R&S®ESMD Wideband monitoring receiver

R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD Wideband monitoring receiver
Open Lightbox
R&S®ESMD wideband monitoring receiver, front viewR&S®ESMD wideband monitoring receiver, front viewR&S®ESMD wideband monitoring receiver, side viewR&S®ESMD wideband monitoring receiver, back viewR&S®ESMD wideband monitoring receiver, front viewR&S®ESMD wideband monitoring receiver, side view

Key Facts

  • High-performance spectrum monitoring from 8 kHz to 26.5 GHz (with options)
  • Accurate AoA direction finding from 300 kHz to 8.5 GHz (with options)
  • Reliable detection of weak signals in dense spectrum environments
  • Cutting-edge signal measurements in the frequency and time domain (option)
  • Performance and device testing in line with ITU recommendations

Premium-class signal reception and analysis

The R&S®ESMD wideband monitoring receiver was especially designed for signal search, radiomonitoring, radio detection and spectrum monitoring. It performs ITU-compliant measurements and meets public safety and security requirements. The receiver is ideal for both stationary and mobile/vehicular applications because it can be operated locally from the front panel or remotely controlled via LAN.

Caractéristiques & avantages

Superior RF performance in dense spectrum environments

The R&S®ESMD makes an excellent trade-off between linearity and sensitivity and can reliably detect weak signals among strong unwanted ones in crowded spectra. Preselection filtering including filter banks and tunable bandpass filters over the entire frequency range protect against intermodulation from strong out-of-band signals.

ITU-compliant measurements

R&S®ESMD performance is in line with all relevant ITU-R recommendations. The optional R&S®ESMD-IM option allows for ITU-compliant measurements of signal parameters such as bandwidth, center frequency and modulation depth.

 

Cutting-edge signal measurements

The R&S®ESMD has a comprehensive tool set for any signal measurement:

  • Parallel time and frequency analysis in zero span mode
  • Polychrome spectrum for detecting superimposed pulsed signals
  • Trace recording and replay
  • Automatic record and replay of I/Q data under various trigger conditions 
  • Parallel multichannel signal analysis and detection with R&S®CA120;

Direction finding and radiolocation

The R&S®ESMD is the basis of a precise direction finding or radiolocation system:

  • Accurate angle-of arrival (AoA) direction finding with R&S®ADDx single channel DF antennas
  • Mapping functions with automatic triangulation
  • AoA DF error correction
  • Support of TDOA with internal GNSS module

Available models

Available models
Modèles
Description
R&S®ESMD

R&S®ESMD

Numéro de commande 4066.0004.02

Description
Wideband monitoring receiver without front panel display (frequency range from 20 MHz to 26.5 GHz and 20 MHz real-time bandwidth)
R&S®ESMD

R&S®ESMD

Numéro de commande 4066.0004.03

Description
Wideband monitoring receiver with front panel display (frequency range from 20 MHz to 26.5 GHz and 20 MHz real-time bandwidth)

Available options

Hardware options
Produit
Désignation
R&S®ESMD-HF

Numéro de commande 4066.4100.02

Désignation

HF frequency range extension

Extension of frequency range to 8 kHz for monitoring and 300 kHz for direction finding

R&S®ESMD-ADC2

Numéro de commande 4079.7925.02

Désignation

Multifunction board

Additional integrated ADC board for wideband and multifunction processing

R&S®ESMD-SP

Numéro de commande 4066.4268.02

Désignation

Signal processing board

Integrated signal processing board for parallel multichannel signal detection and analysis

R&S®ESMD-DIQ

Numéro de commande 4079.8109.02

Désignation

Digital I/Q interface

Interface for wideband I/Q data streaming

R&S®RX-10G

Numéro de commande 4074.7604.04

Désignation

10 Gbit Ethernet interface

Wideband I/Q data streaming interface

R&S®ESMD-DF

Numéro de commande 4066.4300.02

Désignation

Direction finding upgrade

Direction finding for all signals within the real-time bandwidth

R&S®ESMD-IGT2

Numéro de commande 4079.8209.02

Désignation

Internal GNSS module 

Integrated GNSS module incl. GPS, Glonass, BeiDou for positioning and accurate timestamps, e.g. for TDOA

R&S®ESMD-SSD

Numéro de commande 4079.7048.02

Désignation

Internal SSD

Internal SSD drive for additional storage capacity

R&S®ESMD-DC

Numéro de commande 4066.4000.12

Désignation

DC power supply

Additional integrated DC power supply for vehicle operation

Software options
Produit
Désignation
R&S®ESMD-PS

Numéro de commande 4066.4500.02

Désignation

Panorama scan

Fast spectrum/monitoring scan over the entire frequency range

R&S®ESMD-MAP

Numéro de commande 4079.7977.02

Désignation

Map display

Display of measurement results on a map for R&S®ESMD with front panel control

R&S®ESMD-IM

Numéro de commande 4066.4400.02

Désignation

ITU measurements

Signal measurements in line with ITU recommendations

R&S®ESMD-ZS

Numéro de commande 4079.7983.02

Désignation

Time domain analysis

Simultaneous frequency and time domain analysis 

R&S®ESMD-SL

Numéro de commande 4066.4600.02

Désignation

Selective call analysis

Decoding/demodulation of varius selective call methods and pagers

R&S®ESMD-WB

Numéro de commande 4066.4645.02

Désignation

80 MHz IF panorama bandwidth

Increased real-time bandwidth to 80 MHz for monitoring

R&S®ESMD-DDCE

Numéro de commande 4079.7760.02

Désignation

DDC signal extraction

Parallel multichannel DDC output of up to 128 channels

R&S®ESMD-HRP

Numéro de commande 4079.7902.02

Désignation

High-resolution panorama spectrum

High-resolution spectrum calculation for detection of fixed frequency signals

R&S®ESMD-ST

Numéro de commande 4079.7883.02

Désignation

Detection of short-time signals

Automatic detection of short-time signals within the real-time bandwidth based on selected criteria

R&S®ESMD-COR

Numéro de commande 4066.4745.02

Désignation

DF error correction

Support of look-up table DF error correction; calibration service not included

R&S®ESMD-IR

Numéro de commande 4079.7960.02

Désignation

Internal recording

Recording and replay of spectrum, measurement results and audio on the internal memory

R&S®ESMD-DDC

Numéro de commande 4066.4545.02

Désignation

Digital down converter

Four additional digital downconverters within the real-time bandwidth

R&S®ESMD-RR

Numéro de commande 4079.7954.02

Désignation

Record and replay

Internal wideband I/Q data recording and replay with frequency mask trigger

Direction finding antennas
Produit
Désignation

Numéro de commande 4069.6603.12

Désignation

UHF/SHF DF antenna

1.3 GHz to 8.2 GHz; vertical polarization; for installation on a vehicle roof, tripod or mast; passive antenna elements

Numéro de commande 4109.0000.02

Désignation

Wide aperture VHF DF antenna

20 MHz to 450 MHz; vertical polarization; for installation on a mast; active antenna elements with active-passive switch

Numéro de commande 4090.7005.02

Désignation

Compact VHF/UHF DF antenna

20 MHz to 1.3 GHz; vertical polarization; for installation on a vehicle roof or tripod; active antenna elements

Numéro de commande 4053.6509.02

Désignation

Mobile HF DF antenna

300 kHz to 30 MHz; vertical polarization; for installation on a vehicle roof or tripod

Numéro de commande 4068.1450.12

Désignation

Dual-polarization VHF/UHF DF antenna

20 MHz to 1.3 GHz; vertical and horizontal polarization (40 MHz to 1.3 GHz); for installation on a vehicle roof, tripod or mast

Numéro de commande 4096.0002.02

Désignation

Compact UHF/SHF DF antenna

600 MHz to 6 GHz; vertical polarization; for installation on a vehicle roof or tripod; passive antenna elements

Numéro de commande 4096.0002.12

Désignation

Compact passive UHF/SHF DF antenna

600 MHz to 6 GHz ; vertical polarization; for installation on a vehicle roof or tripod, entirely passive from 600 MHz to 2.9 GHz

Numéro de commande 4098.2002.07

Désignation

Collapsible VHF/UHF DF antenna

20 MHz to 690 MHz; vertical polarization; for installation on a tripod or portable mast; active antenna elements

Désignation

VHF/UHF DF antenna

20 MHz to 690 MHz; vertical polarization; for installation on a mast

Downconverter
Produit
Désignation

Numéro de commande 4098.6008.02

Désignation

Microwave converter 40 GHz

External microwave downconverter for the extension of the monitoring frequency range to 40 GHz

Cable sets for DF
Produit
Désignation
R&S®ADD17XZ4

Numéro de commande 4090.8730.02

Désignation

DF antenna cable set for compact DF antennas, length: 5 m

R&S®DDF1C-1

Numéro de commande 4077.6009.05

Désignation

DF antenna cable set for the frequency range up to 1.3 GHz, length 5 m

R&S®DDF1C-5

Numéro de commande 4077.7005.05

Désignation

DF antenna cable set for the frequency range up to 3 GHz, length 5 m

R&S®DDF1C-7

Numéro de commande 4077.8001.95

Désignation

DF antenna cable set for the frequency range up to 8.2 GHz, length 5 m

R&S®DDF1C-7

Numéro de commande 4077.8001.91

Désignation

DF antenna cable set for the frequency range up to 8.2 GHz, length 10 m

Rack adapter
Produit
Désignation
R&S®ZZA-411

Numéro de commande 1096.3283.00

Désignation

19" Rack adapter

For mounting a 19" housing 4 RU high in a standard 19" rack

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.