R&S®FSV-K54 EMI Measurement Application

Finding, classifying and eliminating electromagnetic interference

To EMI measurement application

Vue d'ensemble

Key facts

EMI bandwidths for commercial and military standards
Standard EMI detectors: quasi-peak, CISPR‑average, RMS-average
Linking of measurement markers to various EMI detectors

Brief description

The R&S^®FSV-K54 EMI measurement application adds EMI diagnostic functionality to the R&S^®FSV and R&S^®FSVA signal and spectrum analyzer and the R&S^®FSVR real-time spectrum analyzer. The R&S^®FSV-K54 offers EMI bandwidths for commercial and military applications, detectors such as quasi-peak, CISPR-average and RMS-average, limit lines and correction factors.
All electronic devices must be tested for electromagnetic compatibility (EMC) before market approval. The ability to assess and influence the EMC behavior of products during the design phase is one of the critical factors in developing a successful product. Preventing expensive product redevelopment and performing smooth certification help to ensure a timely market launch.

Features & Benefits

Flexible allocation of EMI detectors such as quasi-peak, CISPR-average and RMS-average as well as allocation of peak and average detectors to different traces
Fast, easy-to-read diagnostic measurements with high result reproducibility
Easy detection of critical disturbance signal amplitudes

Diagnostic measurements during development deliver the correct amplitude of the disturbance signal thanks to the 6 dB bandwidths (CISPR from 200 Hz to 1 MHz, MIL-STD from 10 Hz to 1 MHz)

Markers can be placed on the frequency of an disturbance signal to make targeted analysis easier
The ability to link markers to up to six traces and an associated EMI detector provides users with a direct reference to the limits
Automatic searching for disturbance maxima for reliable detection of time-varying interferers
Critical frequencies are entered in a peak list for fast evaluation of a frequency spectrum with respect to official EMI emission limits

Fast and reliable identification of AM and FM signals

Selection of limit lines that meet international standards
Easy generation, editing and use of customer-specific limit lines
Fast pass-fail test using activated limit lines

Database with correction value tables for EMI accessories such as antennas, clamps, line impedance stabilization networks (LISN), pulse limiters, preamplifiers, cables and attenuators
Easy generation, editing and storage of new correction tables
High accuracy by including correction values for frequency-dependent accessories in the trace
Combination of several correction tables possible, for example, for an antenna, a cable and a preamplifier, to compensate for the entire test setup

The spectrum display with logarithmic frequency axis makes it easy to analyze measurement results over a wide frequency range and allows to display limit lines in accordance with standards

Key facts

EMI bandwidths for commercial and military standards
Standard EMI detectors: quasi-peak, CISPR‑average, RMS-average
Linking of measurement markers to various EMI detectors
Limit lines and transducers for typical measurement tasks
Choice of linear or logarithmic scale on frequency axis

Brief description

Features & Benefits

EMI detectors in line with CISPR 16-1-1
- Flexible allocation of EMI detectors such as quasi-peak, CISPR-average and RMS-average as well as allocation of peak and average detectors to different traces
- Fast, easy-to-read diagnostic measurements with high result reproducibility
- Easy detection of critical disturbance signal amplitudes
Measurement bandwidths in line with CISPR and MIL-STD
- Diagnostic measurements during development deliver the correct amplitude of the disturbance signal thanks to the 6 dB bandwidths (CISPR from 200 Hz to 1 MHz, MIL-STD from 10 Hz to 1 MHz)
Measurement marker for evaluating EMI
- Markers can be placed on the frequency of an disturbance signal to make targeted analysis easier
- The ability to link markers to up to six traces and an associated EMI detector provides users with a direct reference to the limits
- Automatic searching for disturbance maxima for reliable detection of time-varying interferers
- Critical frequencies are entered in a peak list for fast evaluation of a frequency spectrum with respect to official EMI emission limits
Marker demodulation
- Fast and reliable identification of AM and FM signals
EMI limit lines
- Selection of limit lines that meet international standards
- Easy generation, editing and use of customer-specific limit lines
- Fast pass-fail test using activated limit lines
Frequency-dependent correction value tables
- Database with correction value tables for EMI accessories such as antennas, clamps, line impedance stabilization networks (LISN), pulse limiters, preamplifiers, cables and attenuators
- Easy generation, editing and storage of new correction tables
- High accuracy by including correction values for frequency-dependent accessories in the trace
- Combination of several correction tables possible, for example, for an antenna, a cable and a preamplifier, to compensate for the entire test setup
Logarithmic spectrum display
- The spectrum display with logarithmic frequency axis makes it easy to analyze measurement results over a wide frequency range and allows to display limit lines in accordance with standards

Obtenir une démonstration

Demande d'informations*

Prénom*

Nom*

Courrier électronique*

Entreprise*

Ville*

Code postal*

Pays*

Marketing de permission

Je souhaite recevoir des informations de Rohde & Schwarz via

courrier électronique

courrier postal

Qu'est ce que cela signifie en détail ?

Je reconnais que les entités ROHDE & SCHWARZ GmbH & Co. KG et ROHDE & SCHWARZ ou toute autre société subsidiaire mentionnée au sein de ce site Internet, peuvent me contacter par le moyen de leur choix (email ou courrier) pour des raisons marketing et publicitaires (par exemple pour des informations sur des offres spéciales et des promotions) en relation avec, mais pas uniquement, des produits et des solutions dans les domaines du test et mesure, des communications sécurisées, de la surveillance et test des réseaux, des broadcasts et médias, ainsi que de cybersécurité.

Vos droits

Cette déclaration de consentement peut être révoquée à tout moment par l'envoi d'un courriel portant, dans son objet, la mention "Unsubscribe" (désinscription) à news@rohde-schwarz.com. En outre, chaque courriel envoyé contient un lien vers une fonction de désinscription de publicités ultérieures adressées par courrier électronique. La "Déclaration de confidentialité" expose plus en détail l'utilisation des données personnelles, ainsi que la procédure de révocation de consentement.

Veuillez saisir les caractères présentés sur l'image.

Email confirmation

Obtenir un devis

Demande d'informations*

Prénom*

Nom*

Courrier électronique*

Entreprise*

Ville*

Code postal*

Téléphone*

Pays*

Marketing de permission

Je souhaite recevoir des informations de Rohde & Schwarz via

courrier électronique

courrier postal

Qu'est ce que cela signifie en détail ?

Vos droits

Veuillez saisir les caractères présentés sur l'image.

Email confirmation

Demander des informations

Demande d'informations*

Prénom*

Nom*

Courrier électronique*

Entreprise*

Ville*

Code postal*

Pays*

Marketing de permission

Je souhaite recevoir des informations de Rohde & Schwarz via

courrier électronique

courrier postal

Qu'est ce que cela signifie en détail ?

Vos droits

Veuillez saisir les caractères présentés sur l'image.

Email confirmation

Nous contacter

Obtenir un devis Obtenir une démonstration Obtenir des informations

Téléchargements