WCDMA/HSPA+ digital standards

WCDMA/HSPA+ digital standards
Abrir Lightbox
WCDMA/HSPA+ digital standards, Screenshot

Key Facts

  • Uplink/downlink signal generation in line with 3GPP FDD Rel. 11
  • Including HSDPA, HSUPA and HSPA+ physical channels and features
  • Simulation of up to 4 base stations (BS) or mobile stations (MS)
  • Support of real-time operation for uplink and downlink channels
  • Test case wizard for easy test setup in line with 3GPP TS 25.141

WCDMA/HSPA+ signal generation

These digital standard options provide WCDMA/HSPA+ signal generation capabilities in line with 3GPP FDD Rel. 11. This includes all physical channels of 3GPP FDD, HSDPA, HSUPA and HSPA+.  All signals are generated either as a combination of the real-time and ARB modes or in ARB mode only (WinIQSIM2™).
Various test models and predefined settings are available to simplify signal generation as far as possible. Furthermore, a test case wizard ensures the easy setup of base station conformance tests. Various graphical displays and setting assistants also support fast and convenient signal configuration.

Features & benefits

Support of all physical channels

All WCDMA 3GPP FDD, HSDPA, HSUPA and HSPA+ physical channels are supported. This allows the simulation of up to:

  • Four base stations (BS) with up to 128 code channels each
  • Four configurable mobile stations (MS) and up to 128 additional MS with identical configuration in parallel

Main menu, base station settings (downlink)
Abrir Lightbox

Main menu, base station settings (downlink)

Perfect for BER and BLER measurements

In downlink mode, the P-CCPCH and up to three DPCH can be generated in real time. In uplink mode, real-time simulation is supported for DPCCH and one DPDCH of one mobile station. This allows a 3GPP conformant continuous measurement of BER and BLER in a code channel with PN data. Furthermore, bit and block error rate insertion is supported, enabling the verification of the  base station internal BER/BLER calculations. 

DPCH bit error insertion dialog
Abrir Lightbox

DPCH bit error insertion dialog

Test case wizard for easy setup of BS tests

The test case wizard supports the configuration of test signals in line with 3GPP TS 25.141 for base station conformance tests. It offers a selection of predefined settings for wanted and interfering signals based on the defined test cases.

Test case wizard main dialog
Abrir Lightbox

Test case wizard main dialog

Quick signal configuration

The predefined settings assistant allows quick signal generation for testing amplifiers and other components.
Downlink test models in line with 3GPP TS 25.141 are provided as predefined settings:

  • Test model 1 with 4/8/16/32/64 DPCH
  • Test model 2
  • Test model 3 with 4/8/16/32 DPCH
  • Test model 4
  • Test model 5 with 8/4/2 HS-PDSCH (in case of 4 HS-PDSCH with 4 or 14 DPCH)
  • Test model 6 with 8/4 HS-PDSCH

Predefined settings dialog
Abrir Lightbox

Predefined settings dialog

Graphical signal evaluation

Various graphical displays support fast and easy signal configuration/evaluation:

  • Code domain display with domain conflict indication
  • Channel graph
  • Graphical signal monitoring in real time (I and Q vs. time, frequency spectrum, vector diagram, CCDF and more), including marker functions

Code domain display, 4 HS-PDSCH and 4 DPCH
Abrir Lightbox

Code domain display, 4 HS-PDSCH and 4 DPCH

Support of HSPA and HSPA+ physical channels

Simulation of HSUPA and HSDPA physical channels, including HSPA+ features:

  • HSDPA H-Sets 1 to 12 with channel coding and user-editable H-Set configurations
  • MIMO support including HSDPA MIMO precoding and HS-DPCCH signaling for user equipment
  • HSUPA fixed reference channels (FRC) 1 to 8 with channel coding and HARQ feedback simulation
  • Higher order modulation schemes, 64QAM in downlink and 4PAM in uplink
  • Continuous packet connectivity (CPC) 

Excerpt from channel table of HSDPA H-Set 8
Abrir Lightbox

Excerpt from channel table of HSDPA H-Set 8

Tailored for BS/MS tests

Several other functions are needed for 3GPP standard conformant/compliant test setups:

  • Dynamic power control support in real-time mode for up to three DPCH in downlink and one mobile station in uplink are essential for RX tests that need closed-loop power control.
  • In the uplink, the output of the FRC HARQ processes can be controlled in real time using a feedback line from the DUT to allow base station performance tests in line with 3GPP TS 25.141.

HARQ feedback simulation for 3GPP BS tests.
Abrir Lightbox

HARQ feedback simulation for 3GPP BS tests.

Available models

R&S®SMW200A
Modelos
Description
Base unit

R&S®SMW-K42

Order Number 1413.3784.02

Description
3GPP FDD
Base unit

R&S®SMW-K83

Order Number 1413.4580.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests
Base unit

R&S®SMW-K242

Order Number 1413.4839.02

Description
3GPP FDD (WinIQSIM2™)
Base unit

R&S®SMW-K283

Order Number 1413.6290.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Base unit
R&S®SMM100A
Modelos
Description
Base unit

R&S®SMM-K42

Order Number 1441.2008.02

Description
3GPP FDD
Base unit

R&S®SMM-K83

Order Number 1441.1899.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests
Base unit

R&S®SMM-K242

Order Number 1441.1701.02

Description
3GPP FDD (WinIQSIM2™)
Base unit

R&S®SMM-K283

Order Number 1441.1547.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Base unit
R&S®SMBV100B
Modelos
Description
Base unit

R&S®SMBVB-K42

Order Number 1423.7747.02

Description
3GPP FDD
Base unit

R&S®SMBVB-K83

Order Number 1423.7899.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests
Base unit

R&S®SMBVB-K242

Order Number 1423.8189.02

Description
3GPP FDD (WinIQSIM2™)
Base unit

R&S®SMBVB-K283

Order Number 1423.8337.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Base unit
R&S®SMCV100B
Modelos
Description
Base unit

R&S®SMCVB-K242

Order Number 1434.4196.02

Description
3GPP FDD (WinIQSIM2™)
Base unit

R&S®SMCVB-K283

Order Number 1434.4473.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Base unit
R&S®SGT100A
Modelos
Description
Base unit

R&S®SGT-K242

Order Number 1419.6056.02

Description
3GPP FDD (WinIQSIM2™)
Base unit

R&S®SGT-K283

Order Number 1419.7100.02

Description
3GPP FDD HSPA/HSPA+, enhanced BS/MS tests (WinIQSIM2™)
Base unit

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Permiso de marketing

Se ha enviado su solicitud. Nos pondremos en contacto con usted lo antes posible.
An error is occurred, please try it again later.
Información general y jurídica

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Términos y condiciones del sorteo de premios con motivo del 10° aniversario de los osciloscopios de Rohde & Schwarz

1. El sorteo «10 años de osciloscopios de Rohde & Schwarz» (en adelante el «sorteo») está organizado por Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Múnich, Alemania, tel. +49 89 41 29 0 (en adelante «R&S»).

2. Todos los participantes pueden inscribirse en el sorteo entre el 1 de enero de 2020 y el 31 de diciembre de 2020 indicando su nombre, el nombre de su compañía y la dirección de correo electrónico empresarial.

3. La participación es gratuita y no está vinculada a la compra de bienes o servicios.

4. El sorteo está destinado únicamente a personas jurídicas, y solamente las personas jurídicas tienen facultad para recibir los premios. No está permitida la participación de una persona individual en su propio nombre y cuenta, sino que deberá hacerlo como representante de una persona jurídica rellenando el formulario de participación en nombre y por cuenta de dicha persona jurídica.

5. Los participantes pueden ganar uno de los 10 R&S®RTB2000 sorteados en el periodo entre el 1 de enero de 2020 y el 31 de diciembre de 2020:

Premio: 1 osciloscopio digital R&S®RTB2000

6. El sorteo se celebra en la sede central de R&S, Muehldorstrasse 15, 81671 Múnich (Alemania). Los ganadores de los premios serán informados por correo electrónico en un plazo de cinco (5) días laborables.

7. El representante autorizado de la persona jurídica deberá notificar a R&S que acepta el premio. En caso de denegar la aceptación o de no obtenerse respuesta en un plazo de dos (2) semanas, se sorteará un nuevo ganador. Si no puede determinarse un ganador en un espacio de cuatro (4) semanas, el sorteo se dará por finalizado y el premio se dará por perdido.

8. Los empleados de R&S, sus familiares, así como cualquier persona que esté implicada en el proceso del sorteo y sus familiares quedan excluidos de rellenar el formulario de participación.

9. No está permitido abonar el equivalente en metálico ni intercambiar los premios. Los premios son intransferibles. Todos los impuestos, gravámenes, tasas de aduana, cuotas y otros pagos exigidos en el país del participante correrán a cargo del participante.

10. Los datos personales se procesarán exclusivamente para los fines de este sorteo de premios y se eliminarán cuatro (4) semanas después de finalizar el mismo, salvo otro acuerdo.

11. R&S se reserva el derecho de descalificar del concurso a cualquier participante que no cumpla los presentes términos y condiciones. En estos casos, los premios también podrán retirarse con efecto retroactivo. En caso de retirarse un premio con efecto retroactivo como consecuencia del incumplimiento de los presentes términos y condiciones, el respectivo participante deberá devolverlo, corriendo con los gastos correspondientes, a la dirección de R&S indicada en el punto 1, y se sorteará un nuevo ganador.

12. Los participantes no tienen derecho a reclamar los premios de este sorteo, ni está previsto ningún recurso legal a este respecto.

13. El sorteo, y cualquier relación contractual que se derive del mismo entre R&S y el respectivo participante, se regirán e interpretarán según la legislación de Alemania, excluyendo todo recurso por conflictos de leyes. Los tribunales de Múnich, Alemania, tendrán la competencia exclusiva en caso de cualquier litigio relacionado directa o indirectamente con la participación en este concurso.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.