Automotive digital design testing webinars

The massive increase of in-vehicle data-processing is a challenge for automotive networks and processors. Our dedicated webinars will support you with issue about CAN Bus or Automotive Ethernet debugging and compliance testing, as well as for performance, EMI and interoperability testing of ECUs and domain controllers in R&D and production.

Webinar: Domain controllers and CPUs

Domain controllers and high performance CPUs for automotive

Testing and debugging Automotive domain controllers / high performance CPUs on their in-vehicle network interfaces, their performance and interoperability.

Register now and watch the free webinar.

1000BASE-T1 automotive Ethernet compliance testing

1000BASE-T1 automotive Ethernet compliance testing

This webinar will focus on 1000BASE-T1 automotive Ethernet compliance testing based on the Open Alliance (OA) TC8 specification for the physical layer. We will discuss the individual test cases for 1000BASE-T1 and look at the pitfalls that an engineer might encounter during test setup and execution.

Webinar: Automotive EMI testing overview and updates - CISPR 25 introduction

Automotive EMI testing overview and updates - CISPR 25 introduction

This webinar provides an overview of CISPR and new developments in CISPR product standards for emission measurements.

Ready for RED - Part 1

Ready for RED - Part 1

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED),that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Ready for RED – Part 2: DAB car radio testing with the R&S®BTC

Ready for RED – Part 2: DAB car radio testing with the R&S®BTC

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED), that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to ensure they meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). We will demonstrate, step by step, how to perform audio measurements on a DAB car radio receiver with the R&S®BTC for EN 303 345 compliance testing.

Ready for RED – Part 3: Quasi Peak measurements on FM radios according to EN 303 345

Ready for RED – Part 3: Quasi Peak measurements on FM radios according to EN 303 345

The ETSI has specified a new mandatory test requirement, the radio equipment directive (RED), that applies to radio and television broadcast receivers sold into Europe. From June 13, 2017 on, all manufacturers have to test their entertainment systems to meet the ETSI harmonized standards EN 303 340 (digital TV broadcast receivers) and EN 303 345 (radio broadcast receivers). The R&S®BTC broadcast test center from Rohde & Schwarz offers the turnkey solution in a single box.

Automotive Ethernet Measurements using Oscilloscopes

Automotive Ethernet Measurements using Oscilloscopes

In this webinar you will get an overview of Automotive Ethernet Technologies. You will get more information about the OPEN Alliance and how to easily perform the required tests. We will explain how to capture and decode electrical signals in a full duplex communication.

Related webinar series

Automotive radar testing webinars

More information

Automotive connectivity testing webinars

More information

Webinar overview

More information

Solutions for

Demander des informations

Vous avez des questions ou besoin d'informations supplémentaires ? Remplissez simplement ce formulaire et nous vous recontacterons rapidement.

Je souhaite recevoir des informations de Rohde & Schwarz via

Marketing de permission

Qu'est ce que cela signifie en détail ?

Je reconnais que les entités ROHDE & SCHWARZ GmbH & Co. KG et ROHDE & SCHWARZ ou toute autre société subsidiaire mentionnée au sein de ce site Internet, peuvent me contacter par le moyen de leur choix (email ou courrier) pour des raisons marketing et publicitaires (par exemple pour des informations sur des offres spéciales et des promotions) en relation avec, mais pas uniquement, des produits et des solutions dans les domaines du test et mesure, des communications sécurisées, de la surveillance et test des réseaux, des broadcasts et médias, ainsi que de cybersécurité.

Vos droits

Cette déclaration de consentement peut être révoquée à tout moment par l'envoi d'un courriel portant, dans son objet, la mention "Unsubscribe" (désinscription) à news@rohde-schwarz.com. En outre, chaque courriel envoyé contient un lien vers une fonction de désinscription de publicités ultérieures adressées par courrier électronique. La "Déclaration de confidentialité" expose plus en détail l'utilisation des données personnelles, ainsi que la procédure de révocation de consentement.

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.