Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
Search Application Notes & Cards
Learn how to configure Rohde & Schwarz products to fit your application. Search our database by product, technology, or application to find relevant technical documents.
308 Results
Due to recent security concerns, ultrawideband (UWB) technology is making its way into automotive key fobs. Rohde & Schwarz offers a flexible test solution for the high demands of R&D and highthroughput production environments.
21-Mar-2017
Increasing demands on power distribution networks have resulted in smaller DC rails, as well as a proliferation of rails that ensure clean power reaches the pins of integrated circuits.
07-Mar-2017
Its dual-path concept plus its ability to duplicate baseband signals make the R&S®SMW200A vector signal generator ideal for efficient GSM/EDGE AMsuppression conformance testing.
28-Feb-2017
The R&S®EDST300 efficiently and precisely analyzes TACAN and DME ground stations, making it ideal for commissioning and regular maintenance.
16-Feb-2017
The R&S®CMW Wideband Radio Communication Tester offers an elaborate parametric test concept, including all RF test cases up to Bluetooth®5, that makes this flexible test platform ideal for designing and verifying Bluetooth® Low Energy (LE) circuitsand modules.
27-Jan-2017
The R&S®FSW signal and spectrum analyzer provides the high dynamic range needed to accurately measure the ON/OFF power of your transmitter in accordance with 3GPP TS 36.141.
17-Jan-2017
Phase stability over time is a key characteristic for phase-coherent signals. A common 1 GHz reference signal maintains high phase stability between the RF outputs of multiple R&S®SGT100A SGMA vector RF sources.
09-Jan-2017
CLGD, FSW, Applicataion Card, CATV, DOCSIS 3.1 DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW DOCSIS 3.1 BER testing on CATV amplifiers with R&S®CLGD and R&S®FSW CLGD, FSW, Applicataion Card, CATV, DOCSIS 3.1 DOCSIS 3.1 BER testing on CATV amplifiers with R&S ® CLGD and R&S ® FSW DOCSIS 3.1 BER testing on CATV amplifiers with R&S®CLGD and R&S®FSW CLGD, FSW, Applicataion Card
06-Dec-2016
SMW200A, SMZ90, Pulse Sequencer software, vector signal generator, frequency multiplier, Automotive radar sensors, Testing automotive radars Testing automotive radars against norm interferers; The R&S ® Pulse Sequencer software simulates arbitrary RF environments and supports the generation of radar norm interferers to test automotive radars operating in the 24 GHz, 77 GHz and 79 GHz frequency band
20-Oct-2016
With continuously increasing data rates, signal inte grity aspects of high-speed digital designs and the components used become more and more challenging. Particularly at higher data rates, vector network analyzers (VNA) are increasingly replacing traditional time domain reflectometry (TDR) setups for testing passive components such as connectors, cables and PCBs. Users benefit from the higher accuracy, speed and ESD robustness of the VNA, making the VNA the instrument of choice in this field.
20-Sep-2016
The R&S®SMW200A vector signal generator with the R&S®SMW-K78 radar echo generation option tests L-/S-/X-/Ku-band radars up to 40 GHz RF frequency more flexibly than ever before. Since it allows the object range, radial velocity and radar cross section (RCS) of radar echo signals to be configured, it is ideal for radar development, maintenance and training.
08-Sep-2016
LTE is becoming the predominant wireless technology. Among several new features of this standard, the multiple input multiple output (MIMO) technology offers various advantages. It improves the throughput, extends the reach, reduces interference and improves the signal to interference plus noise ratio (SINR) with beamforming. LTE supports various modes in order to optimize the transmission settings. An LTE MIMO base station consists of a baseband unit, a remote radio head (RRH) and an array of up to eight antennas. The RRH upconverts the digital signals of the baseband unit into analog signals for each antenna.
16-Aug-2016
Rohde & Schwarz mobile network testing solutions enable operators to efficiently increase network capacity via hardware-related, capacity-enhancing features such as antenna tilt optimization, carrier aggregation, 4x4 MIMO and 6-sector sites.
09-Aug-2016
Analyze near-field signals and reduce electromagnetic interference (EMI) on boards and modules with the R&S®SpectrumRider FPH and the R&S®HZ-15 near-field probes.
27-Jun-2016
The R&S®FPS-K18 amplifier measurement option in combination with the R&S®FPS signal and spectrum analyzer and the R&S®SGT100A SGMA vector RF source enables high-speed amplifier characterization.
13-Jun-2016
A new phase noise test instrument covers the frequency range from 1 MHz to 50 GHz with direct down-conversion analog I/Q mixers and baseband signal sampling. The traditional PLL has been replaced by a digital FM demodulator for phase detection and frequency tracking. An additional AM demodulator enables concurrent measurement of phase and amplitude noise. The instrument can measure phase noise as low as -183 dBc/Hz with a 100 MHz carrier frequency and 10 kHz offset within two minutes.
09-May-2016
Particle acceleration requires cavity resonators that are driven with high RF powers at defined frequencies. Rohde & Schwarz offers RF solid-state amplifiers for frequencies ranging from 9 kHz to 6 GHz, delivering CW power up to 80 kW.
27-Apr-2016
Embedded power supplies combine traditional power supply components with multiple sensors, processing and control logic as well as digital communications interfaces. Test equipment for debugging requires isolated input channels for measurements of hazardous voltages. Additional digital channels support the analysis of digital signals, while trigger and decode capabilities are essential for time-correlated monitoring of serial protocol-based communications interfaces.
26-Apr-2016
The new R&S®DATA-NPT mobile network performance test from Rohde & Schwarz brings innovation to network performance testing. The patent-pending testing solution is a very compact and resource-saving implementation of a new measurement procedure that simultaneously measures the maximum data capacity and the minimum continuous connectivity in a mobile network.
21-Apr-2016
The R&S®FSW signal and spectrum analyzer offers fast and easy-to-use transmitter testing for the demanding DOCSIS 3.1 cable modem (CM) and cable modem termination system (CMTS) requirements.
12-Apr-2016
The super-resolution DF method determines bearings of multiple emissions on the same frequency. This method detects signals in the spectrum that are concealed by other emissions. The super-resolution DF method also allows users to take bearings on these emitters, which are undetectable by direction finders that do not feature this method.
04-Mar-2016
One of the key advantages of USB power delivery (USB PD) supported by USB Type-C™ connectors is the capability to transmit power up to 100 W. Using low speed signaling, the devices negotiate a USB PD profile. Suppliers of USB Type-C components and device vendors utilizing the USB PD standard need to ensure interoperability in terms of protocol handshake and signal integrity.
27-Jan-2016
The R&S®Scope Rider is a modern versatile handheld oscilloscope featuring lab oscilloscope performance in a portable format with the ruggedness of a battery operated handheld device. Its superior performance is the best in its class.
04-Jan-2016
In addition to the generic edge trigger, modern oscilloscopes offer triggers that are specialized to address specific problems.
04-Jan-2016
Signal faults and anomalies can cause electrical and electronic systems to fail. Especially in the field, these errors can lead to system downtimes and produce high costs. Consequently, finding them quickly and efficiently as well as identifying their source are crucial.
30-Dec-2015
Its high measurement speed makes the R&S®EVS300 level and modulation analyzer ideal for reliable ILS runway measurements at maximum speed.
16-Dec-2015