93 Results
The R&S®RTP and R&S®RTO2000 oscilloscopes are capable of characterizing high speed datacom interfaces and performing in-depth signal integrity analysis.
31-Mar-2021
Thanks to their multichannel capability, oscilloscopes are ideal for multichannel applications such as the analysis of MIMO, multi-antenna radar and differential high-speed digital signals.
06-May-2020
The R&S®RTO Oscilloscope supports the acquisition and the detailed signal analysis of these signals by using the history mode. The history mode allows the user to look back to previous acquisitions and apply the wide set of analysis functions of the RTO.
03-Jun-2013 | AN-No. 1TD02
This application note describes two test solutions from R&S® to cope with the 5G FR1 downlink MIMO signal analysis challenges either using R&S®RTP/RTO oscilloscope or R&S®NRQ6 frequency selective power sensor.
26-Jun-2020 | AN-No. GFM343
This application note introduces the working principles of a conventional trigger system and explains the advantages of the real-time capable digital trigger of the RTO oscilloscopes.
11-Apr-2012 | AN-No. 1ER04
This application note presents the Jitter analysis capabilities of the R&S®RTO for digital signals. It demonstrates the basic operation with an application example, and shows the associated jitter analysis.
29-Aug-2013 | AN-No. 1TD03
This application note explains the background of blind time and points out why a high acquisition rate is important. It furthermore explains the R&S RTO oscilloscope capabilities and how they help for faster debugging, measurement and analysis.
17-May-2011 | AN-No. 1ER02
Differential measurements with Spectrum Analyzers and Probes
28-Jun-2013 | AN-No. 1EF84
Ethernet communications has been introduced in automotive networks to enable fast and cost efficient data communications.
27-Mar-2015
The application fields of oscilloscopes extend to EMI debugging because of their powerful and easy-to-use FFT analysis capabilities– and save time and money.
23-Sep-2019
This application note describes the possibilities to measure LTE MIMO with the LTE-Software R&S®FS-K102/K103PC in combination with an R&S®RTO1044 oscilloscope.
24-Apr-2013 | AN-No. 1EF86
This application note describes the configuration of a Miracast wireless video transmission system and how to measure delay times.
01-Oct-2015 | AN-No. 1MA250
For measurement settings below 10 mV/div, oscilloscopes typically reduce the measurement bandwidth in order to keep the trace noise as low as possible. The R&S®RTO is different: It offers the full bandwidth even for the most sensitive settings, and an A/D converter with more than 7 effective bits (ENOB) digitizes the signal.
13-Jul-2012
Read this application card to learn more about what the 10BASE-T1S Ethernet compliance test offers and how it ensures reliable operation and functionality.
15-May-2020
Developers can now use an oscilloscope for all necessary measurements with the R&S®RTO2000 multi-domain oscilloscope.
16-Jul-2018
The Rohde & Schwarz oscilloscope R&S®RTO2064 with powerful FFT analysis is great for EMI debugging and a low cost solution for R&D testing.
14-Jan-2021
Setting up complex real-time trigger conditions using the R&S®RTE and R&S®RTO oscilloscopes increases the test coverage and robustness of converter and inverter systems.
10-Aug-2020
This application note aims to explain test procedures and characterization of the relevant parameters for active phased array antennas.
04-Jul-2016 | AN-No. 1MA248
This application note highlights various aeronautical radio navigation signals such as VHF omnidirectional radio range (VOR), instrument landing system (ILS) for glide slope (GS) and localizer (LLZ), as well as marker beacon (MB).
01-Feb-2012 | AN-No. 1MA193
Simulation can be a big time-saver when designing EMI filters for DC/DC converters. However, simulated results can differ significantly for different tools if simulated models are not accurate or do not cover all the relevant components.
21-Sep-2021
Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.
27-Apr-2023
Assisting Tools for Operation of Windows-Based T&M Instruments
13-Jun-2013 | AN-No. 1MA218
Correlated time-frequency measurements help optimize gate driving and minimize electromagnetic emissions early on during development.
22-Nov-2018
This application note introduces the IVI High Speed LAN Instrument Protocol (HiSLIP) and outlines its features. HiSLIP is the successor to the VXI-11 LAN remote control protocol. This document also describes guidelines for using this protocol.
12-Nov-2014 | AN-No. 1MA208
MIPI D-PHY is a low-power, cost-effective physical layer interface, essential in mobile devices and advanced technology systems. It's a high-speed, source-synchronous interface used in smartphone cameras, smartwatch displays, drones, in-car entertainment, automobile cameras, and radar sensors. This application note explores MIPI D-PHY's features, functionality, and testing practices for device compliance, addressing common issues. It highlights Rohde & Schwarz's equipment for ensuring compatibility and solving issues with MIPI D-PHY, aligned with MIPI D-PHY specification version 2.5.Developed by the MIPI Alliance, D-PHY connects cameras and displays to a host processor via CSI-2 or DSI protocols. It features a master-slave, asymmetrical design for reduced link complexity. Key aspects include a unidirectional clock, optional data signal directions, different data rates for half-duplex operation, point-to-point communication, and high-speed (HS) and low-power (LP) modes for data transfer and battery preservation. In HS mode, D-PHY uses differential signaling with specific impedance, while in LP mode, it operates in a single-ended manner with high impedance termination.The application note from Rohde & Schwarz provides insights into characterizing and debugging MIPI D-PHY, offering conformance verification with MIPI Alliance standards and protocol decoding options.
31-Jan-2024 | AN-No. 1SL410
This app note provides an introduction into the various jitter components and elucidates the commonly available jitter separation frameworks.
08-Dec-2021 | AN-No. 1SL375
This document describes a method to separate common-mode and differential-mode separation using two oscilloscope channels. This separation approach works without any additional hardware component.
17-Sep-2020 | AN-No. GFM353
The R&S®VSE is a powerful tool for comprehensive analysis of a variety of signals, providing full support to the Rohde & Schwarz oscilloscope advanced trigger system.
03-Feb-2021
The R&S®RTx-K50 option expands the addressable range of interface standards by adding decoding capability for standardized and proprietary Manchester or NRZ coded buses.
19-Oct-2020
This paper explains how to use the Rohde & Schwarz IVI.NET instrument drivers in a Visual Studio environment.
31-May-2016 | AN-No. 1MA268