Promo: What's next? Taking industry leadership or watching from the sidelines?

What's next? Taking industry leadership or watching from the sidelines?

Take the lead with up to 60% off our instruments

100BASE-T1/BroadR-Reach® ethernet software

Compliance test

100BASE-T1/BroadR-Reach® ethernet software
Abrir Lightbox
100BASE-T1/BroadR-Reach® ethernet software
Abrir Lightbox
100BASE-T1/BroadR-Reach® Ethernet software, Software 100BASE-T1/BroadR-Reach® Ethernet software, Application Image

Key Facts

  • Test solution of BroadR-Reach® Ethernet interfaces
  • Predefined, automated test steps
  • Step-by-step wizard for user guidance
  • Clear and comprehensive test documentation
  • Test report documents results including numerical data or screen shots
  • Multi-domain icon
  • HD 16 bit

Oscilloscope software

The R&S®RTP-K24 and R&S®RTO-K24 option offers an automated compliance test solution for 100BASE-T1 or BroadR-Reach® Ethernet according to OPEN Alliance TC8 and IEEE 802.3bw compliance test specification. The test wizard guides the user via illustrated step-by-step instructions. Automatic test sequences allow for a fast test run. A configurable test report documents the test results. The complete Ethernet compliance test solution includes the R&S®RT-ZF8 Test Fixture.

Features & benefits

Includes all relevant tests

Meets OPEN TC8 and IEEE 802.3bw test specifications

The complete test solution covers all mandatory and optional test cases of the OPEN TC8 test specification for ECU compliance testing. The complete solution includes an oscilloscope and a vector network analyzer. For accurate probing, the RT-ZF8 test fixture meets OPEN TC8 fixture validation.

Abrir Lightbox

Fully automatic or manual tests

The R&S®ScopeSuite has a test wizard for guided steps. The tests used are fully automatic. In addition, single tests can be carried out for efficient debugging. The limit editor lets you individually adjust standard-specific test limits.

Abrir Lightbox

Guided test steps

Ease-of-use with image-based guided test steps

The Ethernet compliance test is a fully guided test. Detailed, image-based instructions make it easy to correctly connect the oscilloscope and the probes to the test fixture and the device under test. This increases the ease-of-use and reduces potential setup errors.

Abrir Lightbox

Strong reporting functionality

Clear and comprehensive reporting functionality

The test results are fully documented in a report created by the R&S®ScopeSuite. Depending on the user’s preference, the test report can include numerical result data or oscilloscope screen shots. The available output formats are PDF, DOC and HTML.

Abrir Lightbox

Complete solution

Test solution includes oscilloscope, VNA, Waveform generator and test fixtures

The compliance test setup includes test cases that need a waveform generator and a network analyzer. R&S offers a complete solution with the R&S®RTO-B6 waveform generator and the R&S®ZND Vector Network Analyzer. The R&S®ScopeSuite compliance test software fully supports all instruments for a fully integrated compliance test solution.

Abrir Lightbox

Available models

Available models
Modelos
Min. bandwidth
Description
Base unit

R&S®RTO-K24

Order Number 1329.7483.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit

R&S®RTP-K24

Order Number 1800.6531.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit

R&S®RTO6-K24

Order Number 1801.6941.02

Min. bandwidth
600 MHz
Description
Automated compliance test solution for 100BASE-T1/BroadR-Reach® Ethernet in line with openSIG compliance test specification
Base unit
Specifications
Recommended configuration R&S®RTO-K24 - RTO2004
- RTO-B6 (for tests with distruber)
- RTO-B4
- RT-ZF8 Ethernet test fixture
- RT-ZF3 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)
- Shielding chamber
R&S®RTP-K24 - RTP044
- RTP-B6 (for tests with distruber)
- RT-ZF8 Ethernet test fixture
- RT-ZF3 Frequency converter
- 2 x SMA cables
- ZND or ZNB Network Analyser (option K5 or K6 required)
- Shielding chamber

Available options

Software options
Product
Descripción

Order Number 1329.7419.02

Descripción

High definition mode.

Order Number 1337.8856.02

Descripción

High definition mode

Extras
Product
Descripción
R&S®RT-ZF2

Order Number 1317.5522.02

Descripción

Test fixture for 10/100/1000BASE-T, 10G-BaseT and BroadR-Reach Ethernet

Supported by R&S®RTO-K22, R&S®RTO-K23 and R&S®RTO-K24 Ethernet compliance test options.

R&S®RT-ZF3

Order Number 5025.0670.02

Descripción

Frequency converter

for 100BASE-T1/BroadR-Reach compliance test

R&S®RT-ZF7A

Order Number 1801.4126.02

Descripción

SMA Adapter

High precision adapter board from automotive connector to SMA

R&S®RT-ZF8

Order Number 1801.3694.02

Descripción

Automotive Ethernet Compliance Fixture

Test fixture for 100BASE-T1 and 1000BASE-T1 compliance testing according to IEEE and OPEN TC8

R&S®RTO-B4

Order Number 1304.8305.02

Descripción

OCXO 10 MHz

Increase time base accuracy to ±0.02 ppm after calibration

Order Number 1329.7054.02

Descripción

Arbitrary waveform generator

Add 2-channel 500 MSample/s waveform generator and 8-channel pattern generator

R&S®ZND-K5

Order Number 1328.5312.02

Descripción

Full test set, Base Unit, bidirectional, 4.5GHz

Order Number 1410.4609.02

Descripción

Active differential probe, 3.0 GHz, Rohde & Schwarz probe interface

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.