ZPH R&S®Cable Rider

Expect fast, expect efficient

ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
ZPH R&S®Cable Rider
Open Lightbox
R&S®ZPH Cable Rider, front view R&S®ZPH Cable Rider, side view R&S®ZPH Cable Rider, side view R&S®ZPH Cable Rider, back view R&S®ZPH Cable Rider, side view R&S®ZPH Cable Rider, application Image

Key Facts

  • Frequency range up to 3 GHz or 4 GHz, upgrade via keycode
  • One-port model features: DTF, return loss, VSWR and cable loss measurements
  • Two-port model additionally features S21 measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation
  • Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)

Commençant à 4 090 EUR

Brief description

The R&S®Cable Rider ZPH has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field. Its unique features ensure fast and efficient cable and antenna measurements and spectrum analysis. Two different R&S®ZPH models meet different needs: a pure one-port cable and antenna analyzer and a two-port model with additional spectrum analysis and tracking generator features.

Caractéristiques & avantages

Fast

Fast operation with the R&S®Cable Rider ZPH  

The R&S®Cable Rider ZPH boots up in less than 15 seconds and only needs 1 minute to warm up and can therefore begin measurement almost instantly.
The analyzer’s extremely fast measurements are the best in its class. The configuration overview menu allows you to view and change all parameter settings with just one keystroke. The fast synthesizers in the analyzer speed up measurements to 0.3 milliseconds per point.

Set parameters quickly in the overview menu
Open Lightbox

Set parameters quickly in the overview menu

Ideal for fast base station installation and maintenance: the R&S®Cable Rider ZPH

Efficient

Efficient operation with the R&S®Cable Rider ZPH  

Downtime-free operation is efficient operation.
With a single full charge, the R&S®Cable Rider ZPH lasts an entire working day without needing to recharge or change the batteries.
If tasks require additional options, these can be purchased and activated without needing to send the analyzer to the service lab for an upgrade or recalibration.

Efficient operation with the R&S®Cable Rider ZPH
Open Lightbox

Efficient operation with the R&S®Cable Rider ZPH

R&S®Cable Rider ZPH with the R&S®ZN-Z103 calibration unit

Cable and antenna tester

Key capabilities for base station installation  

All R&S®Cable Rider ZPH models share the same cable and antenna testing DNA: distance-to-fault, VSWR and one port cable loss measurement are supported, as well as phase and Smith chart displays for measurements.

R&S®Cable Rider ZPH
Open Lightbox

R&S®Cable Rider ZPH

Base station maintenance with the R&S®Cable Rider ZPH

Spectrum analyzer

Additional features for spectrum analysis  

Field engineers often need multiple instruments to complete their tasks: a cable and antenna analyzer, a spectrum analyzer, a signal generator and a bias source. All can now be found in a single powerful box with the added features of the R&S®Cable Rider ZPH combi analyzer (model .12.) The spectrum analyzer model also contains further measurement features, such as interference analysis and signal strength mapping.

R&S®Cable Rider ZPH with R&S®HA-Z900
Open Lightbox

R&S®Cable Rider ZPH with R&S®HA-Z900

Interference hunting with R&S®Cable Rider ZPH and directional antenna R&S®HA-Z900

Calibration

One-step calibration  

Calibration is only recommended if there are additional cables or adapters connected in between the analyzer and the device under test (DUT). This eliminates any influences on the measurement.
For convenient, one-step calibration, the R&S®ZN-Z103 calibration unit automatically switches internally between OPEN, SHORT and LOAD. This saves time and eliminates the hassle of physically changing the different calibration standards in the field.

R&S®ZN-Z103 calibration unit
Open Lightbox

R&S®ZN-Z103 calibration unit

Portability

Weighs only 2.5 kg  

With its ergonomic design, the R&S®Cable Rider ZPH has a small form factor and is lightweight. It comes with a convenient side strap to support your hand during the short measurement period. For hands-free operation, the holster (R&S®HA-Z322) comes with a harness that is carefully designed to equally distribute the weight around the body.

Hands-free operation with the R&S®HA-Z322 holster
Open Lightbox

Hands-free operation with the R&S®HA-Z322 holster

Durability

A single charge lasts for a day’s work  

The R&S®Cable Rider ZPH will operate for an entire working day on a single charge. Simply charge it for approximately 4 hours and the lithium-ion battery pack will last up to 9 hours. The advantages of long battery life are obvious: the weight of an extra battery can be saved when climbing up a mast or tower and there’s no frustration due to the battery running out during a measurement.

Handheld analyzer battery operation time
Open Lightbox

Handheld analyzer battery operation time

R&S®Cable Rider ZPH lasts longer then any other handheld analyzer on a single charge

Usability

Touchscreen gestures, non-reflective screen and backlit keypad  

To enhance user experience, the user interface operates like a smartphone. The touchscreen is not limited to the menu bar; it also allows users to move the spectrum, zoom in and out of the span, add/delete markers, etc.

Non-reflective screen and backlit keypad
Open Lightbox

Non-reflective screen and backlit keypad

The non-reflective screen makes outdoor work easier even in bright sunlight and you can also continue working though the night or under dim conditions thanks to the backlit keypad

Available models

Available models
Modèles
Ports
Connectors
Commençant à

R&S®ZPH

Numéro de commande 1321.1211K02

Ports
1.0
Connectors
N-type
Commençant à
Prix sur demande

R&S®ZPH

Numéro de commande 1321.1211K12

Ports
2.0
Connectors
N-type
Commençant à
Prix sur demande
Specifications
Frequency range
R&S®Cable Rider ZPH (1-port model .02) 2 MHz to 3 GHz
with R&S®ZPH-B4 option 2 MHz to 4 GHz
R&S®Cable Rider ZPH (2-port combi model .12) with R&S®ZPH-K1 option 5 kHz to 3 GHz
with R&S®ZPH-B4 and R&S®ZPH-K1 options 5 kHz to 4 GHz
Frequency resolution 1 Hz
Spectrum measurement with combi model .12 only, with R&S®ZPH-K1 option
Spectral purity, SSB phase noise f = 500 MHz, carrier offset 30 kHz < –88 dBc (1 Hz), typ. –95 dBc (1 Hz)
f = 500 MHz, carrier offset 100 kHz < –98 dBc (1 Hz), typ. –105 dBc (1 Hz)
f = 500 MHz, carrier offset 1 MHz < –118 dBc (1 Hz), typ. –125 dBc (1 Hz)
Displayed average noise level (DANL) 0 dB RF attenuation, termination 50 Ω, RBW = 1 kHz, VBW = 10 Hz, sample detector, log scaling, normalized to 1 Hz
frequency preamplifier = off
1 MHz to 10 MHz < –130 dBm, typ. –135 dBm
10 MHz to 1 GHz < –142 dBm, typ. –146 dBm
1 GHz to 4 GHz < –140 dBm, typ. –144 dBm
frequency preamplifier = on
1 MHz to 10 MHz < –150 dBm, typ. –160 dBm
10 MHz to 3 GHz < –158 dBm, typ. –163 dBm
3 GHz to 4 GHz < –156 dBm, typ. –161 dBm
Maximum permissible spurious signal
Maximum permissible spurious signal measurement = reflection (S11)/one-port cable loss/distance-to-fault analysis +17 dBm (nom.)
Data points selectable 101 to 2501
Reflection measurement S11
Corrected directivity with R&S®ZN-Z103 2 MHz ≤ f ≤ 4 GHz (with R&S®ZPH-B4 option installed) > 42 dB (nom.)
Measurement speed 0.3 ms/point
Result formats magnitude, VSWR, magnitude and distance-to-fault, VSWR and distance-to-fault
1-port cable loss measurement
Result format magnitude
Range selectable 1/2/5/10/20/50/100/120/150 dB
Distance-to-fault analysis
Result formats return loss (dB), VSWR
Fault resolution (1.5 m × 108 m × velocity factor/span)
Maximum cable length depending on cable loss 1500 m (nom.)
Maximum rated input levels
DC voltage 50 V
CW RF power model .02: port 1 (power meter input) 30 dBm
model .12: port 1 (RF input) 20 dBm
port 2 (reflectometer input) 23 dBm
General data
Display resolution WVGA 800 × 480 pixel
Battery (R&S®HA-Z306 option) capacity 72 Wh
voltage 11.25 V (nom.)
operating time with new, fully charged battery up to 9 hrs
Dimension W × H × D 202  mm × 294 mm × 76 mm
(8.0 in × 11.6 in × 3 in)
Weight 2.5 kg (5.5 lb)

Available options

Performance
Produit
Désignation
R&S®ZPH-B4

Numéro de commande 1321.0380.02

Désignation

Frequency Upgrade

R&S®ZPH-B22

Numéro de commande 1334.5627.02

Désignation

Preamplifier

General purpose
Produit
Désignation
R&S®ZPH-K1

Numéro de commande 1334.5604.02

Désignation

Spectrum analysis measurement application

R&S®ZPH-K7

Numéro de commande 1334.5633.02

Désignation

Modulation analysis AM/FM

(requires R&S®ZPH-K1)

R&S®ZPH-B10

Numéro de commande 1321.0396.02

Désignation

GPS Support

R&S®ZPH-K9

Numéro de commande 1321.0415.02

Désignation

Power Sensor Support

R&S®ZPH-K19

Numéro de commande 1321.0409.02

Désignation

Channel Power Meter

R&S®ZPH-K105

Numéro de commande 1334.7207.02

Désignation

EMF Measurement Applications

Radar
Produit
Désignation
R&S®ZPH-K29

Numéro de commande 1321.0421.02

Désignation

Pulse Measurements with Power Sensor

Interference analysis
Produit
Désignation
R&S®ZPH-K15

Numéro de commande 1334.5640.02

Désignation

Interference Analysis

(requires R&S®ZPH-K1)

R&S®ZPH-K16

Numéro de commande 1334.5656.02

Désignation

Signal strength mapping measurement application

(requires R&S®ZPH-K1)

Vidéos associées

Mesures de câbles et antennes rapides et efficaces sur le terrain

Lors de l'installation et la maintenance de systèmes d'antennes de communications mobiles, l'essentiel est de réaliser des mesures sur un port rapidement et correctement dès la première fois. Le R&S®ZPH de Rohde & Schwarz est l'outil adapté pour les tâches de mesure rapides et efficaces sur le terrain.

juin 17, 2021

Analyse approfondie de CERTIUM® ANALYSIS

La large gamme de solutions de test et mesure RF et numériques de Rohde & Schwarz, à la fois pour configurer et entretenir la chaîne de communication complète de l'ATC.

avr. 14, 2021

Utilisation des réglages de déclenchement fenêtrés du FPH pour un signal 5G en direct

Avec la fonction de déclenchement fenêtrée du R&S®Spectrum Rider FPH ou du R&S®Cable Rider ZPH (modèle v.12 avec l'option ZPH-K1), il est possible de masquer le signal de la liaison descendante et de se concentrer sur les activités de la liaison montante.

juil. 22, 2020

Vidéo produit relative aux fonctions du R&S®ZPH

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field.

févr. 22, 2019

Vidéo produit du R&S®ZPH

The R&S®Cable Rider ZPH is a one-port analyzer that has all the essential basic measurement capabilities required for installing and maintaining antenna systems in the field.

oct. 09, 2018

Testeur portable économique dédié à l'installation et à la maintenance sur le terrain présenté au GSMA MWC 2017

Lors du congrès mondial de la téléphonie mobile (GSMA) 2017 à Barcelone, Rohde & Schwarz a présenté son dernier analyseur de câbles et d'antennes monoport.

juil. 12, 2018

Autres informations

Promotion sur les analyseurs de spectre et de réseaux vectoriels

Jusqu'à 36% de remise sur la plus large variété de produits entièrement équipés.

Plus d'information

Tests des réseaux mobiles

Les solutions Rohde & Schwarz dédiées aux tests de réseaux mobiles vous permettent de répondre aux problématiques d'aujourd'hui et du futur.

Plus d'information

Logiciel d'enseignement dédié aux laboratoires étudiants multi-utilisateurs

Le logiciel R&S®CDS campus dashboard simplifie l'enseignement des groupes d'étudiants au sein des laboratoires équipés de plusieurs bancs de travail.

Plus d'information

Request information

Do you have questions or need additional information? Simply fill out this form and we will get right back to you.

Marketing de permission

Votre demande a bien été envoyée ! Nous vous contacterons dans les plus brefs délais.
An error is occurred, please try it again later.
Informations générales et conditions d'utilisation du site Web

Manufacturer's recommended retail price (MSRP). The price shown does not include VAT. Prices and offers are only intended for entrepreneurs and not for private end consumers.

You may use the electronic signature via DocuSign to submit your information to enroll with the Rohde & Schwarz Customer Delegated Administration program. DocuSign processes the information provided according to their . The minimum system requirements for using the DocuSign system may change over time. The current system requirements are found

Termes & Conditions du tirage au sort relatif aux 10 ans des oscilloscopes Rohde & Schwarz

1. Le tirage au sort “10 years Rohde & Schwarz oscilloscopes” est organisé par Rohde & Schwarz GmbH & Co. KG, Mühldorfstraße 15, 81671 Munich, Allemagne, Tel. +49 89 41 29 0 (référencé ici par “R&S").

2. Tous les participants peuvent s'inscrire au tirage au sort du 01 janvier 2020 au 31 décembre 2020 avec leur nom, le nom de leur entreprise et leur courriel professionnel.

3. La participation est gratuite et ne dépend pas de l'achat de biens ou de services.

4. Le tirage au sort est uniquement ouvert aux entités juridiques et seules les personnes morales peuvent gagner les prix. Une personne physique n'est pas autorisée à participer en son nom propre et pour son propre compte, mais en tant que représentant d'une entité juridique en remplissant le formulaire de participation au nom et pour le compte de l'entité juridique.

5. Les prix à gagner sont 1 des 10 R&S®RTB2000 au cours de la période allant du 1 janvier 2020 au 31 décembre 2020 :

Prix : 1x oscilloscope numérique R&S®RTB2000

6. Le tirage au sort aura lieu au siège social de Rohde & Schwarz, Muehldorstrasse 15, 81671 Munich. Les gagnants des prix seront informés par courriel sous 5 jours ouvrés.

7. Le représentant autorisé de l'entité juridique devra informer Rohde & Schwarz qu'il accepte le prix. En cas de refus d'acceptation, ou sans aucune réponse dans les deux semaines, un nouveau gagnant sera tiré au sort. Si aucun gagnant ne se manifeste sous quatre semaines, le tirage au sort prend fin et le prix est perdu.

8. Les employés R&S et les membres de leurs familles, ainsi que toute personne participant au processus du tirage au sort et les membres de leurs familles sont exclus du formulaire de participation.

9. Aucun équivalent en argent ou échange de prix n'est autorisé. Les prix ne sont pas transférables. Tous les impôts, les prélèvements, les droits, les taxes et toutes autres charges perçus dans le pays du participant sont à la charge du participant.

10. Les données personnelles seront traitées uniquement dans le cadre de ce tirage au sort et supprimées quatre semaines après celui-ci, sauf indication contraire.

11. Tout participant qui ne respecte pas ces Termes & Conditions peut être disqualifié par Rohde & Schwarz de ce concours. Dans un tel cas, les prix peuvent également être retirés de manière rétroactive. Dans le cas où un prix est retiré de manière rétroactive à cause du non-respect de ces conditions, il devra être retourné par le participant en question à ses frais à l'adresse Rohde & Schwarz mentionnée au point n°1 et un nouveau gagnant sera tiré au sort.

12. Les participants ne peuvent pas réclamer les prix de ce tirage au sort et aucune procédure juridique n'est autorisée à cet égard.

13. Le tirage au sort et toute relation contractuelle qui en découle entre Rohde & Schwarz et le participant respectif sont régis et interprétés conformément aux lois de l'Allemagne, sans aucun recours au conflit de lois. Les tribunaux de Munich, Allemagne, sont seuls compétents en cas de litige émanant directement ou indirectement de la participation à ce concours.

* “fast delivery” inside 7 working days applies to the Rohde & Schwarz in-house procedures from order processing through to available ex-factory to ship.