R&S®ZV-WRx/ZCWMxx waveguide calibration kits

up to 1100 GHz

R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Abrir Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Abrir Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Abrir Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Abrir Lightbox
R&S®ZV-WRx/ZCWMxx waveguide calibration kits
Abrir Lightbox
R&S®ZV-WRx network analyzer calibration kits – waveguide, Front High R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view R&S®ZV-WRx network analyzer calibration kits – waveguide, Side view

Key Facts

  • Waveguide calibration kit series covering 50 GHz to 1100 GHz
  • Including match, short, offset short
  • Optional version including sliding match
  • Calibration kit parameters pre-installed in R&S®VNAs
  • Calibration kit versions with sliding match available

Extending to the mmWave range

The R&S®ZV-WRxx calibration kit series provides waveguide calibration standards for system error correction of mmWave network analyzer setups. All common waveguide bands from 50 GHz to 1100 GHz are supported. The calibration kits contain short, offset short and match. Separate models with a sliding match are also available. The sets come with a hex ball driver and hex ball screws. The calibration kit data are pre-defined on each Rohde & Schwarz vector network analyzer, allowing for straightforward and reliable calibration.

Features & benefits

Sliding match models

Get high-end accuracy

There are extra models that include a sliding match. Using a sliding match instead of a fixed match further increases measurement accuracy.

ZV-WR10 kit with sliding match
Abrir Lightbox

ZV-WR10 kit with sliding match

High mechanical stability

Short with offset margin for reliable results

Especially with the high-frequency kits, a bare lambda/4 shim standard is very thin, which can result in tensions and bending when connected and in poor accuracy. To ensure reliable results, the shim standard for some ZV-WRxx kits is designed with an additional offset length to ensure high mechanical stability and reproducible results. (Please note: the dedicated offset short is a different standard.)

Available models

Available models
Modelos
Type
Frequency range
Connector type
Calibration standards

R&S®ZV-WR02

Order Number 1314.5550.10

Type
Waveguide calibration kit
Frequency range
325 GHz to 500 GHz
Connector type
WR02
Calibration standards
Short, Offset Short, Match,  without sliding Match

R&S®ZV-WR03

Order Number 1307.7300.30

Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
without sliding match

R&S®ZV-WR03

Order Number 1307.7300.31

Type
Waveguide calibration kit
Frequency range
220 GHz to 325 GHz
Connector type
WR03
Calibration standards
with sliding match

R&S®ZV-WR05

Order Number 1307.8106.10

Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
without sliding match

R&S®ZV-WR05

Order Number 1307.8106.11

Type
Waveguide calibration kit
Frequency range
140 GHz to 220 GHz
Connector type
WR05
Calibration standards
with sliding match

R&S®ZV-WR06

Order Number 1311.8807.10

Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
without sliding match

R&S®ZV-WR06

Order Number 1311.8807.11

Type
Waveguide calibration kit
Frequency range
110 GHz to 170 GHz
Connector type
WR06
Calibration standards
with sliding match

R&S®ZV-WR08

Order Number 1307.7900.10

Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
without sliding match

R&S®ZV-WR08

Order Number 1307.7900.11

Type
Waveguide calibration kit
Frequency range
90 GHz to 140 GHz
Connector type
WR08
Calibration standards
with sliding match

R&S®ZV-WR10

Order Number 1307.7100.10

Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
without sliding match

R&S®ZV-WR10

Order Number 1307.7100.11

Type
Waveguide calibration kit
Frequency range
75 GHz to 110 GHz
Connector type
WR10
Calibration standards
with sliding match

R&S®ZV-WR12

Order Number 1307.7700.10

Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
without sliding match

R&S®ZV-WR12

Order Number 1307.7700.11

Type
Waveguide calibration kit
Frequency range
60 GHz to 90 GHz
Connector type
WR12
Calibration standards
with sliding match

R&S®ZV-WR15

Order Number 1307.7500.30

Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
without sliding match

R&S®ZV-WR15

Order Number 1307.7500.31

Type
Waveguide calibration kit
Frequency range
50 GHz to 75 GHz
Connector type
WR15
Calibration standards
with sliding match

R&S®ZCWM-1092

Order Number 3628.5699.02

Type
Waveguide Calibration Kit
Frequency range
170 GHz to 260 GHz
Connector type
WM-1092
Calibration standards
without sliding match

R&S®ZCWM-710

Order Number 1339.4070.02

Type
Waveguide Calibration Kit
Frequency range
260 GHz to 400 GHz
Connector type
WM-710
Calibration standards
without sliding match

R&S®ZCWM-570

Order Number 1322.3099.10

Type
Waveguide Calibration Kit
Frequency range
330 GHz to 500 GHz
Connector type
WM-570
Calibration standards
without sliding match

R&S®ZCWM-380

Order Number 1322.3101.02

Type
Waveguide Calibration Kit
Frequency range
500 GHz to 750 GHz
Connector type
WM-380
Calibration standards
without sliding match

R&S®ZCWM-250

Order Number 1322.3118.02

Type
Waveguide Calibration Kit
Frequency range
750 GHz to 1100 GHz
Connector type
WM-250
Calibration standards
without sliding match

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.