightbox

Real time object tracking

Reliable analysis even with vibrations

Virtual camera

Option R&S®ADV-K1050

R&S®AdVISE can also analyze video recordings of completed tests with the R&S®ADV-K1050 virtual camera option.

  • Supports a wide range of video file containers and video formats
  • Same operation as during real-time operation

Virtual camera user interface
Abrir Lightbox

Virtual camera user interface

Using the virtual camera option to check the video record of an EUT during a test run

Video protocol and test report

Integrated protocol utilities

R&S®AdVISE creates a video protocol and an event list. What sets the system apart in usability is the indexing feature of the integrated video player. This feature allows the user to go to any event in the video just by clicking on the event information. The player also enables the user to collect a single frame as a JPEG image and to collect a clip of the video to be used for reports or archiving. The event list itself can be saved as a PDF test report.

Event controlled video protocol
Abrir Lightbox

Event controlled video protocol

Show any event in the video by cklicking on the event information

Remote control

R&S®AdVISE has a generic and an extended remote control interface

Generic remote control interface:

  • Open for any external control software
  • Passes summary Go/NoGo information to the control software
  • Control software can transmit test information to be inserted into the incoming and recorded video


  Extended remote control interface:
  • Supported in R&S EMC control software R&S®EMC32 and R&S®ELEKTRA
  • Same features as generic interface
  • Provides in addition the test results of the individual ROIs for graphical processing in R&S®EMC32

Measurement view overlaid EMS test conditions
Abrir Lightbox

Measurement view overlaid EMS test conditions

Available options

Base unit
Product
Descripción
R&S®ADVISE-SW

Order Number 1434.6518.02

Descripción

Visual inspection software

R&S®ADVISE-PC

Order Number 1434.6660.02

Descripción

License dongle

Software options
Product
Descripción
R&S®ADV-K1032

Order Number 1434.6524.02

Descripción

Extension to 32 ROI

R&S®ADV-K1050

Order Number 1434.6530.02

Descripción

Virtual camera

R&S®ADV-K1060

Order Number 1434.6601.02

Descripción

ROI Optical caracter recognition for text and numbers

R&S®ADV-K1062

Order Number 1434.6618.02

Descripción

ROI Audio

R&S®ADV-K1070

Order Number 1434.6560.02

Descripción

Image Tracking

Related videos

Software de inspección visual R&S®AdVISE - Función de tracking

sept 15, 2020

Software de inspección visual R&S®AdVISE - Monitorización de objetos rotatorios

sept 15, 2020

Software de inspección visual R&S®AdVISE - Monitorización de audio

sept 15, 2020

Software de inspección visual R&S®AdVISE - Monitorización de indicadores analógicos

sept 15, 2020

Software de inspección visual R&S®AdVISE - ensayos automatizados de inmunidad usando el R&S®AdVISE con R&S®ELEKTRA

jul 28, 2020

Software de inspección visual R&S®AdVISE - Monitorización de indicadores de cambios dinámicos

jul 28, 2020

Software de inspección visual R&S®AdVISE: de un vistazo

jul 10, 2020

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.