New Unified Firewall models join cloud based SD-SECURITY by LANCOM

LANCOM addresses the release of new LANCOM R&S®Unified Firewall models. The UF-910 with full hardware redundancy for large locations is availaibe now.

LANCOM SD-WAN for distributed networks already planned with 5G router support

LANCOM addresses the release of a 5G router later this year as a completion of the already very successful LANCOM SD-WAN solution called LMC.

How R&S®PACE2 classifies IP traffic despite encryption and NAT

The video explains how application classification and extraction of metadata and content reveal actionable information from IP traffic. Learn how advanced detection methods even allow for network adress translation (NAT) visibility and classification of encrypted traffic.

Compact and flexible CATR system for 5G FR2 testing

Rohde & Schwarz presents the most compact CATR solution R&S®ATS1800C. The system allows to test heavier mmWave devices in a big quiet zone yet on a small chamber footprint.

5G NSA signaling testing for FR2

For developers of 5G devices, Rohde & Schwarz features the R&S®CMX500 radio communication tester that enables non-standalone (NSA) and standalone (SA) signaling tests in both FR1 and FR2 frequency ranges.

Compact CATR OTA chamber for 5G FR2 testing

Signaling test in the new mmWave-based 5G frequency of FR2 requires an OTA test setup. The R&S®ATS800R CATR rack based antenna test system is designed for FR2 over-the-air measurements in R&D.

5G NR maximum IP data throughput tests of 2 Gbps

In this video, the R&S®CMX500 establishes an LTE anchor cell and a 5G NR TDD cell, configured with 4x4 MIMO and modulation of DL 256QAM to achieve a maximum data end-to-end throughput of 2 Gbps on IP layer using TCP data with a Qualcomm Snapdragon X55 modem.

5G network interactivity test - short

With the interactivity test, operators can measure the fundamental 5G network performance characteristics of latency, throughput and availability and derive network quality for real-time applications like eGaming and AR/VR in a single integrated test.

Turnkey RF test solution for 5G FR2 devices

High-volume testing in the mmWave frequency range (FR2) requires an over-the-air environment. The R&S®CMPQ test solution provides accurate and reliable measurement results under radiated conditions for 5G NR non-signaling tests in FR2.

5G FR2 base station testing over the air

Rohde & Schwarz presents a unique solution for OTA tests on 5G NR base stations in the FR2 range. The new R&S®FE44 frontend modules support up-/downconversion of lower-frequency IF signals to RF.

High performance RF testing for 5G BTS production

Rohde & Schwarz Server-Based Testing (SBT) supports customers in accelerating their measurement tasks in automated production and component characterisation environments.

Cellular V2X testing in R&D and production

Cost and time saving C-V2X scenario simulation with the evolution of the C-V2X framework of the Rohde & Schwarz hardware with CANoe.car2x and dyna4 virtual test tools it is now possible to simulate traffic jam scenarios. Watch the video

5G NSA signaling testing with dynamic spectrum sharing

The verified test solutions from Rohde & Schwarz, based on the R&S®CMX500 and R&S®CMW500 radio communication testers and the R&S®CMsquares unified test software, simplifies signaling testing with DSS in non-standalone (NSA) mode.

T&M for wireless communications technology

Since MWC2020 in Barcelona will not take place, Rohde & Schwarz will bring their latest T&M innovations for 5G devices, base stations and 5G mobile networks, as well as for connected cars, smart factories and 5G broadcast technology to your displays.

5G multichannel MIMO testing for FR1

Rohde & Schwarz presents cross-channel measurements up to 4x4 MIMO on 5G transmissions in the FR1 range for the development and verification of 5G base stations and small cells.

WLAN 802.11ax AP and station testing under realistic operation conditions

Rohde & Schwarz presents an IEEE 802.11ax test solution for WLAN access points and stations in multi-user operation (OFDMA).

Interference hunting in 5G networks

Rohde & Schwarz introduces the new R&S®PR200 portable monitoring receiver and in particular the gated spectrum trigger function that enables users to effectively separate uplink and downlink TDD signals, on the spectrum display.

Wake up signal test for improved power efficiency in NB-IoT devices

Rohde & Schwarz and Goodix (CommSolid) are first to demonstrate exhaustive test functions for the newly introduced NB-IoT wake up signal (NWUS), the latest 3GPP Release 15 feature for NB-IoT devices to further reduce power consumption.

Most compact 5G conformance test system for mmWave (FR2)

Rohde & Schwarz presents its innovative 5G conformance test solution for both FR1 and FR2. The latest version of the popular R&S®TS8980 RF test system now covers 5G NR.

Highly efficient Wi-Fi 6 plus Multi-Gigabit Ethernet switches

LANCOM addresses how organizations can realize powerful LAN and WLAN infastructures based on WiFi-6 access points and multi-gigabit ethernet switches - designed for data-intensive applications today and tomorrow. Including software defined cloud management.

5G multicast solution

Thanks to this solution, mobile network operators can face congestion and overload in their cellular networks when it comes to delivering highly critical live events and linear content which constitutes a big portion of video consumption.