R&S®FSMR Measuring Receiver
All-in-one calibration of signal generators and attenuators
-
Measuring Receiver
All-in-one calibration of signal generators and attenuators
-
R&S®FSMR-B2 Order No. 1157.1903.26YIG Preselection, 3.6 GHz to 26.5 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B223, for R&S®FSMR26
-
R&S®FSMR-B2 Order No. 1157.1903.43YIG Preselection, 3.6 GHz to 43 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B223, for R&S®FSMR26
-
R&S®FSMR-B223 Order No. 1157.1955.26YIG Preselection with 20 dB Preamplifier, 3.6 GHz to 26.5 GHz
not with R&S®FSMR-B23 and R&S®FSMR-B2, for R&S®FSMR26
-
R&S®FSMR-B2 Order No. 1157.1903.50YIG Preselection 3.6 GHz to 50 GHz for FSMR 50
for R&S®FSMR50 only
-
R&S®FSU-B4 Order No. 1144.9000.02OCXO, low aging/improved phase noise at 10 Hz carrier offset
-
R&S®FSU-B9 Order No. 1142.8994.02Tracking generator 100 kHz to 3.6 GHz
-
R&S®FSU-B12 Order No. 1142.9349.02Output Attenuator, 0 dB to 70 dB
requires R&S®FSU-B9
-
R&S®FSMR-B18 Order No. 1303.0400.14Removable Hard Disk
-
R&S®FSMR-B19 Order No. 1303.0600.04Second Hard Disk for FSMR-B18
requires R&S®FSMR-B18
-
R&S®FSMR-B23 Order No. 1157.0907.05RF Preamplifier 3.6 GHz to 26 GHz for R&S FSMR 26
requires R&S®FSU-B25, not with R&S®FSMR-B2 and R&S®FSMR-B223, for R&S®FSMR26 only
-
R&S®FSMR-B73 Order No. 1169.5696.02Vector signal analysis for FSMR
28 MHz demodulation bandwidth, demodulation hardware included
-
30 dB Preamplifier, 100 kHz to 50 GHz
only for R&S®FSU26, R&S®FSU43, R&S®FSU46, R&S®FSU50, not available for R&S®FSU50,
model .49 , excludes R&S®FSU-B23, R&S®FSU-B25 -
R&S®FSU-B25 Order No. 1144.9298.02Electronic Attenuator, 0 dB to 30 dB, and 20 dB Preamplifier (3.6 GHz)
not available for R&S®FSU50,
model .49 and R&S®FSU67 -
R&S®FSMR-Z2 Order No. 1169.4954.02Attenuation Calibration Kit
-
R&S®RT-ZA9 Order No. 1417.0909.02N(m) Adapter for R&S®RT-Zxx oscilloscope probes
for use with signal and spectrum analyzers
-
VOR/ILS Measurement Demodulator
for R&S®FSMR/R&S®FSU/R&S®FSQ - Analysis for VOR and ILS signals
-
R&S®FS-K30 Order No. 1300.6508.02Application Firmware for Noise Figure and Gain Measurements for R&S®FSP, R&S®FSU and R&S®FSQ (preamplifier recommended, e.g. R&S®FSU-B23, R&S®FSU-B24, R&S®FSU-B25)
Outperforming any conventional noise measurement system
-
R&S®FS-K5 Order No. 1141.1496.02
-
R&S®FS-K72 Order No. 1154.7000.023GPP BTS/Node B FDD Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers
-
R&S®FS-K73 Order No. 1154.7252.023GPP UE FDD Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers
-
R&S®FS-K74 Order No. 1300.7156.023GPP HSDPA BTS Application Firmware
3GPP transmitter measurements with R&S®FSQ signal analyzers and R&S®FSU, R&S®FSG, R&S®FSUP, R&S®FSMR, R&S®FMU and R&S®FSP spectrum analyzers.
Requires R&S®FS-K72 -
R&S®FS-K76 Order No. 1300.7291.023GPP TD-SCDMA BTS Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP
-
R&S®FS-K77 Order No. 1300.8100.023GPP TD-SCDMA UE Application Firmware
Base station and mobile station tests on TD-SCDMA with the R&S®FSQ, R&S®FSU and R&S®FSP
-
R&S®FS-K82 Order No. 1157.2316.02
-
R&S®FS-K83 Order No. 1157.2416.02
-
R&S®FS-K84 Order No. 1157.2851.02CDMA2000®/1xEV-DO BTS Application Firmware
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP
-
R&S®FS-K85 Order No. 1300.6689.02CDMA2000®/1xEV-DO MS Application Firmware
Transmitter measurement on 3GPP2 signals with Signal Analyzer R&S®FSQ and Spectrum Analyzers R&S®FSU and R&S®FSP