MIPI RFFE

Triggering and decoding

Oscilloscope-Software-RTx-K40-MIPI-RFFE-Triggering-and-Decoding_rffe_01
Open Lightbox
Oscilloscope-Software-RTx-K40-MIPI-RFFE-Triggering-and-Decoding-RTOK40_02
Open Lightbox
Oscilloscope-Software-RTx-K40-MIPI-RFFE-Triggering-and-Decoding_rffe_01 Oscilloscope-Software-RTx-K40-MIPI-RFFE-Triggering-and-Decoding-RTOK40_02

Key facts

  • Glitch rejection for receivers as allowed by the standard
  • Fully integrated in the GUI for fast setup
  • Hardware implementation for reliable triggering on events as start, stop, label, data and various error conditions
  • Label list support
  • Display of all decoded telegrams in a table
  • R&S oscilloscopes | Engineered for multi-domain challenges

Oscilloscope software

The R&S®RTO oscilloscope supports triggering and decoding of the MIPI-RFFE protocol. You can set up decoding in seconds. For detailed analysis, results can be viewed as color-coded telegrams and/or in a table. Errors are identified reliably and efficently using the hardware-accelerated trigger. You can trigger on start, stop, label and data and various error conditions.

Features & benefits

Fast bus setup

Bus setup in seconds from the app cockpit

Starting from the app cockpit, it only takes a few steps to configure any given protocol. Once the bus to decode has been chosen, the connected channels selected and the correct levels set, decoding begins automatically.

Oscilloscope - Serial Triggering and Decoding
Open Lightbox

Fast and easy configuration of MIPI-RFFE decoding.

Color-coded protocol details

Protocol display as color-coded bus signals and in decode table

You can analyze the decoded bus frames by overlaying the signal with color-coded data. Address and data content can be displayed in hex, bin or ASCII format. You always have the best overview with the flexible screen setup. The protocol details can also be displayed in a concise table. Select the data format and decode layer that best fits your analysis needs.

Oscilloscope - Serial Triggering and Decoding
Open Lightbox

Decoding details of the MIPI RFFE protocol displayed in the waveform and result table – select the data format and decoding layer.

Powerful trigger capabilities

Trigger on start, stop, label and data and various error conditions.

The protocol-specific trigger lets you reliably isolate protocol events and errors. Thanks to high acquisition rates, Rohde & Schwarz oscilloscopes are ideal for finding errors quickly, allowing decoding of protocol-specific trigger results. The hardware-based triggering is available on specific protocol content, e.g. addresses, data and protocol errors.

Oscilloscope - Serial Triggering and Decoding
Open Lightbox

Focus the triggering on the protocol detail of interest – select from a comprehensive list of MIPI RFFE protocol elements and configure the parameters.

Powerful search and navigate capability

Search and navigate in recorded acquisitions

Comprehensive search functions simplify the analysis of long signal sequences. You can search for waveforms based on different criteria, such as signal faults or protocol content. All detected events are shown in a table with timestamps. The individual events can be examined in a zoom window with simple navigation between events.

Oscilloscope - Serial Triggering and Decoding
Open Lightbox

Benefit from the powerful search capabilities to analyze long recordings.

Available models


  • Option Name

    R&S®RTP-K40

    Order number 1337.8733.02

    Serial Standard
    MIPI RFFE
    Decode Table
    Trigger
    Label Support
    Base unit
  • Option Name

    R&S®RTO-K40

    Order number 1329.7519.02

    Serial Standard
    MIPI RFFE
    Decode Table
    Trigger
    Label Support
    Base unit

More information

  • MIPI-D-PHY-Compliance-Test.jpg

    MIPI D-PHY Compliance Test

    This video shows the R&S®RTO-K26 MIPI D-PHY compliance test options which provides automated testing to the MIPI D-PHY standard for camera and display interfaces.

    More details

  • Triggering and decoding of low speed serial buses

    Triggering and decoding low-speed serial buses

    Illustrates how to trigger and decode I²C or SPI protocols with Rohde & Schwarz oscilloscopes

    More details

Oscilloscope portfolio

  • Oscilloscopes

    Oscilloscopes that fit your requirements and your budget, from top value to top performance.

    More information

  • Oscilloscope software

    Select from a wide range of protocol triggering and decode apps, compliance testing apps, and analysis software.

    More information

  • Oscilloscope probes

    Customize your oscilloscope with the right probes and accessories for your application.

    More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing permission

I want to receive information from Rohde & Schwarz via

What does this mean in detail?

I agree that Rohde & Schwarz GmbH & Co. KG and the Rohde & Schwarz entity or subsidiary company mentioned in the imprint of this website, may contact me via the chosen channel (email or postal mail) for marketing and advertising purposes (e.g. information on special offers and discount promotions) related to, but not limited to, products and solutions in the fields of test and measurement, secure communications, monitoring and network testing, broadcast and media, and cybersecurity.

Your rights

This declaration of consent may be withdrawn at any time by sending an email with the subject "Unsubscribe" to news@rohde-schwarz.com. Additionally, a link to unsubscribe from future email advertisements is contained in each email sent. Further details on the use of personal data and the withdrawal procedure are set out in the Statement of Privacy.

Your request has been sent successfully. We will contact you shortly.
An error is occurred, please try it again later.
General and legal information

Prices and offers are only intended for entrepreneurs and not for private end consumers.