R&S®NGM200 Power supply series

A high-precision power supply from R&S Essentials

R&S®NGM200 power supply series, Battery Simulation

Key Facts

Max. output power: 120 W
Voltage per channel: 0 V to 20 V
Max. current per channel: 6 A
500 ksample/s high-speed data logging
Intuitive, price-transparent online product configurator

Commençant à 4 040 EUR

Configurer le produit et établir un devis

High-speed accuracy

R&S®NGM200 DC power supplies have high accuracy and fast load recovery times. Their two-quadrant architecture allows these DC power supplies to function both as a source and a sink to simulate batteries and loads. Short recovery times let the R&S®NGM200 handle fast load changes when mobile communications devices switch between sleep and transmit modes. High-speed data acquisition and convenient battery simulation widen the range of applications to:
- battery tests
- simulation of voltage drops
- power consumption test
- supplying sensitive designs
Choose the power supply you need by selecting the base unit and all the necessary options in our online configurator. It is easy, fully price transparent and ensures fast processing of your order request through our wide network of distribution partners. Click "Configure and quote" to start configuration.

Fiche technique
Montrer tous les téléchargements

Quick Links

Indiquer les modèles disponibles
Indiquer les options disponibles

Caractéristiques & avantages

Battery simulation

with the R&S®NGM-K106

Real batteries show different characteristics depending on the type of battery and its charging condition. Capacity, open circuit voltage (Voc) and equivalent series resistance (ESR) are important battery characteristics that depend on the state of charge (SoC). The optional R&S®NGM-K106 functionality allows users to simulate the behavior of batteries under different charging conditions, e.g. when powering a DUT.

**Battery simulation** - The main parameters for characterizing the condition of a battery are summarized in one display.

High-speed acquisition

FastLog function

R&S®NGM200 power supplies have the high-speed FastLog function to capture voltage and current measurement results. This data can be stored on an external USB storage device or transferred to an external PC via USB or LAN. With an acquisition rate of up to 500 ksample/s, voltage and current results are available every 2 µs. The two-channel R&S®NGM202 can run data acquisition on both channels in parallel. The high-speed acquisition can even detect the minimum/maximum values for spikes in the microsecond range that slower instruments cannot.

Digital voltmeter function

with R&S®NGM-K104

Like other power supplies, R&S®NGM200 instruments measure voltage supplied to the DUT. The R&S®NGM-K104 option activates a port allowing the internal digital voltmeter to be connected to any other point in a customer’s circuit. An additional digital multimeter is often not necessary.

**Digital voltmeter function (DVM)** - The internal digital voltmeter in R&S®NGM200 power supplies can be used to measure at any point in the customer’s circuit.

6 ½ digit resolution

replaces an additional DMM

With a resolution of up to 6 ½ digits when measuring voltage, current and power, the R&S®NGM200 power supply series is ideal for characterizing devices with low standby power consumption and high current in full load operation. Two voltage measurement ranges and four ranges to measure current provide high accuracy and resolution down to 1 µV/10 nA.

**6 ½ digit resolution in V/I metering** - The measured currents and voltages are displayed with 6 ½ digit resolution.

Fast load regulation

handles fast load changes

Consumer electronics such as mobile phones and IoT devices require very little power in sleep mode. However, the current increases abruptly as soon as the device switches to transmit mode. A power supply for such DUTs must handle load changes from a few µA to the ampere range without creating voltage drops or overshoots.

**Exceptionally fast load recovery time** - Power supplies usually respond to abrupt load changes with overshoot and slow recovery times. Thanks to specially optimized control circuits, R&S®NGM200 power supplies have recovery times of < 30 µs.

Minimum residual ripple and low noise

< 500 µV_(RMS) / < 2 mV (peak-to-peak)

Advanced electronic circuitry is often very complex and sensitive to supply line interference. To supply interference-free voltage to sensitive DUTs, power supplies must provide extremely stable output voltage and current. All forms of ripple and noise must be avoided. R&S®NGM200 power supplies have linear regulation and are ideal for sensitive DUTs.

Two quadrant operation

operated as source and sink

The two-quadrant power supply architecture can function both as a source and a sink to simulate batteries or loads. The power supply automatically switches from source mode to sink mode. As soon as the externally applied voltage exceeds the set nominal voltage, current flows into the power supply. This is indicated by a negative current reading.

**Source and sink mode** - In the example, channel 2 is operating as a load. This is indicated by a negative current reading.

Easy to use, price transparent configurator

We help customers choose the right T&M instrument quickly, easily and with full price transparency. The R&S®NGM200 and other instruments in the R&S Essentials portfolio can now be configured online for the following:
- User-friendly and easy to navigate configurator
- Full cost transparency at every step of configuration
- Fast order processing through authorized distribution partners
- Next-day delivery from selected partners

Available models

Specifications

Electrical specifications
Number of output channels	1/2
Total output power	max. 60 W/120 W
Maximum output power per channel	60 W
Output voltage per channel	0 V to 20 V
Maximum output current per channel	≤ 6 V: 6 A > 6 V: 3 A
Voltage ripple and noise (20 Hz to 20 MHz)	< 500 µV (RMS) < 2 mV (peak-to-peak) (meas.)
Current ripple and noise (20 Hz to 20 MHz)	< 1 mA (RMS) (meas.)
Load recovery time (10 % to 90 % load change within a band of ± 20 mV of set voltage)	< 30 µs
Programming resolution voltage	1 mV
Programming resolution current	0.1 mA
Output measurements
Readback resolution voltage	20 V range: 20 µV 5 V range: 5 µV
Readback resolution current	10 A range: 20 µA 1 A range: 2 µA 100 mA range: 200 nA 10 mA range: 20 nA
Readback accuracy voltage ± (% of output + offset)	20 V range: < 0.02 % + 2 mV 5 V range: < 0.02 % + 500 µV
Readback accuracy current ± (% of output + offset)	10 A range: < 0.05 % + 2.5 mA 1 A range: < 0.05 % + 1 mA 100 mA range: < 0.05 % + 100 µA 10 mA range: < 0.05 % + 15 µA
Special functions
Measurement functions	voltage, current, power, energy
Protection functions	OVP, OCP, OPP, OTP
FuseLink function	●
Fuse delay at output-on	●
Sense function	●
Sink mode	●
Output sequencing	●
Trigger input/output	●
Arbitrary function	● (QuickArb)
Analog/modulation interface	-
Data logging	● (Standard and FastLog)
Display and interfaces
Display	TFT 5" 800 pixel x 480 pixel WVGA touch
Rear panel connections	Connector block with 4 lines per channel
Remote control interfaces: standard	USB, LAN
Remote control interfaces: optional	Wireless LAN, IEEE-488 (GPIB)
General data
Dimensions (W × H × D)	222 mm × 97 mm × 436 mm
Weight	7.2 kg/7.4 kg
Rack installation	R&S®HZN96 option

Available options

Feature videos

Webpage, VNC & FTP on R&S®DC Power Supplies

Learn how easy it is to control and operate our instrument from any location via ethernet-based remote services

High Precision Power Supplies

The R&S®NGM/L/U come with a linear design, 2 or 4-quadrant operation, high readback resolution, and advanced functionalities.

Key features

The R&S®NGM200 power supply series features battery simulation, a built-in DVM, high accurracy measurements and high speed logging capabilties.

Integrated digital voltmeter

The R&S®NGM-K104 option activates a port that allows the internal digital voltmeter to be connected to any other point in the customer's circuitry.

Battery simulation

The battery simulation function of the R&S®NGM200 makes it possible to simulate the real battery output performance.

DC Supplies and Component analysis promotion

Maximize your bench performance and benefit from more than 19% of of fully equipped DC power supplies.

More information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Mr.

Ms.

No information

First name

Last name

E-mail

Company

Country

Phone (e.g. +1 400 123 5678)

Zip

City

Inquiry

Email confirmation (optional)

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.

An error is occurred, please try it again later.

Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.

R&S®NGM200 Power supply series

A high-precision power supply from R&S Essentials

High-speed accuracy

Caractéristiques & avantages

Battery simulation

High-speed acquisition

Digital voltmeter function

6 ½ digit resolution

Fast load regulation

Minimum residual ripple and low noise

Two quadrant operation

Easy to use, price transparent configurator

Available models

R&S®NGM201

R&S®NGM202

Available options

Related Downloads

DC Supplies and Component analysis promotion

R&S®NGL200

R&S®HMC8015

R&S®NGU