R&S®ELEKTRA Test Software - Mediacenter

Tools setting

Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test basics.

26-Feb-2024

Hardware setup

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the test hardware.

26-Feb-2024

Run test

Learn in this short video about R&S®ELEKTRA EMC test automation software how to run the test.

26-Feb-2024

Attenuation Table

Learn in this short video about R&S®ELEKTRA EMC test automation software how to assign the attenuation table.

26-Feb-2024

Reference Calibration Test Report

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the reference calibration and the test report.

26-Feb-2024

Test Template

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create a test template

26-Feb-2024

Device List

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the devices..

26-Feb-2024

Test Report Configuration

Learn in this short video about R&S®ELEKTRA EMC test automation software how to configure the test report.

26-Feb-2024

System path calibration

Learn in this short video about R&S®ELEKTRA EMC test automation software how to calibrate the system path..

26-Feb-2024

Path switching

Learn in this short video about R&S®ELEKTRA EMC test automation software how to set up the signal path switching.

26-Feb-2024

EUT Test Template

Learn in this short video about R&S®ELEKTRA EMC test automation software how to create the EUT test template.

26-Feb-2024

Automotive measurements with R&S®ELEKTRA

In this webinar, we will give a general introduction to our new EMC software ELEKTRA and highlight some features with are relevant for automotive standards.

29-Jun-2021

R&S®AdVISE Visual Inspection Software - Monitoring of Rotating Objects

This video shows how to use R&S®AdVISE to monitor the number of revolutions of rotating objects.

15-Sep-2020

R&S®AdVISE Visual Inspection Software - Monitoring of Analog Indicators

This video shows how to use R&S®AdVISE to monitor analog indicator.

15-Sep-2020

R&S®ELEKTRA automated vs. interactive mode

Explanation of the difference of automated and interactive mode in R&S®ELEKTRA.

14-May-2020

R&S®ELEKTRA field uniformity

Description on how to perform a field uniformity measurement.

14-May-2020

R&S®ELEKTRA creating a report

How to create a report in R&S®ELEKTRA.

14-May-2020

R&S®ELEKTRA defining and applying factors

Overview of how to define and apply frequency lists, attenuation factors, transducer factors and limit lines.

14-May-2020

R&S®ELEKTRA connecting devices

Overview on how to connect devices to R&S®ELEKTRA within the device list.

14-May-2020

R&S®ELEKTRA launching software

How to launch the R&S®ELEKTRA software and use the configuration wizard to load preconsidered test information and setups.

14-May-2020

R&S®ELEKTRA creating a test template

Overview of how to create and configure a test template.

14-May-2020

R&S®ELEKTRA executing a test

Overview of how to execute a test in R&S®ELEKTRA.

14-May-2020

R&S®ELEKTRA saving and recalling results

How to save and recover test results in R&S®ELEKTRA.

14-May-2020

R&S®ELEKTRA hardware setup

Overview of how to configure the hardware setup.

14-May-2020

R&S®ELEKTRA overview

What is R&S®ELEKTRA, what is it used for and how does it work in general?

05-May-2020

R&S®ELEKTRA installing or upgrading

Information regarding system requirements, the installation and upgrading process.

05-May-2020

R&S®ELEKTRA licenses managing

Explanation of what is needed for the magaging process and how it is implemented.

05-May-2020

R&S®ELEKTRA GUI tour

A quick tour around the graphical instruments of the software.

05-May-2020

R&S®ELEKTRA 4 layers principle

Explanation of this principle and how it is implemented in the test process of R&S®ELEKTRA.

05-May-2020

R&S®ELEKTRA report templates

Introduction of report templates whoch can be used to make a final report.

05-May-2020

R&S®ELEKTRA database - Back up

This video covers how to backup an R&S®ELEKTRA database.

05-May-2020

R&S®ELEKTRA database - Importing and exporting

Description on how to import or export a database.

05-May-2020

R&S®ELEKTRA top 5 tips & tricks

Five tips and tricks to maximize the effectiveness of using R&S®ELEKTRA.

05-May-2020

R&S®ELEKTRA EUTs

This video will introduce how to setup EUTs (equipment under test).

05-May-2020

Intuitive user interface

25-Oct-2018

Increasing your test throughput

25-Oct-2018

Getting started quickly

23-Oct-2018